Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Studio City · 24/7 mobile

Panic Bar Installation in Studio City, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware in Studio City, 24/7. We are fully mobile and come to your business or building. For restaurants, shops, offices and studios along Ventura Boulevard, call (323) 997-8867.

  • Mobile to your Studio City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of door hardware nobody thinks about until it matters. It has to release the door under pressure, every time, with no key, no knob twist and no special knowledge. In Studio City, that includes restaurants and retail along Ventura Boulevard, offices and production spaces near Radford Studio Center, school and event buildings, and multi-unit properties where a rear or stairwell door doubles as an exit.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar built the business on commercial hardware work like this. We install new panic bars and exit devices, replace worn or failed ones, and repair devices that stick, rattle, fail to latch or no longer retract smoothly. We are fully mobile, so there is no storefront to visit. We come to your door.

The work is more than bolting a bar to a door. Door material, door width, latch type, how the door swings and what the exterior side needs all affect which device is right. Many Ventura Boulevard storefronts use narrow aluminum-stile doors that need devices made for that profile, while older buildings may have wood or hollow metal doors with their own requirements. We talk through how the door is used before we recommend hardware.

How it works in Studio City

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us what kind of door it is, whether it is aluminum storefront, hollow metal or wood, how it is used, and what is wrong or what you want installed. This helps us bring suitable hardware.

  2. 2

    On-site assessment

    We come to your location in Studio City and look at the door, frame, existing hardware and how people use it. We check swing direction, door width, stile profile and whether the exterior side needs a key cylinder, trim or no outside access at all.

  3. 3

    Hardware recommendation

    We explain the options in plain language, such as rim, surface vertical rod or mortise devices, and whether alarmed or dogged-down functions suit your setup. You decide before we start. Final code requirements for your occupancy are determined by your local authorities, so we encourage checking with them where it applies.

  4. 4

    Installation or repair

    We mount the device, align the strike, set the latch and test retraction. On repairs we diagnose the cause, whether it is a bent rod, worn latch, loose mounting or misaligned door, and fix or replace only what is needed.

  5. 5

    Testing and handoff

    We cycle the door repeatedly, confirm it latches securely and releases freely with normal pressure, and show you how any key trim or dogging feature works so your staff know how to use it.

Need panic bar installation in Studio City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: rim, surface vertical rod, concealed vertical rod or mortise, each with different hardware and labor needs.
  • The door itself, including material, width, height and whether it is a narrow-stile aluminum storefront door or a wider hollow metal or wood door.
  • Whether you are installing new, replacing an existing device or repairing one, and how much old hardware must be removed or patched.
  • Extra features such as exterior trim, key cylinders, alarms, delayed egress or electric latch retraction tied to access control.
  • Door and frame condition, since a sagging door or damaged strike area may need adjustment or reinforcement for the device to work correctly.
  • How many doors are being done in one visit and the time of day the service is needed.

Why Studio City chooses us

  • Fully mobile and available 24/7, so a failed exit device on a Ventura Boulevard business can be addressed without waiting for a shop to open.
  • Serving the Los Angeles area since 1987, with owner David Shar leading the commercial hardware work.
  • We match the device to the door, which matters on narrow aluminum storefronts common in Studio City.
  • We test for free release under normal pressure, not just that the bar looks right when mounted.
  • We repair existing devices where that makes sense instead of defaulting to replacement.
  • We can also handle related commercial work like rekeying, door closers and access control on the same visit.

Panic Bar Installation across Studio City

Studio City's commercial mix is unusual. Ventura Boulevard runs as a long strip of aluminum-storefront restaurants, salons, offices and shops, and many have back or side exits that need dependable exit hardware. Around Tujunga Village and the 91604 and 91602 areas, we see older buildings where a rear door has been retrofitted over the years, and devices that have worn from daily deliveries and trash runs.

The studio and production side of the neighborhood adds its own needs. Properties near Radford Studio Center and across 91604 and 91607 include offices, stages and support buildings where doors see heavy traffic and exits must function without fuss. Condo and apartment complexes from the 1960s through the 80s, spread across Studio City and into 91614, often have stairwell and garage doors where exit devices age out and need repair or replacement.

We reach properties from Colfax Meadows and the Silver Triangle to commercial spaces off Laurel Canyon Boulevard and Coldwater Canyon Avenue, and we are used to the traffic patterns on US-101 and Ventura Boulevard. Because we are mobile only, we bring tools and hardware to you wherever the door is.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Studio City locksmith services

See all of our Studio City services, or our citywide panic bar installation page.

Panic Bar Installation in Studio City — FAQs

Do you install panic bars on Ventura Boulevard storefronts?
Yes. Many Ventura Boulevard businesses have aluminum-stile doors that need devices made for narrow profiles. We assess the door and bring suitable hardware. Call (323) 997-8867 to describe yours.
Can you repair a panic bar instead of replacing it?
Often, yes. Sticking, rattling or failure to latch can come from a worn latch, bent rod or misaligned strike. We diagnose first and only recommend replacement when repair does not make sense.
Are you available after hours?
We are available 24/7 and fully mobile. If an exit door will not latch or release properly, call (323) 997-8867 any time and we will help.
What is the difference between a rim device and a vertical rod device?
A rim device latches at the edge of the door, while a vertical rod device latches at the top and sometimes the bottom. The right choice depends on the door type, width and how it is used.
Can the outside of the door still be locked?
Yes. Exit devices can be paired with exterior trim or a key cylinder so the door is secure from outside while always opening freely from inside. Some doors are exit-only with no outside access.
Do you handle panic bars on multiple doors in one visit?
Yes. If you have several exit doors, we can assess and service them together, which can be more convenient for your business and your staff.
Do you tell me what code requires for my building?
We can explain how the hardware works and what features are available, but code requirements depend on your occupancy and are set by local authorities such as the fire department or building officials. We recommend confirming with them.
Do I need to come to a shop?
No. We are mobile only and there is no storefront to visit. We come to your business anywhere in Studio City. Call (323) 997-8867 to get started.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7