Open 24/7 · Greater Los Angeles & Ventura County

Crenshaw Lock

Panic Bar Installation in Azusa · 24/7 mobile

Panic Bar Installation in Azusa, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware in Azusa, California. We are fully mobile and available 24/7, so we come to your door. Call (323) 997-8867 to talk through your door, your building and what needs to happen.

  • Mobile to your Azusa location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7

A panic bar is one of the few pieces of hardware that has to work perfectly on the worst day your building ever has. Someone pushes against it in a hurry, maybe in the dark, maybe in a crowd, and the door has to give. In Azusa that applies to a wide range of places: a retail storefront on Foothill Blvd, a classroom or lab building near Azusa Pacific University, a warehouse off Gladstone St, a church hall, or a restaurant back door off an alley behind Azusa Ave.

Our work covers new installations, replacing worn or damaged exit devices, and repairing bars that stick, rattle, fail to latch or no longer retract smoothly. We also handle the related details that tend to cause trouble: strikes that have drifted out of alignment, doors that have sagged, outside trim that no longer matches the inside hardware, and closers that slam or fail to pull the door shut. Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner David Shar and his team have seen nearly every way an exit door can go wrong.

We are mobile only. There is no storefront to visit, which means we do the assessment and the work at your door. Because we are available around the clock, a door that will not secure after a break-in attempt or will not open from inside can be dealt with on your schedule rather than waiting for business hours. We are not a code inspector or a fire marshal, so for questions about what your occupancy requires, we encourage you to confirm with the local authority having jurisdiction, and we will install hardware that fits what you tell us they require.

How it works in Azusa

  1. 1

    Talk through the door and the building

    Call (323) 997-8867 and tell us what kind of business it is, what the door is made of, and whether this is a new install, a replacement or a repair. Photos of the door, frame and any existing hardware help us arrive prepared.

  2. 2

    Inspect the door, frame and existing hardware

    On site we check the door material, thickness, swing direction, frame condition and whether the door hangs true. A bar can only work as well as the door it is mounted on, so we look at hinges, closers and strike alignment before anything is drilled.

  3. 3

    Choose the right type of exit device

    Rim devices, surface vertical rod devices, mortise-style devices and concealed options each suit different doors. We discuss single versus double doors, whether you need outside trim or a key override, and whether the opening needs to be alarmed or kept fully secure from outside.

  4. 4

    Install and align

    We mount the device, set the strike, and adjust so the bar retracts with light pressure and the latch seats cleanly. On older brick or steel frames in downtown Azusa we take extra care that the mounting is solid and the door closes fully on its own.

  5. 5

    Test and walk you through it

    We operate the door repeatedly from both sides, check the closer, and confirm the bar releases without sticking. We show you how to dog down the bar if that fits your use, how to lock or unlock the outside trim, and what to watch for in routine upkeep.

Need panic bar installation in Azusa?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

What affects the price

  • The type of device: a basic rim device costs differently than a vertical rod, mortise or concealed unit, and fire-rated models differ from standard ones.
  • Single door or pair of doors, since double doors with a removable mullion or additional latching points involve more hardware and labor.
  • Condition of the existing door and frame: sagging doors, damaged strikes or worn closers may need correction so the new device works properly.
  • Door material, such as hollow metal, aluminum storefront, wood or older brick-opening frames, which affects mounting method and prep work.
  • Extras like exterior trim, key cylinders, alarm or delayed-egress options, and matching existing keying across the building.
  • Timing of the visit, including after-hours or emergency calls versus scheduled work.

Why Azusa chooses us

  • We are fully mobile and available 24/7, so a failed exit door does not have to wait for a shop to open.
  • Serving Greater Los Angeles and Ventura County since 1987 means long experience with both old commercial doors and newer storefronts.
  • We look at the door, frame and closer as one system rather than just bolting on a bar, which prevents the sticking and rattling that come from a poorly hung door.
  • We are upfront about what we can and cannot decide: we install to your stated requirements and suggest you confirm code questions with the local authority.
  • You deal directly with a working locksmith team led by owner David Shar, not a call center, at (323) 997-8867.
  • We can match keying and trim to the rest of your building so staff are not carrying extra keys for one door.

Panic Bar Installation across Azusa

Azusa's commercial buildings are a real mix. Downtown Azusa along Azusa Ave and Foothill Blvd has brick buildings from the early twentieth century, some with original frames and mortise hardware that need careful handling when a modern exit device is added. Newer construction in the Rosedale area tends toward contemporary storefront and office doors, where the work is more often a clean install of a new device or an upgrade of trim and closers. Businesses in 91702 also range from shops and restaurants to light industrial space reached via Interstate 210 or SR-39.

Around Azusa Pacific University and Citrus College, campus-adjacent businesses, classrooms, event spaces and student-serving shops have heavy daily traffic on their doors, and exit devices there get used hard. Near the Metro A Line stations at Azusa Downtown and APU/Citrus College, foot traffic keeps storefront doors busy, so smooth and reliable operation matters. We also work with properties toward the San Gabriel Canyon gateway, where doors face dust, weather and less frequent attention.

If you manage a building anywhere in Azusa, from Alosta Ave to Gladstone St, and a panic bar is stuck, damaged, missing or never installed, call (323) 997-8867. We will come to you, look at the door in person, and talk through the options before we start.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Other Azusa locksmith services

See all of our Azusa services, or our citywide panic bar installation page.

Panic Bar Installation in Azusa — FAQs

Do you install panic bars on older brick buildings in downtown Azusa?
Yes. Older frames and doors along Azusa Ave and Foothill Blvd can need extra attention to mounting and alignment, and we assess the door and frame first. Call (323) 997-8867 and describe what you have.
Can you repair a panic bar instead of replacing it?
Often, yes. Sticking, slow retraction, loose mounting and misaligned strikes can frequently be corrected. If the device is badly worn or damaged, we will tell you honestly that replacement makes more sense.
Are you available after hours if an exit door will not open or lock?
Yes, we are available 24/7 and fully mobile. For an urgent exit door problem, call (323) 997-8867 and we will talk through the situation.
Do I need outside trim or a key on my panic bar?
That depends on how the door is used. Some exits are push-out only with no outside access, while others need a key or trim for staff entry. We help you pick based on how the door is used.
Can you tell me what my business is required to have for code?
We are not code inspectors, so we cannot make that determination for you. Check with the local fire or building authority, then tell us what is required and we will install hardware to match.
Do you work on double doors?
Yes. Pairs of doors may need vertical rod devices or a removable mullion, and we check that both leaves latch properly and close together.
Can the new panic bar be keyed to match my other locks?
In many cases, yes, where the device uses a key cylinder. We can discuss matching keying with the rest of your building when we assess the door.
Do you have a shop in Azusa I can visit?
No, we are mobile only and come to your location. To schedule or ask questions, call (323) 997-8867.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7