Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Palmdale · 24/7 mobile

Access Control Installation in Palmdale, California

Crenshaw Lock Company installs keypad, card and fob access-control systems for business entrances in Palmdale, California. We are a fully mobile locksmith available 24/7, and we come to your door. Call (323) 997-8867 to talk through your entrance, your staff and the system that fits.

  • Mobile to your Palmdale location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

A key that has been copied a dozen times is a poor way to control who walks into a business. Access control replaces that guesswork with a keypad code, a proximity card or a key fob that you can issue, change and cancel without re-cutting a single key. For a Palmdale shop, office, warehouse or service yard, it means you decide who has access and can take it away the same day someone leaves.

Palmdale businesses have their own conditions to plan around. Many storefronts have aluminum-framed glass doors, which limit what hardware will mount cleanly. Industrial and commercial buildings near the Plant 42 corridor often need restricted-key or master-key thinking alongside electronic access. And the Antelope Valley sun is hard on exterior electronics, so a keypad that looks fine on a spec sheet may not hold up on a west-facing door in July.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar built the business on showing up and doing the work properly. We are mobile only, with no storefront to visit. We assess your door where it stands, recommend what makes sense, and install it on site.

How it works in Palmdale

  1. 1

    Talk through the entrance and who uses it

    Call (323) 997-8867 and tell us about the door: storefront, steel back door, gate or interior suite. We ask how many people need access, whether schedules matter, and whether you already have keys or a master-key system we need to work around.

  2. 2

    On-site door and power assessment

    We come to your location and look at the door material, frame, existing hardware, and where power or low-voltage wiring can realistically run. Aluminum storefront stiles, for example, are narrow and call for specific hardware. We also look at sun exposure for exterior keypads.

  3. 3

    Choose keypad, card, fob or a combination

    Keypads are simple and need no credentials to carry, but codes can be shared. Cards and fobs give you individual credentials you can cancel one at a time. We explain the tradeoffs plainly and match the system to how your staff actually works, not to the most complicated option.

  4. 4

    Installation and hardware fitting

    We mount the reader or keypad, fit the electric strike, magnetic lock or electrified lockset as appropriate, and connect the controller. We make sure the door still allows safe exit, because egress matters as much as keeping people out.

  5. 5

    Programming and credential setup

    We program codes, cards or fobs, set any schedules you want, and test every credential at the door. You see how to add and remove users yourself so you are not calling us for every staffing change.

  6. 6

    Walkthrough and follow-up

    Before we leave, we walk you through daily use, what to do if a power outage occurs, and how to handle a lost fob. If something needs adjusting after a few days of real use, call us and we will address it.

Need access control in Palmdale?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • Number of doors being controlled, since each entrance needs its own reader or keypad and lock hardware
  • Door and frame type, such as aluminum storefront, hollow metal, wood or glass, which affects the hardware and labor involved
  • Credential type chosen: keypad only, cards, fobs, or a mix, and how many credentials you need issued
  • Wiring and power requirements, including whether low-voltage cable must be run a long distance or through finished walls
  • Lock style used, such as electric strike, magnetic lock or electrified lockset, and whether your existing hardware can be reused
  • Extra features like scheduling, multiple user levels, or integration with an existing master-key setup

Why Palmdale chooses us

  • Fully mobile and 24/7: we come to your business, with no storefront, so the assessment happens at the actual door
  • In business since 1987, with the owner, David Shar, leading the work rather than handing it off blindly
  • We account for Antelope Valley heat when recommending exterior keypads and readers, rather than defaulting to indoor-rated gear
  • We understand master-key and restricted-key systems, so electronic access can sit alongside the keys you already have
  • We install with safe egress in mind, not just security, and we explain the reasoning
  • We teach you to manage users yourself, so you are not dependent on us for routine changes

Access Control across Palmdale

Palmdale covers a lot of ground, and its businesses are just as varied. Along Palmdale Blvd and around Downtown Palmdale, you find small offices, retail units and older buildings where doors and frames were not designed with electronic hardware in mind. Near the Antelope Valley Mall and along Avenue S and 10th Street West, storefronts often rely on aluminum-framed glass doors where a keypad or strike must be chosen carefully to suit the narrow frame. If your business is in the 93550 ZIP code, that is the type of door we are used to assessing.

Out toward Air Force Plant 42 and Palmdale Regional Airport, commercial and industrial buildings tend to have different needs: rear service doors, shared yards, and a staff that may change with contracts. Card or fob access fits well there, because one lost credential can be canceled without rekeying the whole building. In 93551 and 93552, which take in areas like Rancho Vista, Anaverde and City Ranch, newer offices and service businesses often want clean, modern entry control for a few doors rather than a large system.

We also serve businesses off Sierra Highway, near CA-14 and CA-138, and out toward Quartz Hill and Lake Los Angeles in 93591, where larger parcels sometimes mean gates, outbuildings and long wiring runs. Summer heat is a real factor everywhere in the valley, so we pay attention to sun exposure and where a reader is mounted. Call (323) 997-8867 and we will come to you.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Palmdale locksmith services

See all of our Palmdale services, or our citywide access control page.

Access Control in Palmdale — FAQs

What is the difference between keypad, card and fob access control?
A keypad uses a code the person memorizes, a card is held near a reader, and a fob works similarly but attaches to a key ring. Keypads need nothing to carry but codes can be shared. Cards and fobs let you cancel one person's access individually. Call (323) 997-8867 and we can help you decide.
Can access control be installed on an aluminum storefront door?
Usually yes, but the narrow frames common on Palmdale storefronts limit which locks and strikes fit. We check the door in person and choose hardware that mounts properly, sometimes using a surface-mounted or storefront-specific option.
Will the Antelope Valley heat damage an exterior keypad?
Direct sun and high temperatures can shorten the life of electronics not built for it. We consider exposure when picking and placing hardware, and may suggest a shaded mounting location or a reader rated for outdoor use.
Can you add access control to a building that already has a master-key system?
Often, yes. Electronic access can cover certain doors while mechanical keys continue to work on others. We look at how your keys are currently organized before recommending anything.
What happens if an employee leaves or loses a fob?
You remove that credential from the system and it stops working, with no rekeying needed. We show you how to do this yourself during setup. If you need help, call (323) 997-8867.
What happens during a power outage?
That depends on the lock type and setup. We explain how your door behaves without power, and we make sure there is a safe way to exit and a plan for entry. Backup options can be discussed during the assessment.
Do you have a shop I can visit in Palmdale?
No. Crenshaw Lock Company is fully mobile with no storefront. We come to your business, assess the door, and install on site, any time of day or night.
Can you install access control on more than one door?
Yes. Many businesses start with a main entrance and add a rear or interior door later. We can plan the system so it grows with you.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7