Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Sierra Madre · 24/7 mobile

Panic Bar Installation in Sierra Madre, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware in Sierra Madre, California. We are fully mobile and available 24/7, coming to your shop, studio, church hall or office. Call (323) 997-8867 to describe your door and get started.

  • Mobile to your Sierra Madre location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the piece of hardware that lets people leave a building quickly when it matters most, with a single push and no key, knob or special knowledge. In a town as compact as Sierra Madre, where many businesses occupy small older buildings, getting that hardware right takes some care. Back doors that open onto alleys, side doors from converted cottages and storefronts that were never designed for a crowd all need exit hardware that works every time and still keeps the door secure from the outside.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead tech David Shar has seen nearly every kind of door that needs an exit device: aluminum storefront doors, solid wood doors, hollow metal doors and older doors that have been patched and repainted for decades. We install new panic bars, replace worn or broken ones, repair sticking latches and misaligned strikes, and set up the outside trim so the door stays locked to the public but always opens from inside.

We are a mobile service only. There is no storefront to visit. We come to you with the tools and common hardware, look at the door in person, and talk through what fits the door and how the space is used. Because exit requirements depend on occupancy, the type of door and local code, we will be straightforward about what we can do and when it makes sense to check with your building owner, landlord or the local fire and building authorities before we begin.

How it works in Sierra Madre

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us what kind of door it is (glass storefront, wood, hollow metal), whether it is a single or double door, what hardware is there now, and what is not working. Photos help if you can send them.

  2. 2

    On-site assessment

    We come to the building and inspect the door, frame, hinges, threshold and closer. A panic bar only works well on a door that hangs and closes properly, so we check for sag, rubbing and misalignment that would cause the device to bind.

  3. 3

    Choose the right device

    We go over options such as rim exit devices, vertical rod devices for double doors, and mortise-style exit hardware, along with outside trim choices like a key cylinder, lever trim or no outside trim at all for a door that should be exit-only.

  4. 4

    Installation and alignment

    We mount the device, set the strike and latch, and adjust the bar so it presses smoothly and the latch retracts fully. If the door needs a closer adjustment or small frame work for proper latching, we address that so the device is not fighting the door.

  5. 5

    Testing and key setup

    We operate the device repeatedly from inside and outside, confirm the door latches by itself and that the outside stays secure. Where there is a cylinder, we can key it to match your existing keys or set it up on its own.

  6. 6

    Walkthrough and care tips

    Before leaving, we show you how the hardware works and what to watch for, such as a bar that begins to stick or a latch that no longer catches, so small problems get fixed before they become a stuck or unsecured door.

Need panic bar installation in Sierra Madre?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door: aluminum storefront, wood and hollow metal doors each need different mounting methods and compatible hardware.
  • Single door versus a pair of doors, since double doors often need vertical rod or concealed devices and extra alignment work.
  • The type of device chosen, from a basic rim exit device to heavier-duty or specialty hardware.
  • Whether the job is a new installation, a replacement of an old device, or a repair of the existing one.
  • Condition of the door and frame, including any needed adjustment, reinforcement or closer work for reliable latching.
  • Outside trim and keying needs, such as a keyed cylinder matched to existing keys versus an exit-only door, and the time of day the call is made.

Why Sierra Madre chooses us

  • Fully mobile and available 24/7, so a broken exit device or an unsecured back door does not have to wait for business hours.
  • In business since 1987, with owner and lead tech David Shar bringing decades of hands-on experience with older and unusual doors.
  • We look at the door, not just the device. Sagging hinges and bad closers are a common reason panic bars fail, and we check for them.
  • We handle the whole door: exit hardware, rekeying, cylinders and related lock work in one visit instead of several contractors.
  • Honest guidance on what we can do and when your landlord, building owner or local authorities should weigh in on code questions.
  • Comfortable with the small, older commercial spaces common in foothill towns, where nothing is quite standard.

Panic Bar Installation across Sierra Madre

Sierra Madre is a small, walkable foothill town, and its commercial life is concentrated around Downtown Sierra Madre and Kersting Court, where small shops, cafes and offices occupy compact storefronts. These buildings often have a rear or side door that doubles as an exit and sees heavy daily use from deliveries and staff. A panic bar on that door has to be dependable and also keep the building secure after closing. Many of these spaces are in ZIP code 91024, and we regularly think through the kinds of doors found there, from glass storefront entries to older wood doors in converted buildings.

The town's character comes from its early-1900s Craftsman cottages, Victorians and bungalows, and some of those have been turned into offices, studios or small businesses. Doors in older buildings are rarely square, and frames shift over a century. We take that into account, adjusting alignment so an exit device latches cleanly rather than forcing hardware onto a door that does not suit it. Near the famous wisteria vine and along Sierra Madre Blvd, Baldwin Ave and Michillinda Ave, you will find a mix of these older buildings and newer construction.

Farther up, Sierra Madre Canyon, in ZIP code 91025, has narrow, steep lanes where parking is tight. When a job is up there, we park where we can and carry our tools to the door, which is simply part of working in the canyon. Whether you run a shop near Kersting Court, manage a community space near Bailey Canyon Wilderness Park, or need exit hardware on a side door off Sierra Madre Villa Ave, we come to you, with I-210 close by for reaching the rest of the foothills.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Sierra Madre locksmith services

See all of our Sierra Madre services, or our citywide panic bar installation page.

Panic Bar Installation in Sierra Madre — FAQs

Do you install panic bars on Sierra Madre storefront doors?
Yes. We install exit devices on aluminum and glass storefront doors, wood doors and hollow metal doors. Call (323) 997-8867 and tell us what your door is made of so we can bring suitable hardware.
Are you available at night or on weekends?
Yes. Crenshaw Lock Company is a 24/7 mobile service. If a panic bar fails or a door will not latch securely after hours, call (323) 997-8867.
Do you have a shop in Sierra Madre I can visit?
No. We are fully mobile only and come to your location, whether that is near Kersting Court or elsewhere in town.
Can you repair my existing panic bar instead of replacing it?
Often, yes. Sticking bars, loose mounting, worn latches and misaligned strikes can frequently be repaired. We inspect first and tell you honestly whether repair or replacement makes more sense.
Can the outside of the door stay locked while the panic bar still works?
Yes. That is the normal design. The door stays locked from outside, with a key cylinder or no outside trim at all, while the bar always allows exit from inside.
Can you work on older buildings with uneven doors?
Yes. Many Sierra Madre buildings are decades old and their doors and frames have shifted. We adjust alignment and latching so the device works properly on the door you actually have.
Do I need to check code requirements before installing?
Exit hardware requirements depend on occupancy and the type of building, so it is wise to check with your landlord, building owner or local authorities. We are happy to discuss your door and what hardware suits it. Call (323) 997-8867.
Can you key the outside cylinder to match my other locks?
In many cases we can key a cylinder to match existing keys or set it up separately, and we can rekey other locks on the property during the same visit.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7