Open 24/7 · Greater Los Angeles & Ventura County

Crenshaw Lock

Lock Repair in Studio City · 24/7 mobile

Lock Repair in Studio City, California

Crenshaw Lock Company provides 24/7 mobile lock repair in Studio City, California. We come to your home, condo or business to fix sticking, jammed, loose or misaligned locks, deadbolts and latches, often without replacing them. Call (323) 997-8867 any hour.

  • Mobile to your Studio City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7

A lock that sticks, spins loose, or needs a shoulder-nudge to latch is telling you something. Sometimes the cause is minor, like a door that has shifted or a latch plate that has drifted out of line. Sometimes it is a worn cylinder or a failing mechanism that will eventually leave you locked out or, worse, unable to lock up. In Studio City, where so many homes carry decades of use on their hardware, repair is often the smarter first move than replacement.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar built the business on fixing what can be fixed. We are fully mobile and available around the clock. There is no storefront to visit; we bring tools and parts to your door, diagnose the problem on site, and tell you plainly whether a repair makes sense or whether a part has reached the end of its life.

Repair covers a wide range: deadbolts that will not throw all the way, knob and lever sets that have gone slack, latches that miss the strike plate, keys that stick or turn hard, and locks damaged during an attempted break-in. We also look at the door itself, because a lock is only as good as the way it meets the frame.

How it works in Studio City

  1. 1

    Call and describe the symptoms

    Phone (323) 997-8867 and tell us what the lock is doing: sticking, spinning, not latching, or not accepting the key. We ask about the door type, the lock brand if you know it, and whether anything changed recently, such as weather, a slammed door, or a break-in attempt.

  2. 2

    We come to you

    Because we are fully mobile and work 24/7, a technician drives to your Studio City address with common parts and tools for residential and light commercial hardware. Nothing requires a trip to a shop, because we do not operate one.

  3. 3

    Diagnose the lock and the door

    We test the key, the cylinder, the bolt, and the latch, then check how the door sits in its frame. Many jams come from strike plate misalignment or a door that has swelled or settled, not from the lock itself. Finding the true cause avoids fixing the wrong thing.

  4. 4

    Explain the options before work begins

    We tell you what is wrong and lay out the realistic choices: adjust, repair, rebuild with new internal parts, or replace. If a repair would only buy you a few months, we say so. You decide before we proceed.

  5. 5

    Repair, adjust and test

    We realign strike plates, tighten or replace worn components, lubricate appropriately, re-pin cylinders when needed, and repair damage from forced-entry attempts. Then we cycle the lock repeatedly with the door open and closed to confirm it works smoothly.

  6. 6

    Final check and follow-up advice

    We hand over working keys, show you what we changed, and suggest simple upkeep such as which lubricants to avoid. If other doors show the same wear, we mention it so you can plan rather than get surprised later.

Need lock repair in Studio City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

What affects the price

  • The type of lock involved: a basic knob set, a standard deadbolt, a multipoint lock, or an electronic smart deadbolt each call for different parts and different amounts of labor.
  • Whether the fix is an adjustment or requires replacement parts, such as a new cylinder, latch assembly, strike plate, or internal components.
  • The condition of the door and frame, since warped, swollen, or shifted doors can require alignment work in addition to the lock repair itself.
  • Damage from a forced-entry attempt, which can affect the lock, the strike, the door edge, and the surrounding wood or metal.
  • Time of day and urgency, because after-hours and emergency calls involve different scheduling than a planned daytime appointment.
  • Specialty hardware, including gate locks, intercom-linked systems, or older mid-century sets where parts may be harder to source.

