Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in South Gate · 24/7 mobile

Panic Bar Installation in South Gate, CA

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware in South Gate, California. We are fully mobile and available 24/7, so we come to your business wherever it is. Call (323) 997-8867 to describe your door and get started.

  • Mobile to your South Gate location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of door hardware that has to work perfectly on the worst day. When people need to leave a building quickly, a push on the bar must release the latch every time, with no key, no knob to twist and no second step. In South Gate, that matters for a wide mix of buildings: retail units along Tweedy Boulevard, shops in and around the Azalea Regional Shopping Center, warehouses and light industrial buildings off Firestone Boulevard and Alameda, and the offices, churches and small schools tucked between the residential blocks.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and David Shar leads the work. We are a mobile service with no storefront to visit. We bring the tools and hardware knowledge to your door, look at what is actually installed, and tell you plainly whether you need a new exit device, a repair, or just an adjustment. Many panic bar problems turn out to be a misaligned strike, a worn latch, or a door that has sagged on its hinges, and those are often fixable without replacing everything.

We handle new installs on doors that never had an exit device, replacements for bars that are bent, sticking or broken, and rim, mortise and vertical rod styles for single and double doors. We also work with the lock side of the equation, such as an outside key cylinder, trim or a dogging feature, so the door can stay secure from outside while remaining free to exit from inside. Because requirements for exit doors can depend on the building's use and occupancy, we encourage you to confirm what your building needs with your local fire and building authorities, and we will install the hardware to suit the door you have.

How it works in South Gate

  1. 1

    Call and describe the door

    Phone (323) 997-8867 any hour and tell us about the door: single or double, wood, hollow metal or aluminum storefront, and whether an old bar is already there. Photos of the door edge and the existing hardware help us arrive prepared.

  2. 2

    On-site assessment

    We come to your South Gate location and inspect the door, frame, hinges and closer. A panic bar only performs as well as the door it is mounted on, so we check for sag, rubbing, a loose frame or a worn strike before choosing hardware.

  3. 3

    Choose the right device

    We explain the options in plain language: rim exit devices for most single doors, mortise styles where the door is prepared for them, and vertical rod devices for double doors without a center post. We match the device to the door, its use and how you want it to lock from outside.

  4. 4

    Installation and alignment

    We mount the device, set the strike, fit any outside trim or cylinder, and adjust the latch so it catches cleanly and releases with a light push. On aluminum storefront doors and steel doors we use hardware made for those materials.

  5. 5

    Testing and walkthrough

    We operate the door repeatedly, check that it closes and latches on its own, and confirm the bar releases without catching. We then show you how any dogging or key feature works so your staff can use it correctly.

  6. 6

    Follow-up repairs and rekeying

    If you also need locks rekeyed, a roll-down grille padlock, or other doors checked, we can handle that on the same visit so the whole building is consistent.

Need panic bar installation in South Gate?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim bar, a mortise exit device and a concealed or surface vertical rod device differ in hardware cost and in the labor to fit them.
  • Door material and condition: steel, wood and aluminum storefront doors each need different mounting methods, and a door that sags or has a damaged edge may need repair first.
  • Single versus double doors: a pair of doors usually means more hardware, more adjustment and more time than a single door.
  • Whether it is a new installation or a replacement: replacing a bar that fits existing preparation is usually simpler than cutting and drilling a door that never had one.
  • Outside trim, cylinders and keying: a lever trim, key cylinder, or a rekey to match your existing keys adds parts and time.
  • Timing and location: after-hours or urgent calls differ from scheduled daytime work, and we give a quote after hearing about your door rather than guessing.

Why South Gate chooses us

  • We have been in business since 1987, so we have seen a wide range of exit hardware, including older devices that are no longer easy to find parts for.
  • We are fully mobile and available 24/7, which matters when a broken exit device leaves a door unsecured at night.
  • We diagnose before replacing. If adjusting the strike or fixing a sagging door solves the problem, we will say so.
  • Exit hardware and lock work come from one team, so the panic bar, outside cylinder, rekey and any grille padlock can be handled together.
  • The owner, David Shar, leads the work, and you get plain answers about what the door needs.
  • We give a quote based on your specific door and hardware rather than a one-size-fits-all number.

Panic Bar Installation across South Gate

South Gate's commercial buildings are as varied as the city itself. Along Tweedy Boulevard on the Tweedy Mile, older storefronts often have original doors that have been patched and re-hung over decades, and a new panic bar needs to account for that. Newer retail around the Azalea Regional Shopping Center tends to use aluminum storefront doors, which call for hardware designed for narrow stiles. In the Firestone Boulevard corridor and the industrial areas toward Alameda and the LA River, steel doors and rear exits serving warehouses and shops are common.

We work across the 90280 ZIP code, from business streets near Atlantic Avenue, Garfield Avenue and Imperial Highway to buildings close to the I-710 and the nearby SR-105. Whether you run a shop in the Tweedy Mile business district, a small business in Hollydale, or a facility near South Gate Park or Hollydale Park, we come to you rather than asking you to visit a shop.

There is also a practical overlap with other lock needs here. A Tweedy Mile shop changing ownership may want a full rekey, a new roll-down grille padlock and a check of the rear exit device all in one visit. We can look at the whole building and keep your keying and exit hardware consistent.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other South Gate locksmith services

See all of our South Gate services, or our citywide panic bar installation page.

Panic Bar Installation in South Gate — FAQs

Do you install panic bars on South Gate storefront doors?
Yes. We install and repair panic bars and exit devices on wood, steel and aluminum storefront doors. Call (323) 997-8867 and describe your door, and we will come to your business.
Can you repair my existing panic bar instead of replacing it?
Often, yes. Sticking, loud or non-latching bars are frequently caused by a misaligned strike, a worn latch or a sagging door. We inspect first and replace only what is needed.
Are you available after hours or on weekends?
We are available 24/7 and fully mobile. If a broken exit device leaves your door unsecured, call (323) 997-8867 any time.
Can the door stay locked from outside while the bar still lets people exit?
Yes. Exit devices are designed so the inside always releases with a push, while the outside can be secured with a key cylinder or trim. We set it up to suit how your business uses the door.
Do you handle double doors?
Yes. Pairs of doors may use rim devices with a removable center mullion or vertical rod devices, depending on the doors and frame. We recommend the option that fits your doors.
Do I need to check code requirements for my building?
Requirements can depend on how your building is used and how many people occupy it. We recommend confirming with your local fire and building authorities. We install the hardware to suit your door.
Can you also rekey the locks and fit a grille padlock?
Yes. We can rekey your locks, address roll-down grille padlocks and install exit devices in the same visit, which suits businesses changing hands on the Tweedy Mile.
How do I get a quote?
Call (323) 997-8867 and tell us about the door, the type of device you want, and whether it is new or a replacement. Photos help. We base the quote on your specific situation.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7