Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Studio City · 24/7 mobile

Access Control Installation in Studio City, CA

Crenshaw Lock Company installs keypad, card and fob access-control systems for business entrances in Studio City, California. We are a fully mobile locksmith available 24/7, and we come to your door. To talk through your entrance or request a visit, call (323) 997-8867.

  • Mobile to your Studio City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

Studio City has an unusual mix of commercial buildings for a neighborhood its size. Ventura Boulevard runs for miles with aluminum-storefront retail, restaurants, salons and small offices. Tucked behind it are professional suites, medical offices, production-related businesses and older condo and apartment buildings with shared entrances. Every one of these has the same basic question: who should be able to get in, when, and how do you change that without rekeying the whole building every time someone leaves?

Access control answers that question. Instead of handing out copies of a metal key that anyone can duplicate, you issue a keypad code, a card or a fob to each person. When an employee leaves, a contractor finishes a job, or a card goes missing, you deactivate that one credential and everyone else keeps working. For a business with staff turnover, shared back doors or after-hours cleaning crews, that is a real change in how much control you have.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead tech David Shar. We are mobile only, so there is no storefront to visit. We come to your business, look at the actual door, frame and hardware, and install a system that fits how your place operates rather than a one-size package.

How it works in Studio City

  1. 1

    Walk the entrance and talk through who needs access

    We start at your door. We look at the type of door, whether it is aluminum storefront, wood, hollow metal or glass, and how it closes and latches. We also ask who comes and goes, at what hours, and whether you need different levels of access for staff, managers, vendors or tenants.

  2. 2

    Choose keypad, card, fob or a combination

    Keypads are simple and need no hardware for users to carry. Cards and fobs allow individual credentials you can cancel one at a time. Some businesses use a keypad at a back door and cards at the front. We explain the tradeoffs plainly and recommend what suits your door and your staff.

  3. 3

    Confirm the locking hardware and power

    Access control only works if the lock behind it is sound. We check the strike, electric lock or electrified hardware, door closer and frame, and plan how power will reach the reader and lock. On storefront doors with narrow stiles, hardware selection matters, so we plan it before we start.

  4. 4

    Install and wire the system

    We mount the readers or keypads, install the electrified locking hardware, and connect power and control components. We aim for a tidy installation that suits your entrance and does not leave exposed wiring where it can be tampered with.

  5. 5

    Program credentials and test every door

    We set up codes, cards or fobs, then test each one, including a credential that should be denied. We confirm the door locks properly after closing and that the mechanical key override works if you have one.

  6. 6

    Show your team how to manage it

    We walk you or your manager through adding and removing users, and explain what to do if power fails or a credential is lost, so you are not dependent on us for routine changes.

Need access control in Studio City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The number of doors being controlled, since each entrance needs its own reader or keypad and locking hardware.
  • Door and frame type, because glass storefront doors, aluminum frames, wood and steel doors each need different hardware and installation methods.
  • Choice of credential type and system features, such as keypad only versus cards or fobs, and how many users you need to manage.
  • Power and wiring needs, including how easy it is to route power to the door and whether existing hardware can be reused.
  • Whether existing locks, strikes or closers need repair or replacement for the system to work reliably.
  • Timing and scheduling, since after-hours or urgent installations can be arranged but may be priced differently from routine daytime work.

Why Studio City chooses us

  • Fully mobile and available 24/7, so installation can be arranged around your business hours, including before opening or after closing.
  • In business since 1987, which means decades of experience with the doors and hardware found in older Los Angeles commercial buildings.
  • Owner involvement: David Shar leads the work, so you are dealing with someone accountable for the result.
  • We look at the physical door first. Many access-control problems are really door-alignment or latch problems, and we address those instead of selling more electronics.
  • We teach you how to manage users yourself, rather than making you call for every routine change.
  • Straightforward recommendations. If a simple keypad meets your need, we will not push a more complex system.

Access Control across Studio City

Studio City businesses are spread across a few distinct areas, and the entrances differ with each. Along Ventura Boulevard, in ZIP codes 91604 and 91602, you find long rows of storefronts with aluminum-and-glass doors, shared rear alleys and service doors that staff use all day. Those back doors are often where access control pays off most, because a keypad or fob reader lets employees in without key copies circulating. Around Tujunga Village, smaller shops and offices benefit from the same approach on a more modest scale.

Near Radford Studio Center and the surrounding blocks, many businesses support production work, with crews, vendors and short-term contractors coming and going. Credentials that can be issued and canceled individually suit that kind of turnover far better than metal keys. In the residential-commercial mix near Colfax Meadows and the Silver Triangle, we also see older condo and apartment buildings from the 1960s through the 80s with shared entrances that were never updated, which is a common reason property managers call us about access control.

We also work with gated and hillside properties toward Fryman Canyon and Laurel Canyon, where driveway gates, intercoms and multipoint locks are part of the picture, including in ZIP 91604 and the 91607 and 91614 areas. Whatever the setting, we come to you from US-101, Laurel Canyon Boulevard or Coldwater Canyon Avenue, day or night. Call (323) 997-8867 to discuss your entrance.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Studio City locksmith services

See all of our Studio City services, or our citywide access control page.

Access Control in Studio City — FAQs

What is the difference between keypad, card and fob access control?
A keypad uses a code that people enter. Cards and fobs are physical credentials that are tapped or held near a reader. Keypads are simple but codes can be shared, while cards and fobs can be canceled individually. We can recommend one at your door. Call (323) 997-8867.
Can access control be installed on a glass storefront door?
Usually yes, but the hardware has to suit the narrow aluminum stiles typical of Ventura Boulevard storefronts. We look at the door and frame first and select hardware that fits, rather than forcing a standard kit onto it.
What happens if the power goes out?
It depends on how the lock is configured. Some are designed to stay locked and some to release, and many keep a mechanical key override. We discuss which setup makes sense for your business and safety needs before installation.
Can I remove an employee's access without rekeying?
Yes, that is one of the main benefits. You delete that person's code, card or fob, and everyone else keeps working. We show you how to manage this so you do not need to call us for routine changes.
Do you install access control for apartment or condo buildings?
Yes. Many Studio City buildings from the 1960s to the 80s have shared entrances that benefit from updated access control. The right setup depends on the door, how many residents there are and who manages the building.
Can you work outside normal business hours?
Yes. We are mobile and available 24/7, so installation can be scheduled before opening or after closing to limit disruption. Call (323) 997-8867 to arrange a time.
Can you add access control to an existing lock?
Often we can reuse parts of your current hardware, but sometimes the lock, strike or closer is not suited to electronic control. We assess it on site and tell you honestly what can be kept.
Do you have a shop I can visit?
No. Crenshaw Lock Company is fully mobile, so we come to your business in Studio City. That lets us see the actual door and plan the installation properly.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7