Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Westmont · 24/7 mobile

Panic Bar Installation in Westmont, California

Crenshaw Lock Company provides mobile panic bar installation and repair in Westmont, California, available 24/7. We come to your storefront, shop or building and install or fix exit devices and emergency-exit hardware. Call (323) 997-8867 to talk through your door and get scheduled.

  • Mobile to your Westmont location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar has one job that matters more than any other: when someone pushes on it in an emergency, the door opens. Along Western Avenue, Vermont Avenue and the Imperial Highway commercial strip in Westmont, that job often falls to doors that have been in service for decades, such as the rear exit of a market, the side door of an auto shop, or the back of a mini-mall unit. Those doors get slammed, propped open, kicked, and pried at, and the exit hardware shows it.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar has seen just about every way an exit device can fail or be installed wrong. We are fully mobile, so there is no storefront to visit. We bring the work to your door, look at what is actually there, and install or repair the device so it releases freely from inside while the door stays secure from outside.

Whether you are putting a first panic bar on a converted unit, replacing a rusted-out device, or fixing a bar that sticks, drags, or no longer latches, we walk you through the options in plain language. We do not make promises about code approvals on your behalf, since requirements depend on your occupancy and your local authority, but we can help you install hardware that fits the door and the way your business uses it.

How it works in Westmont

  1. 1

    Talk through the door and the problem

    Call (323) 997-8867 and tell us about the door: wood, hollow metal, aluminum storefront, or a door behind a roll-down gate. Tell us whether it is a new install, a replacement, or a repair, and what the existing hardware does or fails to do.

  2. 2

    Inspect the opening on site

    We come to you and look at the door, frame, hinges, and any existing hardware. Many Westmont commercial doors have been patched over the years, so we check for warped edges, rusted latches, and misaligned strikes before recommending a device.

  3. 3

    Choose the right exit device

    We explain options such as rim-style devices, vertical rod devices for double doors, and exterior trim choices like a lever or a key cylinder. The goal is a device that matches the door type and how you need it to function from outside.

  4. 4

    Install and align the hardware

    We mount the device, set the latch and strike, and make sure the door closes and latches fully. Proper alignment matters because a bar fighting a sagging door will wear out quickly or fail to latch.

  5. 5

    Test the release and the security

    We push the bar repeatedly to confirm it releases smoothly, check that the door secures from outside, and test any key or trim function. If the door is not closing properly, we address it so the device can do its job.

  6. 6

    Walk you through use and upkeep

    We show you how the device works, what to watch for, and what to avoid, such as propping the door or chaining it shut. A quick check now and then keeps a panic bar dependable.

Need panic bar installation in Westmont?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim device, a vertical rod model for double doors, or a heavier-duty unit all differ in hardware cost and installation effort.
  • The condition of the door and frame: a warped, rusted, or damaged door may need repair or adjustment before a device mounts and latches properly.
  • Door material: wood, hollow metal, and aluminum storefront doors each require different mounting methods and fasteners.
  • Whether you need an exterior trim, key cylinder, or lever, and whether you want the cylinder keyed to match your existing system.
  • Removal of old hardware: taking out an existing device, filling old holes, or fitting around leftover cutouts can add time.
  • The time of day: nights, weekends, and holidays are handled as emergency calls when a door will not secure.

Why Westmont chooses us

  • Fully mobile, so we work at your door instead of asking you to haul anything anywhere. There is no storefront to visit.
  • In business since 1987, with owner David Shar leading the technical work, so you are not handed off to an unknown crew.
  • Available 24/7, which matters when a failed exit device leaves a Westmont shop unable to close up safely.
  • We look at the whole opening, not just the bar. If the strike, hinges, or door closer is the real problem, we tell you.
  • We are honest about what we can and cannot sign off on. For code and occupancy questions, we point you to the right authority instead of guessing.
  • Familiar with the roll-down gates, older storefronts, and worn doors common along Western, Vermont, and Imperial.

Panic Bar Installation across Westmont

Westmont sits between the Western Avenue and Vermont Avenue corridors, and the working commercial strips there are full of the kinds of doors that need good exit hardware: market back doors, auto shop side exits, and mini-mall units that share rear access. In ZIP codes 90047 and 90044, we see businesses along Imperial Highway and near the Vermont and Manchester corridor where a rear door is the only practical emergency exit, and it is often an older steel or wood door that has taken years of abuse.

Many of these storefronts also use roll-down security gates, which means a panic bar has to work alongside other security measures rather than against them. We pay attention to how the gate, the front door, and the rear exit all function together, so a person inside can always get out. We also serve neighboring Vermont Knolls and West Athens, where small businesses and multi-unit buildings share similar needs.

For property owners near Jesse Owens Community Regional Park on South Western Avenue, around Washington Preparatory High School, or along Florence Avenue and Manchester Avenue, we can come out any hour. Call (323) 997-8867 and we will arrange a visit to your door.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Westmont locksmith services

See all of our Westmont services, or our citywide panic bar installation page.

Panic Bar Installation in Westmont — FAQs

Do you install panic bars on Westmont storefronts and mini-mall units?
Yes. We install and repair panic bars and exit devices on storefront, rear, and side doors throughout Westmont. Call (323) 997-8867 to describe your door and set up a visit.
Can you repair my existing panic bar instead of replacing it?
Often, yes. Sticking bars, worn latches, and misaligned strikes can frequently be fixed. If the device is too worn or corroded, we will tell you honestly and explain replacement options.
Do you offer emergency service if my exit door will not latch?
We are available 24/7. If a door will not close or secure properly, call (323) 997-8867 and we will work out how to get it secured.
Do I have to come to your shop?
No. We are fully mobile and have no storefront to visit. We come to your location in Westmont and do the work at the door.
Will a panic bar work on a door behind a roll-down gate?
In many cases, yes, but the gate and door have to be considered together. We check that the exit path stays usable from inside and that the hardware fits your door.
Can you tell me what code requires for my building?
Requirements depend on your occupancy type and local authority, so we cannot sign off on code for you. We can install quality hardware and suggest you confirm requirements with your local fire or building officials.
Can the outside of the door still be locked with a panic bar?
Yes. Exit devices can be paired with exterior trim, such as a key cylinder or lever, so the door stays secure from outside while opening freely from inside.
What should I tell you when I call?
Let us know the door material, whether it is a single or double door, what the current hardware is, and what is going wrong. Calling (323) 997-8867 with that info helps us come prepared.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7