Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Agoura Hills · 24/7 mobile

Commercial Door Hardware Repair and Replacement in Agoura Hills, CA

Crenshaw Lock Company provides mobile commercial door hardware repair and replacement in Agoura Hills, California, covering storefront, aluminum-frame and mortise hardware. We are available 24/7 and come to your business. For a door that will not latch, lock or close properly, call (323) 997-8867.

  • Mobile to your Agoura Hills location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door works hard. A shop door along Agoura Road or Kanan Road may open and close hundreds of times a day, and the hardware takes that abuse: handles loosen, latches wear, closers lose their speed, and cylinders start to bind. When one part fails, the whole business can be left unsecured or hard to enter. Our work is repairing and replacing the hardware that keeps those doors working.

We handle the kinds of hardware common to Agoura Hills commercial buildings: aluminum-frame storefront doors with narrow stiles, mortise lock bodies in heavier doors, pull handles and push bars, panic and exit devices, door closers, strikes and rim or surface-mounted hardware. Sometimes a repair is all that is needed, such as adjusting a strike or replacing a worn cylinder. Other times replacement is more sensible, and we will explain which is which.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. We are fully mobile, with no storefront to visit. We come to your door, diagnose the problem on site and work to leave the building secure, whether you call in the middle of the day or the middle of the night.

How it works in Agoura Hills

  1. 1

    Call and describe the door

    Call (323) 997-8867 and tell us what the door is doing: not latching, key sticking, handle loose, closer slamming, or the door not securing at close. Tell us if it is aluminum storefront, wood, or a heavier mortise setup. This helps us arrive prepared.

  2. 2

    On-site inspection

    We examine the whole door assembly rather than only the part you point to. Misaligned frames, worn hinges, a tired closer or a shifted strike often cause hardware to fail, and fixing only the visible symptom would bring the problem back.

  3. 3

    Repair or replace, explained plainly

    We lay out what can be repaired, what should be replaced and why. Aluminum-frame doors have specific backset and stile limitations, so we match hardware that actually fits your door instead of forcing a part that will not last.

  4. 4

    Installation and adjustment

    We install the hardware, align latches and strikes, and set closers so the door shuts and locks smoothly without slamming. We test it repeatedly to confirm it works under normal use.

  5. 5

    Rekeying and key control

    If keys have been lost, an employee has left or you want better control, we can rekey or replace cylinders at the same visit so only the right people have access.

  6. 6

    Final check before we leave

    We confirm the door closes, locks and releases properly, and that any exit hardware works as it should. We make sure the building is secure before we go.

Need commercial door hardware in Agoura Hills?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door and frame: aluminum storefront, hollow metal, wood or glass each use different hardware.
  • Whether the hardware can be repaired or needs full replacement, such as a worn mortise body versus a simple strike adjustment.
  • The grade and style of hardware chosen, from standard to heavy-duty commercial or panic and exit devices.
  • How many doors are involved and whether cylinders must be rekeyed to a common key.
  • Whether frame, hinge or closer problems must be corrected along with the lock hardware.
  • The time of the call, since after-hours and emergency service differs from a scheduled daytime visit.

Why Agoura Hills chooses us

  • Fully mobile service: we come to your business in Agoura Hills, so there is no shop trip and no leaving a door unsecured while you wait.
  • 24/7 availability, useful when a storefront will not lock at closing time or a break-in damages the hardware overnight.
  • Experience since 1987 with commercial hardware, including narrow-stile aluminum doors and older mortise locks.
  • We look at the whole door assembly, including closers, hinges and strikes, to fix the real cause of the failure.
  • We explain repair versus replacement honestly and do not push a full replacement when a smaller fix will hold up.
  • Rekeying and hardware work can often be done in one visit, saving a second appointment.

Commercial Door Hardware across Agoura Hills

Agoura Hills has a distinctive commercial mix. Along Agoura Road and Kanan Road you find aluminum-storefront retail, offices and restaurants, many with the narrow-stile glass doors that depend on specific hardware. Shopping centers near Whizin's Market Square and businesses within reach of US-101 see heavy daily foot traffic, which wears latches, pulls and closers faster than most owners expect.

Our work spans the city's ZIP codes, including 91301 and 91376. Businesses near Cornell Road and Thousand Oaks Boulevard, offices serving residents of Morrison Ranch and Lake Lindero, and service businesses supporting Old Agoura's equestrian properties all rely on doors that lock reliably. Lake Lindero's community facilities and common areas, for example, often have entry doors and cluster-mailbox areas that need hardware maintained or rekeyed when management changes.

Because the Santa Monica Mountains area can see strong sun and summer heat, exterior doors and hardware near Ladyface Mountain and along the open stretches of Kanan Road can swell, bind or wear unevenly. If your door has started sticking or a latch no longer catches, call (323) 997-8867 and we will come to you.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Agoura Hills locksmith services

See all of our Agoura Hills services, or our citywide commercial door hardware page.

Commercial Door Hardware in Agoura Hills — FAQs

Do you repair aluminum storefront door hardware in Agoura Hills?
Yes. We repair and replace hardware on aluminum-frame storefront doors, including handles, latches, cylinders, closers and strikes. Call (323) 997-8867 to describe the door.
Can you come out after hours if my business door will not lock?
Yes. We are available 24/7 and fully mobile, so we can come to your Agoura Hills business at night, on weekends or on holidays to secure the door.
Should I repair or replace my commercial door hardware?
It depends on the wear and the door type. A loose strike or tired cylinder may only need repair, while a worn mortise body or failing exit device may be better replaced. We inspect it and explain the options.
Do you work on mortise locks?
Yes. We service and replace mortise lock bodies and related trim, and we can help match hardware when the original is older or hard to find.
Can you rekey the locks at the same time?
Usually, yes. If keys are lost or staff have changed, we can rekey or replace cylinders during the same visit. Call (323) 997-8867 to ask about your setup.
Does a door closer count as door hardware?
Yes. A closer that slams, drifts or fails to latch the door is a common cause of security problems, and we adjust or replace closers as part of the job.
Do you serve property managers and HOAs?
Yes. We can work on common-area doors, entry hardware and shared locks for properties around Agoura Hills, including community areas like those in Lake Lindero.
Is there a shop I can visit?
No. Crenshaw Lock Company is entirely mobile and comes to your location. Call (323) 997-8867 to arrange service.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7