Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Palmdale · 24/7 mobile

Panic Bar Installation in Palmdale, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware across Palmdale, California. We are fully mobile and available 24/7, so we come to your door. Call (323) 997-8867 to talk through your doors and get a quote for the work.

  • Mobile to your Palmdale location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of hardware on a commercial door that has to work every single time, with no key, no knob-turning and no thinking, when people need to leave quickly. In Palmdale, that matters for warehouses and shops along the Plant 42 corridor, retail spaces near the Antelope Valley Mall, churches, schools, gyms, and the many small businesses along Palmdale Blvd and Sierra Highway. Installing the right device on the right door is a safety and code question as much as a lock question.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and David Shar and our team handle panic bar and exit device work as a fully mobile service. There is no storefront to visit. We bring the hardware knowledge and tools to your building, look at the actual door, and tell you what fits it.

Palmdale doors have their own challenges. Aluminum storefront doors with narrow stiles, steel doors in industrial units, and wood or hollow metal doors in older buildings all take different exit hardware. Desert sun and wind-blown dust are hard on latches, strikes and door closers, so we pay attention to how a door actually swings, latches and holds up over time, not just whether the device bolts on.

How it works in Palmdale

  1. 1

    Talk through the door and the use

    Call (323) 997-8867 and tell us what the door is: storefront, steel, wood, single or double, and what the building is used for. We ask whether you need a new installation, a replacement of a worn device, or a repair, and whether the door needs to be secured from outside.

  2. 2

    On-site assessment

    We come to you and look at the door material, thickness, stile width, frame condition, swing direction and existing hardware. Narrow aluminum stiles, for example, often need a specific narrow-stile device, while a hollow metal door may accept a different type altogether.

  3. 3

    Choosing the device

    We explain the options in plain terms: rim, surface vertical rod, or mortise-style exit devices, along with outside trim, key cylinders, alarms and dogging features. We match the device to the door and how the business operates, and you decide what to proceed with.

  4. 4

    Installation and alignment

    We mount the device, set the strike and make sure the latch retracts smoothly under normal push pressure. On double doors we check that both leaves close and latch together. We also check the closer so the door returns reliably.

  5. 5

    Testing and walkthrough

    We test the door from inside and outside, confirm the bar releases without a key, and show you or your staff how any trim, dogging or key function works. If the door has been compromised, we point out frame or strike problems that should be dealt with.

  6. 6

    Ongoing repair and rekeying

    If a bar sticks, a latch drags or a cylinder needs to be rekeyed or added to a master-key system, we can handle that later, too. Regular checks keep a device dependable, especially in dusty, sun-baked conditions.

Need panic bar installation in Palmdale?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • Door type and material: aluminum storefront, hollow metal, or wood doors need different mounting methods and sometimes extra reinforcement.
  • Device style: rim, vertical rod and mortise exit devices differ in complexity and in the hardware involved.
  • Single versus double doors, including whether a center mullion is present or removable.
  • Whether you are installing new, replacing an existing bar, or repairing one, and how much old hardware must be removed or patched.
  • Outside trim and cylinder needs, such as lever trim, key control or matching an existing master-key system.
  • Condition of the frame, strike and door closer, and any extra adjustments needed for the door to latch properly.

Why Palmdale chooses us

  • Fully mobile: we work at your building, so the device is fitted to the actual door instead of guessed from a description.
  • In business since 1987, with long experience across commercial doors in the Los Angeles area.
  • Available 24/7, which helps when a door cannot be secured or an exit device has failed.
  • We care about code-minded function: the bar should release freely, and we tell you when a door setup looks problematic.
  • We handle the whole door, including closers, strikes, cylinders and rekeying, instead of just bolting on a bar.
  • Plain explanations and no pressure; you see the options and what each involves before we start.

Panic Bar Installation across Palmdale

Palmdale is a spread-out city, and its commercial buildings range widely. Around Plant 42 and the airport, you find industrial and aerospace-related units with steel doors and restricted-key needs. Near the Antelope Valley Mall and along Palmdale Blvd, aluminum storefront doors dominate, and these usually call for narrow-stile exit devices. In 93550 near downtown, older buildings may have worn frames that need attention along with the hardware.

We work throughout the city: Downtown Palmdale, Rancho Vista, Anaverde, City Ranch in West Palmdale, Quartz Hill and out toward Lake Los Angeles. Many of those areas have churches, small offices, daycare centers, fitness studios and retail spaces tucked into suburban neighborhoods. We also serve ZIP codes 93551, 93552 and 93591, reaching them from CA-14, Sierra Highway, Avenue S, 10th Street West or CA-138.

The high desert climate shapes the work. Heat, sun, dust and strong winds can cause latches to stick, closers to drift and electronic parts to struggle, so we look carefully at how a door behaves in real conditions. Whether you run a shop near Poncitlan Square or a facility near the airport, call (323) 997-8867.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Palmdale locksmith services

See all of our Palmdale services, or our citywide panic bar installation page.

Panic Bar Installation in Palmdale — FAQs

What is a panic bar and when do I need one in Palmdale?
A panic bar, or exit device, lets people leave by pushing a bar without using a key. Many commercial and assembly buildings require them on certain exit doors. Call (323) 997-8867 and we can talk through your building's doors, though your local building and fire officials decide what applies.
Can you install a panic bar on an aluminum storefront door?
Yes. Storefront doors usually have narrow stiles, so we use narrow-stile exit devices designed for them. We check the door and frame first to confirm what will fit.
Do you repair existing panic bars?
Yes. We repair sticking latches, loose bars, worn strikes, bad cylinders and misaligned doors, and we will tell you honestly if replacement makes more sense.
Are you available after hours or on weekends?
We are available 24/7 and fully mobile. If an exit door will not latch or release properly, call (323) 997-8867 and we will discuss how to help.
Can the outside of the door still be locked?
Typically yes. Exit devices can be paired with outside trim or a key cylinder so the door stays secure from outside while still releasing freely from inside. We help you pick the right setup.
Can you tie a panic bar into my master-key system?
In many cases we can fit a compatible cylinder or rekey to match your existing system. It depends on the device and cylinder type, so we check on-site.
How is the price determined?
Price depends on factors such as door material, single or double doors, device style, trim and cylinder needs, and the state of the frame and closer. We give you a quote once we know the specifics.
Do you have a shop I can visit?
No. We are mobile only, so we come to your location anywhere in Palmdale. Call (323) 997-8867 to get started.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7