Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Redondo Beach · 24/7 mobile

Panic Bar Installation in Redondo Beach, CA

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware throughout Redondo Beach, California. We are fully mobile and available 24/7, coming to your restaurant, shop, office or marina site. Call (323) 997-8867 to describe your door and get started.

  • Mobile to your Redondo Beach location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar has one job that matters more than any other: when someone pushes on it in an emergency, the door opens. Everything else about the hardware, from the finish to the key cylinder on the outside, is secondary to that. In Redondo Beach, where restaurants line the pier area, shops fill Riviera Village, and boat-related businesses operate around King Harbor, getting that one job right is a safety question as well as a security one.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar has seen how often exit hardware is installed badly or left to decay. Common problems include a bar mounted at the wrong height, a latch that no longer fully retracts, a door that drags on its frame so the bar must be shoved hard, or an exterior trim that no longer matches the way staff actually lock up at night. We handle new installs, replacements and repairs of panic bars and related exit devices.

We are a mobile service only. There is no storefront to visit. We come to you with the hardware and tools for the job, look at the actual door, and talk through what makes sense before work begins. Coastal air is hard on metal, so we pay close attention to finish, fasteners and moving parts on any door that sees salt exposure.

How it works in Redondo Beach

  1. 1

    Describe the door and the use

    Call (323) 997-8867 and tell us what kind of door it is: wood, hollow metal, aluminum storefront or glass. Tell us whether it is a single or double door, and whether it serves a back-of-house exit, a customer entrance or a storage room. That helps us bring suitable hardware.

  2. 2

    On-site assessment

    We inspect the door, frame, hinges, closer and any existing hardware. A panic bar only works well on a door that hangs square and closes fully, so we check alignment, frame condition and clearances before mounting anything.

  3. 3

    Choosing the right device

    We discuss options such as rim exit devices, surface or concealed vertical rod devices for double doors, and exterior trim choices, including a key cylinder, a lever or no outside access at all. We explain the tradeoffs in plain language. For code questions that affect your occupancy, we recommend you confirm requirements with your local fire authority or building department.

  4. 4

    Installation and fitting

    We mount the device at a proper working height, align the strike and latch, and adjust the door where needed so the bar retracts smoothly. On coastal sites we favor durable finishes and make sure fasteners are suited to the environment.

  5. 5

    Testing and walkthrough

    We operate the device repeatedly from inside and test the exterior trim. We confirm that the door latches on closing and releases under light pressure. We show you or your staff how everything works and what to watch for.

  6. 6

    Repairs and follow-up

    If you already have a bar that sticks, rattles or fails to latch, we can often repair or rebuild it rather than replace it. If a device is worn beyond a sensible fix, we tell you so and explain why.

Need panic bar installation in Redondo Beach?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of device: a basic rim bar, a vertical rod model for double doors, and a heavy-duty or fire-rated unit all differ in hardware cost and labor.
  • Door material and condition, since hollow metal, wood, aluminum storefront and glass doors each need different mounting methods and prep.
  • Whether the door needs adjustment or repair, such as a sagging hinge, damaged frame or failing closer, before the bar will work properly.
  • Exterior trim and keying choices, including key cylinders, lever trim, or integration with an existing keying system.
  • Single door versus a pair of doors, and how many openings are involved in one visit.
  • Finish and environment, because coastal or marina exposure may call for more corrosion-resistant materials, and after-hours or urgent calls can affect scheduling.

Why Redondo Beach chooses us

  • Fully mobile and available 24/7, so we can come to a business after closing time when a door can be worked on without disrupting customers.
  • In business since 1987, with owner and lead technician David Shar involved in the work.
  • We look at the whole door, not just the bar, because most exit device complaints trace back to alignment, frame or closer issues.
  • We explain options and tradeoffs honestly, including when a repair makes more sense than replacement.
  • Familiarity with salt-air wear on hardware, which matters for businesses near the pier, harbor and Pacific Coast Hwy.
  • We also handle related commercial lock work such as rekeying, deadbolts and gate or storage padlocks, so one call can cover more than the exit door.

Panic Bar Installation across Redondo Beach

Redondo Beach splits naturally into South Redondo (90277) and North Redondo (90278), and the commercial needs differ between them. Around the Redondo Beach Pier and International Boardwalk, King Harbor Marina and Seaside Lagoon, restaurants, bars and visitor-oriented businesses depend on rear and side exits that get heavy daily use, with salt air working on every hinge and latch. In Riviera Village and along Pacific Coast Hwy, shops and small offices often have back doors that open onto alleys or service areas and need a reliable, easy exit that still locks securely overnight.

North Redondo has its own mix. Along Artesia Blvd, Aviation Blvd, Torrance Blvd and Inglewood Ave, you will find retail strips, offices, medical suites and service businesses near neighborhoods such as El Nido, Golden Hills and The Avenues. HOA-managed townhome communities there may also have common rooms, clubhouses, garages or utility doors where exit hardware is relevant. We can look at these doors and advise on a fitting device.

Whether you manage a storefront in 90277 or an office in 90278, we come to you. Call (323) 997-8867 any time, day or night, and we will talk through the door and what it needs. If a marina or storage-area lock is part of the same visit, we can often look at that too.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Redondo Beach locksmith services

See all of our Redondo Beach services, or our citywide panic bar installation page.

Panic Bar Installation in Redondo Beach — FAQs

What is a panic bar and when do I need one?
A panic bar, also called an exit device, is a push-style latch bar that lets people leave quickly without turning a knob or using a key. Many commercial and assembly spaces use them on exit doors. Requirements depend on your occupancy, so confirm with the local fire or building authority, then call us at (323) 997-8867 to install the hardware.
Do you install panic bars on both single and double doors?
Yes. Single doors usually take a rim device, while pairs of doors may use vertical rod devices or other configurations. We look at the actual doors and frames to recommend the right setup.
Can you repair my existing panic bar instead of replacing it?
Often, yes. Sticking bars, worn latches, loose mounting and misaligned strikes can usually be repaired. If the device is too worn or the door itself is the real issue, we explain that honestly. Call (323) 997-8867 to describe the problem.
Does salt air near the pier and harbor affect exit hardware?
It does. Coastal moisture and salt can corrode finishes, springs and fasteners, causing sticking or failure over time. For sites near the Redondo Beach Pier or King Harbor, we pay attention to durable finishes and recommend periodic checks.
Can you come after business hours?
Yes. We are mobile and available 24/7, so we can often work on exit doors after closing. Call (323) 997-8867 to discuss scheduling that suits your business.
Can the outside of the door still be locked with a panic bar?
Yes, in many setups. The inside bar always allows exit, while the outside can use a key cylinder, a lever trim, or no outside access at all. We help you choose based on how staff and customers use the door.
Do you handle fire-rated doors?
Fire-rated openings have specific hardware needs, and the device and door must be compatible. Tell us about the door when you call (323) 997-8867, and we will go over what applies to it. Your local fire authority can confirm code requirements.
Do you have a shop I can visit?
No. Crenshaw Lock Company is fully mobile with no storefront. We bring the work to your Redondo Beach location.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7