Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Reseda · 24/7 mobile

Panic Bar Installation in Reseda, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware throughout Reseda, California. We are fully mobile and available 24/7, coming to your business wherever it is. For an install, a stuck bar or a failed exit door, call (323) 997-8867.

  • Mobile to your Reseda location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is a simple piece of hardware with a serious job: when someone pushes on it, the door has to open, every time, with no key, no knob and no second thought. In Reseda, that matters for a wide mix of buildings. There are retail storefronts along Sherman Way and Reseda Blvd, small offices and light-industrial spaces, church halls, daycare rooms, and rear exits on restaurants and shops that open onto alleys and parking lots.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and David Shar and our technicians handle exit hardware as a regular part of commercial work. We install new panic bars on doors that never had them, replace worn or damaged exit devices, and repair bars that stick, rattle, fail to latch or no longer retract smoothly. We are a mobile service with no storefront, so all work happens on site at your door.

Many Reseda commercial buildings are older, and the doors show it. Frames that have settled over the decades, especially after the 1994 Northridge earthquake that was centered here, can leave a latch dragging or a strike out of line. A panic bar only helps if the door it is mounted on closes and releases properly, so we look at the whole opening, not just the device.

How it works in Reseda

  1. 1

    Tell us about the door

    Call (323) 997-8867 and describe the door: single or double, wood, hollow metal or aluminum storefront, what it is used for, and whether a bar is already there. Photos help, but they are not required.

  2. 2

    On-site assessment

    We come to your location and inspect the door, frame, hinges and closer. We check whether the door hangs square, whether the latch reaches the strike cleanly, and what kind of exit device suits the door and its use.

  3. 3

    Choosing the right device

    Panic bars come in several styles, including rim-mounted, surface or concealed vertical rod, and mortise-type, with options for outside trim or key control. We explain the choices plainly and match the hardware to how the door actually works for your building.

  4. 4

    Installation or repair

    We mount the device, align the latch and strike, and adjust or replace parts such as the closer where needed. For repairs, we correct the cause, whether a bent rod, a worn latch or a misaligned frame, rather than just freeing the bar for a week.

  5. 5

    Testing and walkthrough

    We test the door repeatedly from the inside and, where there is outside trim, from the outside. You see how it operates, how to maintain it, and what to watch for so small issues do not become failures.

Need panic bar installation in Reseda?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim-mounted bar costs differently from a concealed vertical rod or a mortise-style exit device.
  • Door material and condition, since steel, wood and aluminum storefront doors each need different mounting methods and prep.
  • Single versus double doors, and whether a removable mullion or additional hardware is involved.
  • Whether the job is a new install, a replacement, or a repair of an existing bar.
  • Related work such as frame realignment, a new closer, or outside trim and keying.
  • Timing, including after-hours or emergency calls, and the travel required to reach your location.

Why Reseda chooses us

  • Fully mobile and available 24/7, so a failed exit door or a security gap does not have to wait for business hours.
  • Serving the Los Angeles and Ventura County area since 1987, with the owner, David Shar, leading the work.
  • We assess the door and frame together, which matters on older Valley buildings where settling can throw off latch alignment.
  • Plain explanations of your hardware options without pushing a more expensive device than the door needs.
  • We handle both the exit device and the lock side of the door, so security and egress are addressed together.
  • No storefront and no pretense: we come to you, do the work on site, and test it before we leave.

Panic Bar Installation across Reseda

Reseda is a flat, busy part of the central San Fernando Valley, and its commercial life runs along a few main roads: Reseda Blvd, Sherman Way, Vanowen St, Victory Blvd and Saticoy St. Small shops, offices and service businesses in the Reseda Blvd commercial district and along the Sherman Way corridor often have rear doors and side exits that need dependable emergency hardware. Near the Reseda Theatre and its historic marquee on Sherman Way, older storefronts sit beside newer tenants, and each has its own door types and quirks.

The area has a long building history. Much of the housing and many commercial structures date from the post-war decades, and the 1994 Northridge earthquake, whose epicenter was in Reseda, left its mark on frames and doorways. A door that has shifted even slightly can make a panic bar latch poorly or release roughly. When we install or service exit devices in ZIP codes 91335 and 91337, we check the frame, the hinges and the strike as carefully as the bar itself.

Whether you manage a retail unit off Reseda Blvd, a facility near Reseda Park and the Reseda Recreation Center, or a business closer to Tampa Ave, Wilbur Ave or the Sepulveda Basin edge, we come to you. Call (323) 997-8867 any hour and we will talk through the door and the next step.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Reseda locksmith services

See all of our Reseda services, or our citywide panic bar installation page.

Panic Bar Installation in Reseda — FAQs

What is a panic bar, and does my Reseda business need one?
A panic bar, also called an exit device, lets people open a door by pushing a horizontal bar rather than turning a knob or using a key. Requirements depend on occupancy type and use, so check with your local building and fire authorities. We can install the hardware once you know what your door needs. Call (323) 997-8867 to discuss it.
Can you install a panic bar on a door that never had one?
Usually yes. We check the door material, thickness and frame, then choose a device that mounts properly. Some doors need extra prep or reinforcement, and we tell you that before work begins.
My panic bar sticks or won't latch. Can it be repaired?
Often it can. Common causes are a misaligned strike, a worn latch, a bent rod or a failing closer. In older Reseda buildings, settled frames are a frequent culprit. We find the cause and fix it, or replace the device if repair isn't sensible.
Do you handle emergency calls at night or on weekends?
Yes. We are available 24/7 and fully mobile. If an exit door won't secure or won't open properly, call (323) 997-8867 and we will help you get it sorted.
Can a panic bar also be locked from the outside?
Many exit devices are available with outside trim, such as a lever or a key cylinder, so the door can be entered from outside while still allowing free exit from inside. We help you choose the right configuration for how you use the door.
Do you work on double doors and aluminum storefront doors?
Yes. Double doors may use vertical rod devices or a removable mullion, and aluminum storefront doors need devices suited to narrow stiles. We match the hardware to the door.
Do you have a shop I can visit in Reseda?
No. Crenshaw Lock Company is fully mobile with no storefront. We come to your business, assess the door and do the work on site.
Can you rekey or upgrade the other locks on the same door?
Yes. We can rekey or replace deadbolts and other hardware during the same visit, which is useful after an attempted break-in or a change of tenants. Call (323) 997-8867 to arrange it.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7