Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Thousand Oaks · 24/7 mobile

Commercial Door Hardware Repair and Replacement in Thousand Oaks, CA

Crenshaw Lock Company provides commercial door hardware repair and replacement in Thousand Oaks, California, around the clock. Our fully mobile technicians come to your storefront, office or suite to fix or replace storefront, aluminum-frame and mortise hardware. Call (323) 997-8867 any hour, any day.

  • Mobile to your Thousand Oaks location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door works harder than almost any other part of a building. A retail entrance on Thousand Oaks Boulevard might open and close hundreds of times a day, and an office suite door in a business park carries the weight of every employee, delivery and visitor. When the hardware starts to fail, you notice: a latch that drags, a push bar that no longer retracts, a closer that slams, or a lock cylinder that turns only after some jiggling. Those small problems tend to become after-hours emergencies, usually when a door will not lock and the business is left exposed overnight.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar built the company around practical commercial and residential work. We are 24/7 and fully mobile. There is no storefront to visit; we bring the tools and a working knowledge of storefront, aluminum-frame and mortise hardware to you. That means we can diagnose the door where it hangs, which matters because the cause is often alignment, wear or a mismatched part rather than the lock itself.

Our commercial door hardware work covers repair and replacement. Sometimes a worn latch, strike or cylinder can be serviced and the door goes back to work. Other times the hardware is past saving, or no longer suits how the door is used, and replacement is the honest recommendation. We explain which situation you are in and what each choice involves, so you can decide with clear information.

How it works in Thousand Oaks

  1. 1

    Call and describe the door

    Call (323) 997-8867 and tell us what the door is doing: type of frame (aluminum storefront, hollow metal or wood), type of hardware, and whether it is secure right now. If the building cannot be locked, say so, and we treat that as the priority.

  2. 2

    We come to you

    Because we are fully mobile and available 24/7, a technician travels to your location in Thousand Oaks, whether that is a storefront, an office suite or a tenant space. We bring a range of common commercial parts and tools for on-site work.

  3. 3

    Inspect the door, frame and hardware

    Before replacing anything, we check how the door hangs, whether the frame has shifted, how the closer is adjusted, and whether the latch, strike, pivot or cylinder is the real culprit. Aluminum storefronts and mortise doors fail in different ways, so the diagnosis guides the fix.

  4. 4

    Repair or replace, with a clear recommendation

    We explain whether adjustment, repair or replacement makes sense. For mortise hardware, that may mean servicing or swapping a lock body. For storefront doors, it may involve push bars, rim or deadlatch hardware, closers or cylinders. You approve the plan before work begins.

  5. 5

    Install, test and finish cleanly

    We install the hardware, align the strike and latch, adjust closing and latching action, and cycle the door repeatedly with keys in hand. If you want keying coordinated with an existing system, we can address that during the visit.

  6. 6

    Walk-through and follow-up advice

    Before we leave, we show you how the door should operate and point out any wear on neighboring doors worth watching. You leave with a door that locks and a clear idea of what, if anything, to plan for next.

Need commercial door hardware in Thousand Oaks?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door and frame: aluminum storefront, hollow metal and wood doors with mortise locks each need different parts and different labor.
  • Repair versus full replacement: adjusting or rebuilding existing hardware is a different scope than swapping out a complete device.
  • The grade and style of hardware chosen, such as standard function versus heavier-duty commercial grades, panic or exit devices, or specialty finishes.
  • Whether the part is a common stock item or an older or discontinued mortise body that must be sourced or matched.
  • Keying requirements, including matching an existing key system, restricting keys, or integrating with a master-key setup.
  • Time of day and urgency: an after-hours emergency call to secure a building is handled differently from a scheduled daytime upgrade, and the number of doors affects the total.

Why Thousand Oaks chooses us

  • Fully mobile service means we work on your actual door in place, rather than asking you to bring parts or a lock to a shop.
  • Open 24/7, so a storefront that will not lock at night is something we can respond to rather than leave until morning.
  • In business since 1987, with hands-on experience across storefront, aluminum-frame and mortise hardware.
  • We diagnose before we replace, checking alignment, closers and frames so you are not paying for a new lock that fixes nothing.
  • We can handle keying alongside the hardware, which helps tenants and managers who need doors to fit into a master-key plan.
  • Straight recommendations: if repair will do, we say so, and if replacement is smarter, we explain why.

Commercial Door Hardware across Thousand Oaks

Thousand Oaks has a commercial mix that puts real demands on door hardware. The Oaks mall and the retail corridors along Thousand Oaks Boulevard and Moorpark Road rely on storefront entrances that see heavy daily use. Around the Civic Arts Plaza and the Fred Kavli Theatre, public-facing doors need to function reliably for crowds and still lock down at the end of the night. Further out, the large office and biotech parks, with Amgen's headquarters campus as the best-known neighbor, create demand for tenant suites with multiple interior and exterior doors, master-key systems and access control.

We serve the whole city and its neighborhoods, including Newbury Park, North Ranch, Dos Vientos Ranch and Lynn Ranch. A small office or shop in Newbury Park near ZIP 91320 may have a single aluminum-frame entry that has worn after years of use, while a professional suite near 91360 or 91362 might need mortise hardware serviced or keyed to fit a building system. We also work in the 91358 and 91359 areas, where business and home-based office doors have their own needs.

Getting around is straightforward from US-101 and SR-23, with Moorpark Road, Lynn Road, Hampshire Road and Borchard Road connecting the business areas to the surrounding neighborhoods. Wherever the door is, from a storefront near California Lutheran University to a suite in a business park off Thousand Oaks Boulevard, our mobile technicians come to you at any hour. Call (323) 997-8867.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Thousand Oaks locksmith services

See all of our Thousand Oaks services, or our citywide commercial door hardware page.

Commercial Door Hardware in Thousand Oaks — FAQs

What kinds of commercial door hardware do you repair and replace in Thousand Oaks?
We work on storefront, aluminum-frame and mortise door hardware, including locks, latches, cylinders, push bars, closers and related parts. Call (323) 997-8867 and describe your door, and we will tell you what we can do.
Do you offer emergency service if my business door will not lock?
Yes. We are available 24/7 and fully mobile, so a door that cannot be secured is something we treat as a priority. Call (323) 997-8867 at any hour.
Is it better to repair or replace commercial door hardware?
It depends on the condition of the hardware, the door and the frame. Misalignment or a worn part can often be repaired, while heavily worn or outdated hardware may be better replaced. We inspect first and give you an honest recommendation.
How is commercial door hardware priced?
Price depends on the door and frame type, repair versus replacement, hardware grade, part availability, keying needs, urgency and how many doors are involved. We explain the scope before work begins so there are no surprises.
Can you work on aluminum storefront doors?
Yes. Aluminum-frame storefront doors are a regular part of our work, including latches, deadlocks, push bars, pivots and closers. Narrow stiles and frame movement call for the right parts, and we check both.
Can you key new hardware to match my existing keys or a master-key system?
Often, yes. We can coordinate keying during hardware replacement so new locks fit your system, which is useful for multi-suite offices and tenant spaces. Call (323) 997-8867 to discuss your setup.
Do you have a shop I can visit?
No. We are a fully mobile company with no storefront. Our technicians come to your business anywhere in Thousand Oaks, including Newbury Park and the surrounding neighborhoods.
Why does my commercial door stick or fail to latch?
Common causes include a closer that needs adjustment, a shifted frame, a worn latch or strike, or hinge and pivot wear. We check the whole door rather than only the lock, so the actual cause gets fixed.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7