Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Culver City · 24/7 mobile

Panic Bar Installation in Culver City, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware throughout Culver City, California. We are fully mobile and available 24/7, coming to your building wherever it sits. For commercial exit hardware, call (323) 997-8867 and talk with a real locksmith.

  • Mobile to your Culver City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of hardware on a building that has to work every single time, in the worst possible moment. Whether you run a restaurant near Downtown Culver City, a production office in the Hayden Tract, a retail suite along Washington Boulevard or Sepulveda Boulevard, or manage a multi-unit building in Fox Hills, the exit door has two jobs: let people out instantly without a key, and keep the wrong people from walking in.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, under owner and lead technician David Shar. We are a fully mobile operation, so there is no storefront to visit. We come to your door, look at what you actually have, and install or repair the exit device on site. That matters in Culver City, where the building stock ranges from aluminum-storefront retail to studio-adjacent offices, newer mixed-use lofts and older buildings with doors that were never meant for modern hardware.

We handle new panic bar installation, replacement of worn or damaged exit devices, repair of bars that stick, rattle or fail to latch, and trim and cylinder work on the outside of the door. If you are not sure whether your current hardware is right for the door, we can talk through the options with you. Our job is to make the exit reliable and the door secure, and to be straightforward about what the door needs.

How it works in Culver City

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us what kind of door it is (aluminum storefront, hollow metal, wood), whether it is a single or double door, and what is wrong or what you want installed. This helps us bring the right hardware.

  2. 2

    On-site assessment

    We come to your location and inspect the door, frame, existing hardware and how the door is used. We check door thickness, stile width on storefronts, swing direction, and whether the door is part of an exit path, so the device we recommend suits the opening.

  3. 3

    Choose the device and trim

    We explain the options, such as rim devices, vertical rod devices for double doors, and mortise-style devices, along with exterior trim choices like a lever, pull or keyed cylinder. If you want keying that fits an existing master-key system, we plan for that now.

  4. 4

    Installation and alignment

    We mount the device, fit the strike, and make sure the door closes and latches cleanly on its own. Panic bars often fail because of a door that sags or a closer that is off, so we check and adjust those parts as part of the work.

  5. 5

    Function testing

    We test the push action from the inside repeatedly, confirm the latch retracts smoothly, and verify the outside trim and key operation. We walk you through how the device works and what to watch for during regular maintenance.

  6. 6

    Follow-up guidance

    We leave you with practical notes about care, such as checking for loose screws and keeping the strike clear. Since local fire and building requirements vary by occupancy, we encourage you to confirm specifics with your property manager or the appropriate inspector.

Need panic bar installation in Culver City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim exit device differs from a vertical rod or concealed rod unit, and a mortise device is a different job again.
  • Door type and condition: aluminum storefront, hollow metal and wood doors each need different mounting, and a door that is warped or sagging may need adjustment first.
  • Single versus double doors, since a pair of doors usually needs more hardware and more alignment work.
  • Exterior trim and keying, including whether you want a keyed cylinder, a lever, or high-security cylinders that match an existing system.
  • Whether the job is a new installation or a repair of existing hardware, and whether old devices must be removed or the door prepped.
  • Add-ons such as door closers, alarms or electrified hardware tied into access control, and the time of day the work is needed.

Why Culver City chooses us

  • Fully mobile, 24/7 service, so a failed exit door on a late night or weekend does not have to wait until morning.
  • In business since 1987, with owner David Shar leading the work and a long history with commercial doors across Greater Los Angeles.
  • We look at the whole opening, including the closer, frame and strike, because a good panic bar on a poorly hung door will still fail.
  • Familiarity with the commercial mix in Culver City, from aluminum storefronts to studio and office buildings that use high-security cylinders or electronic access.
  • Honest recommendations: if a repair is enough, we will say so rather than push a full replacement.
  • No storefront overhead or showroom visit. The work happens at your door, and we explain what we are doing as we go.

Panic Bar Installation across Culver City

Culver City packs a lot of different door types into a small area. Around Downtown Culver City and the Helms Bakery District, restaurants, shops and creative offices often use aluminum storefront doors with narrow stiles, which need exit devices designed for that profile. Near the Kirk Douglas Theatre, the Culver Hotel and The Culver Steps, foot traffic and busy event nights put exit hardware through constant use, so bars wear out and latches loosen over time.

West of the center, the Hayden Tract and the areas near Sony Pictures Studios and Culver Studios are full of production offices, studios and tech-tenant buildings where exit doors may be tied to access control or use high-security cylinders. Along Washington Boulevard, Culver Boulevard and Jefferson Boulevard, businesses in ZIP code 90232 regularly need hardware replaced after tenant changes or a failed inspection. In Fox Hills, ZIP code 90230, large 1970s and 80s condo and apartment buildings have stairwell and common-area exit doors that property managers need kept in working order, and the Westfield Culver City area has its own mix of retail back-of-house exits.

Whatever the building, we come to you. From Carlson Park and Sunkist Park to Blair Hills and Culver Crest, and wherever I-405 or the Ballona Creek corridor puts you in the area, call (323) 997-8867 and we will talk through the door before we arrive.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Culver City locksmith services

See all of our Culver City services, or our citywide panic bar installation page.

Panic Bar Installation in Culver City — FAQs

What is the difference between a panic bar and an exit device?
The terms are often used interchangeably. A panic bar is the push bar on the inside of the door, while exit device usually refers to the whole assembly, including the latch, strike and outside trim. We install and repair the full assembly. Call (323) 997-8867 if you are unsure what your door needs.
Can you install a panic bar on an aluminum storefront door?
Yes. Storefront doors in Downtown Culver City and along Washington Boulevard often have narrow stiles, so we use devices made for that profile. We check the door and frame first to confirm the right fit.
My panic bar sticks or does not latch. Can it be repaired?
Often, yes. Sticking and failed latching are commonly caused by a misaligned strike, a sagging door or a closer that needs adjusting. We inspect the whole opening and repair what is needed, and replace the device only if it is worn out.
Do you offer emergency service for a broken exit door?
We are available 24/7 and fully mobile, so you can call (323) 997-8867 at any hour about an exit door that will not work or a business that cannot be secured.
Can the outside of the door still be locked with a key?
Yes. Panic bars are designed so people can always exit without a key, while the outside can use a keyed cylinder, lever trim or be fixed so it cannot be opened from outside. We help you choose based on how the door is used.
Can you match panic bar keying to my existing master-key system?
In many cases we can plan the cylinders to fit an existing system, including some high-security cylinders used by office and tech tenants in the Hayden Tract. Tell us what system you have when you call.
Do you work with property managers in Fox Hills?
Yes. We work with property managers on stairwell, common-area and commercial exit doors in buildings like the larger Fox Hills complexes. We can coordinate access and explain the work clearly so it is easy to document.
Will my exit hardware meet code?
Requirements depend on the building's occupancy, door use and local fire and building rules. We install devices correctly and make sure they function properly, but we recommend confirming code questions with your property manager or the appropriate inspector. You can also call (323) 997-8867 to talk it through.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7