Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Santa Clarita · 24/7 mobile

Panic Bar Installation in Santa Clarita, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware throughout Santa Clarita, California. We are fully mobile and available 24/7, coming to your door, warehouse or storefront. Call (323) 997-8867 to talk through your door and get started.

  • Mobile to your Santa Clarita location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of hardware on a commercial building that has to work perfectly on its worst day. When people need to leave quickly, a push on the bar should release the door every time, with no key, no knob and no second motion. In Santa Clarita, that applies to a wide range of buildings: warehouses and light-industrial units in Valencia, restaurants and shops around Old Town Newhall, offices, classrooms, churches, gyms and retail suites along Soledad Canyon Rd and Valencia Blvd.

Crenshaw Lock Company has been serving Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar and our team bring that experience to panic hardware. We install new exit devices on doors that never had them, replace worn or damaged bars, and repair devices that stick, fail to latch, rattle loose or won't retract. We also handle the outside trim, meaning the lever, pull or cylinder that lets staff enter from the exterior while the bar keeps the exit side free.

We are a mobile service only, so there is no shop to visit. A technician comes to your building with hardware and tools on the vehicle, looks at the actual door, and works from what is there. That matters because exit devices are sensitive to the door itself: how it hangs, what it is made of, how it closes and what the frame looks like. A good installation starts with reading the door correctly.

How it works in Santa Clarita

  1. 1

    Tell us about the door and the building

    Call (323) 997-8867 and describe what you have: single or double door, steel, aluminum storefront or wood, and whether you need a new device or a repair. Mention whether the door is an exit from a public space, a rear warehouse door or an interior stairwell, since that shapes what hardware makes sense.

  2. 2

    On-site assessment

    Our technician comes to your Santa Clarita location and inspects the door, frame, hinges, closer and any existing hardware. We check that the door swings and latches properly first, because a panic bar cannot fix a door that sags or drags.

  3. 3

    Choosing the right device

    We match the device to the door: rim exit devices for most single doors, vertical rod or concealed-rod styles for double doors, and narrow-stile versions for aluminum storefronts. We also discuss the outside trim and whether you need keyed entry, a lever, or an exit-only door.

  4. 4

    Installation and alignment

    We mount the device, fit the strike and set the latch so it engages cleanly without binding. On metal doors that can mean drilling and reinforcing; on storefronts it means working with the narrow stile. We test the pushbar repeatedly so it retracts smoothly under normal use.

  5. 5

    Final testing and walkthrough

    Before we leave, we test the exit side, the entry trim and the closing action, and show you how to operate and maintain it. We also point out anything else about the door, like a worn closer or loose hinge, that could affect how well the hardware performs.

Need panic bar installation in Santa Clarita?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim exit device, a rod-style device for double doors and a storefront narrow-stile model all differ in hardware cost and labor.
  • Door material and condition: steel, aluminum and wood doors require different mounting, and a door that needs reinforcement or prep work takes more time.
  • Whether this is a new installation or a replacement: replacing a device with the same footprint is usually simpler than cutting a door for hardware that was never there.
  • Outside trim and keying: a lever trim, a keyed cylinder, or a request to key the exterior to your existing system changes the parts and the work.
  • Extra features like alarms, delayed egress or fire-rated hardware, which depend on the building's needs and use.
  • Timing and location: after-hours calls and the distance to your site within the Santa Clarita area can affect the final quote.

Why Santa Clarita chooses us

  • Fully mobile and available 24/7, so a failed exit door at a closing-time restaurant or an overnight warehouse doesn't have to wait for business hours.
  • In business since 1987, with experience across commercial doors of many ages and types, including older steel doors and newer aluminum storefronts.
  • We fix the door as well as the hardware. If a closer, hinge or strike is why the bar fails, we tell you rather than just swapping parts.
  • Clear conversation about what is needed. We explain the options and don't push features your door or building doesn't call for.
  • One team for the whole door: exit devices, rekeying the outside cylinder, and related commercial lock work, so you aren't coordinating several vendors.

Panic Bar Installation across Santa Clarita

Santa Clarita's commercial buildings are spread across several distinct areas, and panic hardware needs vary with each. In Valencia, industrial centers and business parks near I-5 and Newhall Ranch Rd have rear and side exit doors that see constant forklift, pallet and delivery traffic, which is hard on exit devices. A typical call is a warehouse door where the bar no longer retracts or the latch has stopped catching, leaving a security or safety problem at the same time. Retail and dining spaces around Westfield Valencia Town Center and Valencia Blvd have a different need: neat, reliable hardware on storefront doors.

In Old Town Newhall, older buildings and converted storefronts along and near Main Street can have unusual door sizes and frames, so we measure and fit rather than assume. Businesses in Saugus, Canyon Country and along Soledad Canyon Rd and Sierra Highway include offices, shops, gyms and service units, many with back doors that serve as required exits. Near College of the Canyons, schools and training spaces also rely on dependable exit hardware. For buildings in ZIP codes like 91355, 91350 or 91351, we come to you.

Santa Clarita sits where I-5 and CA-14 meet, so we can reach the whole valley, from Plum Canyon to Newhall, without you needing to travel anywhere. If you manage several suites or properties, we can look at multiple doors in one visit and flag any that are worn or not latching properly, so problems get handled before they become emergencies.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Santa Clarita locksmith services

See all of our Santa Clarita services, or our citywide panic bar installation page.

Panic Bar Installation in Santa Clarita — FAQs

What is a panic bar and when do I need one?
A panic bar, or exit device, is a push-style bar on the inside of a door that releases the latch when pressed. Many commercial and public-assembly buildings use them on exit doors. Requirements depend on the building's use and occupancy, so check with your local building or fire authority, and call us at (323) 997-8867 to discuss the hardware.
Can you install a panic bar on an existing door in Santa Clarita?
Usually yes. We inspect the door material, thickness, frame and swing first. Steel and aluminum storefront doors are common installs, and some doors need reinforcement or a different style of device to work properly.
My panic bar sticks or won't latch. Can it be repaired?
Often. Common causes include a worn latch, a misaligned strike, a sagging door or a damaged mechanism. We look at the whole door and repair or replace what is actually causing the problem.
Do you work on double doors and storefront doors?
Yes. Double doors may use rod-style or other devices, and aluminum storefront doors often need narrow-stile hardware. We match the device to the door.
Can the outside of the door still be locked with a key?
Yes. Most exit devices are paired with outside trim, such as a keyed lever or cylinder, so staff can enter while the exit side stays free. We can also key it to your existing system. Call (323) 997-8867 to discuss it.
Do you offer emergency service for a failed exit door at night?
We are mobile and available 24/7. If an exit door won't secure or won't open, call (323) 997-8867 and we will talk through the situation and get a technician to you.
Do you have a shop I can visit?
No. We are fully mobile, so everything happens at your building in Santa Clarita. Our technician brings the hardware and tools to the door.
How is the price determined?
It depends on the device type, door material and condition, whether it is new work or a replacement, the outside trim and any added features. We explain the factors and give you a clear picture before work begins.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7