Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Whittier · 24/7 mobile

Panic Bar Installation in Whittier, California

Crenshaw Lock Company provides panic bar installation, repair and exit device service in Whittier, California, 24/7. Our fully mobile team comes to your storefront, office, church or warehouse and works on the door where it hangs. Call (323) 997-8867 to describe your door and schedule service.

  • Mobile to your Whittier location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of hardware on a commercial door that has to work every single time, from the inside, with no key and no thought. In Whittier that door might be the rear exit of a boutique on Whittier Boulevard, the side door of a church hall, a classroom wing, or the back of a warehouse off Painter Avenue. Whatever the building, the job is the same: let people out quickly and safely while keeping the door secure from the outside.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar has seen most of the ways exit hardware goes wrong: bars that bind because a door has sagged, latches that no longer catch the strike, outside trim that was never keyed to match the rest of the building, and old devices that were bolted on without regard for how the door is built. We install new panic bars and exit devices, and we repair or replace the ones already there.

We are fully mobile, so there is no storefront to visit. We come to you at any hour, look at the door, and talk through the options. Whittier has a mix of older masonry buildings, aluminum storefront doors and modern commercial space, and each calls for a slightly different approach to mounting and trim. We will explain what fits your door and why, and we will not push hardware your building does not need.

How it works in Whittier

  1. 1

    Tell us about the door

    Call (323) 997-8867 and describe the door: wood, hollow metal or aluminum storefront, single or double, and whether you are replacing a device or adding one. Photos help but are not required. We are available 24/7, including when a broken exit device is leaving a building unsecured overnight.

  2. 2

    On-site assessment

    We come to the building and examine the door, frame, strike and any existing hardware. We check that the door hangs and closes properly, because a sagging door will make even a new panic bar fail. We also look at how the door is used, such as who exits through it and whether it needs outside access.

  3. 3

    Choosing the right device

    Rim devices, vertical rod devices, mortise-style exit hardware and narrow-stile versions for aluminum doors each suit different situations. We recommend a device that fits the door and its use, and we explain trim choices such as a key-operated outside cylinder, a lever or a blank exterior plate.

  4. 4

    Installation and adjustment

    We mount the device, set the strike, and adjust the latch so the bar releases smoothly and the door closes and latches on its own. Where a door is out of alignment, we correct what we can as part of the job and tell you if a door repair is needed beyond lockwork.

  5. 5

    Testing and keying

    We operate the device repeatedly from the inside, test the outside trim, and confirm the door secures properly. If the exterior cylinder is part of the job, we can key it to match your existing system or set it up as a new keyed set.

  6. 6

    Walkthrough and follow-up

    We show you or your staff how the hardware works and how to spot early warning signs such as sticking, rattling or a latch that does not fully extend. If you have other doors to review, we can look at those while we are on site.

Need panic bar installation in Whittier?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim exit device differs in cost from a vertical rod or mortise-style device, and a fire-rated device differs from a non-rated one.
  • The door material and condition, since aluminum storefront, hollow metal and wood doors need different mounting methods, and a worn or misaligned door may need extra work.
  • Single versus double doors, and whether the pair needs an astragal, a removable mullion or vertical rods.
  • Outside trim and keying choices, including a key cylinder, a lever, or no exterior access, and whether it must match an existing key system.
  • Whether you are adding a new device, replacing an existing one, or repairing hardware that is already installed.
  • The number of doors in the project and whether the work is urgent after-hours service or can be scheduled.

Why Whittier chooses us

  • Fully mobile service means we work on the door at your building rather than asking you to bring hardware anywhere.
  • We have served Greater Los Angeles and Ventura County since 1987, so older masonry buildings and mixed commercial doors are familiar territory.
  • Owner and lead tech David Shar leads the work, so the person advising you has years of hands-on experience with exit hardware.
  • We are available 24/7, which matters when a failed exit device or a forced rear door needs attention outside business hours.
  • We fix door alignment problems that cause exit devices to fail, rather than just swapping hardware and leaving the cause behind.
  • We handle both the panic bar and the keyed trim, so you do not have to coordinate separate vendors for exit hardware and rekeying.

Panic Bar Installation across Whittier

Whittier's commercial doors vary a lot. Around Uptown Whittier and the historic district, many businesses occupy brick and Mission or Spanish Revival storefronts from the early 1900s through the 1920s. Rear and side doors in these buildings can be old wood or later aluminum replacements, and the frames are not always square. That affects how a panic bar mounts and latches, so we check the frame before choosing hardware. A boutique on Whittier Boulevard (SR-72) may need a storefront rekey, aluminum-door cylinder work and exit hardware service in a single visit, and we can handle those together.

Further out, the needs change. Along Painter Avenue, Colima Road and Beverly Boulevard you find offices, warehouses, schools and churches, many of which need dependable exit hardware for daily traffic. Near the Whittier College district, campus-area and community buildings often have doors used constantly by many people, where smooth operation and regular checks matter. In East Whittier and Friendly Hills, we also see small commercial and institutional spaces that were added to neighborhoods originally built for homes.

We serve all Whittier ZIP codes, including 90601, 90602, 90603, 90604, 90605, 90606, 90607 and 90608. Because we are mobile only, there is no shop to visit: call (323) 997-8867 any time, day or night, and we will come to the building.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Whittier locksmith services

See all of our Whittier services, or our citywide panic bar installation page.

Panic Bar Installation in Whittier — FAQs

Do you install panic bars on aluminum storefront doors in Whittier?
Yes. Aluminum storefront doors usually need a narrow-stile exit device that fits the slim door frame. We assess the door first and recommend a compatible device. Call (323) 997-8867 to discuss your door.
Can you repair an existing panic bar instead of replacing it?
Often, yes. Sticking bars, worn latches and misaligned strikes can frequently be repaired or adjusted. If the device is badly worn or the parts are no longer available, we will tell you replacement makes more sense.
Do you offer emergency panic bar service at night?
Yes, we are available 24/7. If an exit device has failed and the door cannot be secured, or a break-in has damaged it, call (323) 997-8867 and we will arrange service.
Can the outside of the door still be locked with a panic bar?
Yes. Exit devices can be fitted with exterior trim such as a key cylinder or lever, so the door stays secure from outside while remaining freely exitable from inside. We can key the cylinder to match your existing system.
Why does my panic bar not latch properly?
The most common causes are a sagging door, a misaligned strike, a worn latch or a door closer that is not closing the door fully. We inspect the whole door, not just the bar, so we can fix the underlying cause.
Do older Uptown Whittier buildings cause problems for panic bar installation?
They can. Older frames may be out of square or made of material that needs careful mounting. We inspect the frame before choosing hardware so the device is installed securely and operates smoothly.
Do you service doors that need fire-rated hardware?
We can discuss fire-rated exit devices when your door or building requires them. Requirements vary by building and use, so check with your local authorities or property manager, and call (323) 997-8867 to talk through the hardware.
Do I have to visit your shop to choose a device?
No. We are fully mobile and have no storefront. We come to your Whittier location, look at the door and go over the options with you on site.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7