Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Reseda · 24/7 mobile

Commercial Door Hardware Repair and Replacement in Reseda, CA

Crenshaw Lock Company repairs and replaces commercial door hardware in Reseda, California, including storefront, aluminum-frame and mortise hardware. We are fully mobile and available 24/7, so we come to your business wherever it sits. Call (323) 997-8867 to describe the door and get started.

  • Mobile to your Reseda location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door works harder than almost anything else in a building. It opens and closes hundreds of times a day, gets leaned on, kicked, propped, and slammed, and it still has to latch cleanly at night. In Reseda, that means the doors along Reseda Blvd, Sherman Way, Vanowen St, and Victory Blvd: aluminum-frame storefronts, glass doors with narrow stiles, and older wood or hollow-metal doors with mortise locks that have been in service for decades.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar built the business on the practical side of this work: figuring out why a door will not latch, why a key turns stiffly, or why a closer slams. Many problems are not the lock itself. They are the strike, the pivot, the closer, the exit device, or a frame that has shifted. We diagnose the whole door, not just the part that is complaining.

We are mobile only. There is no storefront to visit; we bring tools, common parts, and hardware knowledge to your location, whether you run a small shop, a restaurant, an office suite, or manage commercial space on the ground floor of an apartment building. If a door will not secure, call (323) 997-8867 any hour.

How it works in Reseda

  1. 1

    Describe the door and the problem

    When you call, tell us what kind of door it is: aluminum storefront, glass, hollow metal, or wood. Also tell us what it is doing, such as not latching, sticking, a loose handle, a key that binds, or a closer that slams. That helps us bring suitable parts.

  2. 2

    On-site inspection of the full assembly

    We look at the lock or exit device, the latch and strike, hinges or pivots, the closer, weatherstripping, and the frame alignment. A door that will not latch is often a symptom of sag or settling, so we check the door in its frame before swapping hardware.

  3. 3

    Repair or replace, explained plainly

    We tell you what can be repaired, such as adjusting a strike, tightening a mounting, or servicing a closer, and what is better replaced. Mortise cylinders, storefront deadbolts, thumbturns, push-pull sets, and panic hardware each have their own considerations. You decide before we begin.

  4. 4

    Installation and fitting

    We install the hardware and fit it to the actual door, not an ideal one. On aluminum frames that means working within narrow stile dimensions and the existing prep. On mortise doors, it means checking the pocket and the faceplate so the new lock sits properly.

  5. 5

    Rekey and key control

    If keys have been lost, an employee has left, or a break-in was attempted, we can rekey cylinders so old keys stop working. We can also discuss restricted keyways and how to keep track of who holds keys.

  6. 6

    Final testing

    We cycle the door repeatedly, check latch engagement, closer speed, and that the lock operates smoothly from both sides as intended. Before we leave, we walk you through how it should feel so you can tell if something changes.

Need commercial door hardware in Reseda?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door and frame: aluminum storefront, glass, hollow metal, and wood each call for different hardware and installation methods.
  • Whether the work is a repair or a full replacement, and how many doors are involved in one visit.
  • The grade and style of hardware chosen, such as a standard storefront deadbolt versus a mortise lock, panic device, or high-security cylinder.
  • The condition of the door and frame, including sag, settling, or damage from forced entry that needs correcting along with the lock.
  • Whether rekeying, restricted keyways, or master key arrangements are part of the job.
  • The time of day and urgency, since after-hours and emergency calls differ from scheduled work.

Why Reseda chooses us

  • Fully mobile service: we come to your Reseda business, so there is no need to leave a door unsecured while you look for parts.
  • In business since 1987, with hands-on experience across older mortise hardware and modern storefront systems.
  • We diagnose the whole door, including frame, closer, and strike alignment, rather than just replacing the part that failed.
  • Available 24/7, which matters when a door will not lock after a break-in attempt or a failed latch at closing time.
  • Straightforward recommendations: we say when a repair is enough and when replacement is the more sensible choice.
  • We can rekey as part of the visit, so a hardware fix and a key control reset can often happen together.

Commercial Door Hardware across Reseda

Reseda's commercial life runs along a few long, flat boulevards. The Reseda Blvd commercial district and the Sherman Way corridor are lined with small retail shops, restaurants, salons, offices, and service businesses, many in older low-rise buildings with aluminum storefront doors that have seen years of daily use. Near the historic Reseda Theatre marquee on Sherman Way, and out toward Vanowen St, Victory Blvd, Saticoy St, and Roscoe Blvd, you will find a mix of original mid-century construction and later storefront remodels.

That building stock shapes the hardware problems we see. Reseda was at the center of the 1994 Northridge earthquake, and older frames across the area have settled over time. A door that once latched perfectly can start to rub, drag on the threshold, or miss the strike, which wears out locks and closers early. Many ground-floor spaces below mid-century apartment buildings also share doors, tenants, and keys, so rekeying and key control come up often. A small shop on Sherman Way that has had an attempted forced entry may need a damaged latch area reinforced, a stronger deadbolt, and a rekey in the same visit.

We serve businesses throughout ZIP codes 91335 and 91337, from the Reseda Park residential area and the blocks near Reseda Park and the Reseda Recreation Center to commercial stretches near Tampa Ave and Wilbur Ave, and down toward the Sepulveda Basin and LA River edge. US-101 and Sepulveda Blvd are close by, so we can reach most of the neighborhood readily. Call (323) 997-8867 any time.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Reseda locksmith services

See all of our Reseda services, or our citywide commercial door hardware page.

Commercial Door Hardware in Reseda — FAQs

What kinds of commercial doors do you work on in Reseda?
We work on aluminum-frame storefront doors, glass doors, hollow metal doors, and wood doors with mortise or cylindrical hardware. Call (323) 997-8867 and describe your door so we can plan accordingly.
My storefront door will not latch. Is the lock broken?
Not always. Frame settling, a sagging door, a worn pivot, or a misaligned strike are common causes. In Reseda, many older frames have shifted over the decades. We check the whole assembly before replacing anything.
Can you fix hardware after an attempted break-in?
Yes. We assess damage to the lock, latch, strike, and frame, then repair or replace what is needed and can rekey the cylinders. If your door will not secure, call (323) 997-8867 any hour.
Do you service mortise locks?
Yes. Mortise locks are common in older commercial buildings. We can service them, replace cylinders, or replace the lock body, and we check the pocket and faceplate so the new hardware fits properly.
Can you rekey my business after an employee leaves?
Yes. Rekeying makes old keys stop working without replacing all your hardware in many cases. We can also talk with you about restricted keyways to help control duplication.
Do you repair door closers and exit devices?
We handle closers, panic and exit hardware, push-pull sets, and related parts as part of commercial door hardware work. A slamming or sluggish closer can damage both the door and the frame.
Are you available outside business hours?
Yes, we are available 24/7 and fully mobile. If a door will not lock overnight, call (323) 997-8867 and we will work out the next step.
How is the price determined?
It depends on the door and frame type, repair versus replacement, hardware grade, frame condition, rekeying needs, and urgency. We explain options before work begins so you know what to expect.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7