Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Agoura Hills · 24/7 mobile

Access Control Installation in Agoura Hills, CA

Crenshaw Lock Company installs keypad, card and fob access-control systems for business entrances in Agoura Hills, California. We are a fully mobile locksmith available 24/7, so we come to your door with the equipment. Call (323) 997-8867 to talk through your building and your options.

  • Mobile to your Agoura Hills location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

A metal key is a blunt tool for a business. It can be copied without anyone knowing, it walks out the door with a departing employee, and it tells you nothing about who came in or when. Access control replaces that with keypad codes, proximity cards or key fobs that you can issue, change and cancel without rekeying a single cylinder. For Agoura Hills offices, clinics, studios, retail suites and service businesses, that control is often the difference between an entrance you trust and one you only hope is secure.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner David Shar leads our lock and access work. We install access control on business entrances: front doors, back-of-house doors, suite doors, rear lots and shared gates. Because we are fully mobile, there is no showroom to visit. We evaluate your door on site, recommend a system that suits how your staff actually moves through the building, and install it where it will be used.

Agoura Hills has a mix of buildings that each pose different questions. Aluminum-storefront retail along Agoura Road and Kanan Road, professional suites near the US-101 corridor, and low-slung commercial buildings with rear service doors all call for different hardware. This page explains how we approach the work, what drives the cost, and what to ask before you commit.

How it works in Agoura Hills

  1. 1

    Walk the entrance and talk through who needs access

    We start by looking at the door, the frame, the surrounding wall and how people use the entrance. We ask who needs access, at what times, and whether you need different levels for staff, cleaners, vendors or tenants. This conversation shapes everything that follows.

  2. 2

    Choose keypad, card, fob or a combination

    Keypads are simple and need no credentials to carry, but codes can be shared. Cards and fobs are easy to cancel individually when someone leaves. Some doors suit a combination. We explain the tradeoffs in plain language and recommend what fits your door and your team, not the most elaborate option.

  3. 3

    Confirm the door, lock and power setup

    Aluminum storefront doors, solid wood doors and glass doors each handle electric locking hardware differently. We check the frame, the existing lock, the fire-egress requirements for the door and how power will reach the device, then select compatible hardware such as electric strikes or electrified locks.

  4. 4

    Install, wire and secure the hardware

    We mount the reader or keypad, set the locking hardware, run and conceal wiring where practical and make sure the door still closes and latches properly. The goal is a clean installation that does not weaken the door or create a hazard for anyone exiting.

  5. 5

    Program credentials and test thoroughly

    We set up your codes, cards or fobs, test every one and confirm the door behaves correctly from both sides, including how it opens for people leaving. We make sure you understand how to add, change and remove users on your own.

  6. 6

    Hand-off and ongoing support

    You leave with a clear picture of how the system works and who to call if something needs adjusting. If you later add a door, a new employee group or a second location, we can extend the system rather than starting over.

Need access control in Agoura Hills?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The number of doors being controlled, since each entrance needs its own reader or keypad and locking hardware.
  • The type of door and frame, including aluminum storefront, wood, steel or glass, which affects which locking hardware can be used and how much prep is needed.
  • The credential type you choose: keypad codes, proximity cards, key fobs or a mix, along with how many credentials you need issued.
  • Wiring and power requirements, including how far cable must run and whether the wall or ceiling makes concealing it simple or complicated.
  • Whether you want standalone devices at each door or a networked system with centralized user management and activity records.
  • Whether existing hardware can be reused or must be replaced, and whether the work is scheduled in advance or needed after hours.

Why Agoura Hills chooses us

  • We have been working in Greater Los Angeles and Ventura County since 1987, so we have seen how a wide range of local commercial buildings are built and where installations go wrong.
  • We are fully mobile and available 24/7. There is no storefront; we come to your business, which also means we can work around your hours rather than yours around ours.
  • Owner David Shar leads our lock work, so the person advising you has long hands-on experience with both traditional locks and electronic hardware.
  • We recommend the simplest system that meets your needs. If a keypad does the job, we will not push a networked card system.
  • We pay attention to egress and door function, because an access system that traps people or leaves a door unlatched is worse than no system.
  • We can pair access control with rekeying, high-security cylinders and door hardware upgrades so the whole entrance works together.

Access Control across Agoura Hills

Agoura Hills sits along the US-101 corridor with Ladyface Mountain as its backdrop, and its commercial life spreads across Agoura Road, Kanan Road, Cornell Road and the shopping areas around Whizin's Market Square. Many storefronts here use aluminum frames and glass doors, which need hardware chosen with care. Offices and service businesses near the freeway often have a front entrance plus a rear door used by staff and deliveries, and those back doors are where credential control tends to matter most.

In ZIP code 91301, businesses and shared properties often ask us about managing access for several people at once. That might be a professional suite with multiple tenants, a clinic that wants to limit entry to certain rooms, or a small studio with rotating staff. Card and fob systems fit these situations well, because one lost credential can be cancelled without disturbing anyone else.

Residential communities such as Lake Lindero, Morrison Ranch and the semi-rural properties of Old Agoura also generate access questions, particularly for shared amenities, HOA common areas and gated entries, and we can discuss those separately. Whether your property is in 91301 or 91376, call (323) 997-8867 and we will come to the site to look at the door and recommend a practical setup.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Agoura Hills locksmith services

See all of our Agoura Hills services, or our citywide access control page.

Access Control in Agoura Hills — FAQs

What is the difference between keypad, card and fob access control?
A keypad uses a code that people memorize. A card or fob is a physical credential that is presented to a reader. Keypads are simple but codes can be shared, while cards and fobs can be cancelled one at a time. Call (323) 997-8867 and we can help you decide which suits your entrance.
Can you install access control on an aluminum storefront door?
Yes, but the hardware must be chosen to suit the narrow aluminum stile and frame. We look at the specific door before recommending an electric strike or electrified lock so the installation works reliably and the door still latches correctly.
Do you offer 24/7 service for access control in Agoura Hills?
We are a 24/7 mobile locksmith. If your system fails or you need a door secured after hours, call (323) 997-8867. Planned installations can also be scheduled around your business hours.
Can I cancel a lost card or fob without rekeying the building?
With a card or fob system, yes. You remove the lost credential from the system and it stops working, while everyone else keeps access. This is one of the main advantages over traditional keys.
Will access control affect fire safety or emergency exit?
It must not. Doors need to allow people to leave safely, so we plan the locking method and exit side with egress in mind. We discuss the requirements for your door during the on-site evaluation.
Can you add access control to a door that already has a lock?
Often yes. Depending on the existing hardware, we may be able to retrofit a keypad or reader and add electric locking, or we may recommend replacing certain parts. We check the door first to see what is practical.
Do I need a networked system or is a standalone keypad enough?
A small business with one or two doors and few users often does fine with standalone devices. A networked system makes more sense when you have many users, many doors or want centralized management. We will explain the difference honestly.
How do I get started?
Call (323) 997-8867 and describe your business entrance, how many doors you want to control and who needs access. We will arrange to look at the door in person and walk you through the options.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7