Why Studio City chooses us

  • Fully mobile and open 24/7, so a lock failure at night or on a weekend does not have to wait for shop hours.
  • Serving Los Angeles and Ventura County since 1987, with hands-on experience across older hardware that newer shops rarely see.
  • Repair-first thinking: we fix what is worth fixing and are upfront when replacement is the better value.
  • Comfortable with both mechanical and electronic locks, including mechanical overrides on smart deadbolts when batteries or electronics fail.
  • We examine the door, frame and strike, not only the lock, so the problem actually stays fixed.
  • Owner-led operation under David Shar, with a straightforward explanation of the problem before any work starts.

Lock Repair across Studio City

Studio City's housing varies block by block, and so do its lock problems. In the flats north of Ventura Boulevard, including Colfax Meadows in ZIP code 91604, many 1940s and 1950s ranch and traditional homes still carry original or mid-century hardware. Decades of use leave worn latches, loose knobs, and cylinders that stick in cold mornings or after a house has settled. These are often good candidates for repair, and we can frequently restore the lock rather than replace it, which also preserves the look of the original door.

South of the boulevard, the Silver Triangle and the hillsides toward Fryman Canyon and Laurel Canyon bring a different mix: mid-century modern homes and newer gated contemporary estates with smart locks, driveway gates, and intercoms. A hillside homeowner off Laurel Canyon might call after a smart deadbolt's battery dies or its electronics fail, leaving the door stuck; we work the mechanical override, then service the lock and batteries. Near Fryman Canyon and Wilacre Park, an estate may need its driveway gate lock and front multipoint lock inspected and repaired after an attempted break-in, including checking the door edge and strike for hidden damage.

Along Ventura Boulevard and around Tujunga Village, aluminum-storefront doors take constant punishment from daily traffic, and a sticking or misaligned latch becomes a security issue at closing time. Condos and apartment complexes from the 1960s through the 1980s, found across ZIP codes 91602, 91604, 91607, and 91614, have their own pattern of worn entry deadbolts and misaligned doors. Whether you are near Radford Studio Center, close to the Studio City Farmers Market, or just off Coldwater Canyon Avenue or Colfax Avenue, call (323) 997-8867 and we will come to you.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Other Studio City locksmith services

See all of our Studio City services, or our citywide lock repair page.

Lock Repair in Studio City — FAQs

Can you repair a lock instead of replacing it?
Often, yes. Sticking, loose, and misaligned locks frequently need adjustment, new internal parts, or a re-pinned cylinder rather than a full replacement. We will tell you honestly which makes sense. Call (323) 997-8867 to describe what your lock is doing.
Why does my deadbolt not extend all the way?
The most common cause is a door that has shifted so the bolt no longer lines up with the strike plate. Weather, settling, and heavy use can all contribute. Less often, the bolt mechanism itself is worn. We check both the lock and the door alignment.
My smart deadbolt stopped working. Can you help?
Yes. We can use the mechanical override to get the door open, then service the lock and address batteries or failed components. This is common in Studio City hillside homes with electronic locks. Call (323) 997-8867 any time.
Do you repair locks after an attempted break-in?
Yes. We inspect the lock, door edge, strike plate, and frame for damage, then repair or replace what was compromised. We can also service driveway gate locks and multipoint systems on larger properties and recommend reinforcement where it helps.
Can you fix a key that sticks or turns hard?
Usually. Worn keys, debris, or a damaged cylinder are common causes. We test with a fresh key, clean or re-pin the cylinder if appropriate, and replace parts only when needed. Avoid heavy oil sprays, which can attract grime over time.
Do you service older mid-century hardware?
We do. Many Studio City homes from the 1940s through the 1960s have original locks and latches. We repair them where possible to preserve the look of the door, and we are upfront if a part cannot reasonably be restored.
Are you available at night and on weekends?
Yes. We are a 24/7 mobile locksmith, so you can call (323) 997-8867 at any hour. We come to your location; we do not have a storefront.
Can you handle lock repair for a Ventura Boulevard business?
Yes. We work on aluminum-storefront doors, latches, and commercial-style hardware that get heavy daily use. A realtor can also have us rekey a listing or install a lockbox between showings.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7