Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Studio City · 24/7 mobile

Commercial Door Hardware in Studio City, CA

Crenshaw Lock Company provides 24/7 mobile commercial door hardware repair and replacement in Studio City, California. We service storefront, aluminum-frame and mortise hardware at shops, restaurants, offices and complexes along Ventura Boulevard and beyond. Call (323) 997-8867 and we come to your door, day or night.

  • Mobile to your Studio City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door works harder than almost any other part of a building. It opens hundreds of times a day, gets pushed by delivery carts, and is expected to lock without fuss at closing time. In Studio City, that describes the long run of aluminum-frame storefronts along Ventura Boulevard, where cafes, salons, boutiques and offices depend on doors that latch cleanly and keep customers walking in. When a closer slams, a push bar sticks, or a mortise lock stops turning, the business feels it right away.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner David Shar and the team handle commercial door hardware as a regular part of the work. We are fully mobile and available 24/7. There is no storefront to visit; we bring the tools and a working knowledge of the common hardware found on aluminum-frame and mortise doors to your location.

This page covers repair and replacement of storefront, aluminum-frame and mortise door hardware: how a typical visit goes, what shapes the cost, and what is particular to Studio City buildings. If your door will not secure after hours, call (323) 997-8867 and describe what the door is doing. That usually tells us a lot before we arrive.

How it works in Studio City

  1. 1

    Describe the door and the problem

    When you call, tell us what kind of door it is (aluminum storefront, wood or hollow metal with a mortise lock, a glass door with a patch fitting), what it is doing, and whether it can be locked right now. Photos of the hardware and the frame help us bring the right parts.

  2. 2

    On-site inspection

    We check the lock or exit device, the latch alignment, the closer, hinges or pivots, and the frame itself. Many hardware complaints are really alignment or wear problems, so we look at the whole door rather than just the part you pointed to.

  3. 3

    Repair or replace, explained plainly

    If a repair will hold up, we say so. If a mortise body, cylinder, closer or panic device is worn out or no longer made, we explain why replacement makes more sense and what the options are before any work begins.

  4. 4

    Securing the opening

    For after-hours failures, the first goal is a door that locks. We make the opening secure, then complete the permanent fix on the same visit when the parts allow it.

  5. 5

    Rekeying and key control

    If keys have gone to former employees or a prior tenant, we can rekey the cylinders or set up a new keying arrangement so you know who has access.

  6. 6

    Testing and handoff

    We cycle the door repeatedly, check the latch, closer speed and alignment, and confirm every key works. You get a clear explanation of what was done and what to watch for.

Need commercial door hardware in Studio City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of hardware involved: a basic cylinder swap differs from a mortise lock body, a panic or exit device, or a heavy-duty closer.
  • Whether the problem is repairable or the hardware needs full replacement, including parts that are discontinued or hard to match.
  • The condition of the door and frame. A sagging door or bent aluminum stile may need adjustment work before new hardware will function.
  • How many doors or openings are involved, and whether the work can be done together in one visit.
  • Whether rekeying or a master key setup is part of the job.
  • The time of the call. Because we are 24/7, after-hours and emergency service is available, and the circumstances of the call can affect the quote.

Why Studio City chooses us

  • Fully mobile and available 24/7, so a failed storefront lock at closing time does not have to wait until morning.
  • In business since 1987, with long experience across the aluminum-frame and mortise hardware common in Los Angeles commercial buildings.
  • Owner-led: David Shar is the lead technician, so the people you talk to know the work.
  • We diagnose the whole opening, not just the part you point to, which helps avoid repeat visits for the same door.
  • We tell you when a repair is enough instead of steering you toward replacement, and explain the reasoning when replacement is the better call.
  • We work on both commercial and residential locks, so a business owner with a hillside home or a Ventura Blvd listing can use one provider.

Commercial Door Hardware across Studio City

Ventura Boulevard is the spine of Studio City commerce, and most of it is aluminum-storefront retail and restaurants. Those doors take constant use, and the hardware, from pull handles and patch fittings to closers and deadbolts, wears accordingly. We regularly see the kinds of problems that come with that: latches that no longer catch, closers leaking or slamming, and cylinders worn from years of daily keys. Businesses in ZIP 91604, which covers much of the Ventura Blvd corridor and Tujunga Village, are a natural fit for our mobile service, and we also serve 91602 near Radford Studio Center, 91607 and 91614.

Side streets tell a different story. Around Colfax Meadows and the Silver Triangle, small offices, converted spaces and older mixed-use buildings often have original mortise hardware that can be repaired and kept in service rather than ripped out. The 1960s to 80s condo and apartment complexes found throughout Studio City add another category: shared entry doors, lobby doors and gates that need reliable hardware and sensible key control.

Up toward the Fryman Canyon area and Laurel Canyon, properties lean toward mid-century moderns and gated contemporary estates with driveway gates, intercoms and multipoint locks. We can service those, including gate locks and front-door multipoint hardware after an attempted break-in. Because we are mobile, a call from US-101, Coldwater Canyon or Colfax Avenue reaches the same 24/7 service, and a realtor who needs a Ventura Blvd listing rekeyed between showings can call as well.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Studio City locksmith services

See all of our Studio City services, or our citywide commercial door hardware page.

Commercial Door Hardware in Studio City — FAQs

What kinds of commercial door hardware do you work on in Studio City?
We repair and replace storefront, aluminum-frame and mortise door hardware, including cylinders, mortise lock bodies, push and pull handles, closers and related parts. Call (323) 997-8867 to describe your door.
Are you available after hours if my storefront door won't lock?
Yes. We are available 24/7 and fully mobile. If your Ventura Blvd door will not secure at closing, call (323) 997-8867 and we will work to get the opening locked.
Do you have a shop I can visit?
No. Crenshaw Lock Company is mobile only. We come to your business, home or property in Studio City, so there is no storefront to drive to.
Can you repair old mortise locks, or do they all need replacing?
Many can be repaired. Older mortise hardware is often well built, and we will tell you if a repair will hold. If parts are worn out or unavailable, we will explain the replacement options.
My closer slams or won't latch the door. Is that a hardware or a door problem?
It can be either. Closer speed, latch alignment, hinge wear and a shifted aluminum frame all cause it. We check the whole opening so the fix lasts.
Can you rekey my commercial locks after an employee or tenant leaves?
Yes. We can rekey cylinders so old keys no longer work, and discuss a better key control setup. Call (323) 997-8867 to arrange it.
Do you service gates and multipoint locks on hillside properties?
Yes. We handle driveway gate locks and multipoint front-door hardware, including service after an attempted break-in, on properties near Fryman Canyon and Laurel Canyon.
How is the cost of commercial door hardware work determined?
It depends on the hardware type, whether repair or replacement is needed, the condition of the door and frame, how many doors are involved, rekeying, and the time of the call. We explain the scope before work starts.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7