Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Pico Rivera · 24/7 mobile

Access Control Installation in Pico Rivera, CA

Crenshaw Lock Company installs keypad, card and fob access-control systems for business entrances in Pico Rivera, California. We are a fully mobile locksmith available 24/7, and we come to your door. Call (323) 997-8867 to describe your entrance and plan the right system.

  • Mobile to your Pico Rivera location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

A metal key works fine until the day it doesn't. An employee leaves and never returns a copy, a tenant changes, or a cylinder gets chewed up by years of daily use. Access control solves this by letting you decide who can enter, and removing a person's access takes a few moments instead of a re-keying. For Pico Rivera businesses, from strip-mall tenants to light-industrial shops, that control is practical rather than fancy.

We install three common styles of entry control: keypad systems where each person has a code, card readers that use a proximity credential, and key fobs that work like a small tag you wave near a reader. Which one suits you depends on how many people come through, how often staff changes, and what your door and frame are made of. We will talk through those tradeoffs plainly and will not push a more complicated system than you need.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar built the business on mobile service. We have no storefront. We bring the tools and hardware to your location, assess the door in person, and install on site so you can see how everything works before we leave.

How it works in Pico Rivera

  1. 1

    Talk through your entrance

    Call (323) 997-8867 and tell us about the door: glass storefront, steel back door, or a gate. Tell us how many people need access and whether you want codes, cards, fobs, or a mix. This conversation shapes the whole job.

  2. 2

    On-site door assessment

    We come to your location and look at the door, frame, hinges, and existing hardware. Aluminum storefront doors, common along Whittier and Washington Blvds, have narrow stiles that limit which hardware fits, so we check this before recommending anything.

  3. 3

    Choose the hardware and power approach

    We explain options such as a keypad lockset, an electric strike, or a magnetic lock paired with a reader. We also cover how the system gets power and what happens to the door if power drops, so you understand the safety and security tradeoffs.

  4. 4

    Installation and wiring

    We mount the reader or keypad, prepare the door and frame, run the needed connections, and secure everything so it is tidy and tamper-resistant. We work to keep the door operating normally throughout the job.

  5. 5

    Programming and credentials

    We set up codes, cards, or fobs for the people you name. We make sure each credential works, and that you know how to add or remove users when your team changes.

  6. 6

    Walkthrough and handoff

    Before we leave, we go through daily use with you: how to unlock, how to reset a code, and what to do if a credential is lost. You leave knowing how to run your own system.

Need access control in Pico Rivera?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of system: standalone keypad, card reader, fob reader, or a combination of methods all involve different hardware and setup.
  • The number of doors and users, since more entrances and more credentials mean more equipment and programming time.
  • Door and frame construction, including whether the door is aluminum storefront, hollow metal, wood, or glass, which affects how hard it is to prepare.
  • Wiring and power needs, such as whether power is already near the door or must be routed to it.
  • Locking method, such as an electric strike versus a magnetic lock, and any code-required exit hardware.
  • Removal or rework of existing locks, and whether current hardware can be reused or must be replaced.

Why Pico Rivera chooses us

  • Fully mobile service: we work at your door in Pico Rivera and have no storefront, so there is nothing for you to drive to.
  • Open 24/7, so urgent security needs after a break-in or staff dispute can be addressed outside business hours.
  • In business since 1987, which means decades of hands-on experience with the doors and locks found in older Southern California commercial buildings.
  • Owner involvement: David Shar leads the work, so the person advising you is accountable for the result.
  • We install what fits your door and your needs, and we explain tradeoffs rather than defaulting to the most complicated system.
  • We teach you to manage users yourself so you are not dependent on us for every code change.

Access Control across Pico Rivera

Pico Rivera's commercial mix is varied. Along Whittier Blvd, Washington Blvd, and Rosemead Blvd, you find aluminum-storefront shops and strip-mall suites, where doors tend to be narrow-stile glass with a lock that takes a lot of daily abuse. In the Towne Center area, larger retail operations often need controlled back-of-house and stockroom doors. Near the I-605 and San Gabriel River corridor, light-industrial buildings have rear and warehouse doors where a keypad or fob reader can replace a ring of shared keys.

We serve all of Pico Rivera, including the Pico and Rivera districts and North Pico Rivera, across ZIP codes 90660, 90661, and 90662. A business owner in 90660 near Whittier Blvd, a tenant in 90661, or a shop in 90662 gets the same on-site assessment. Event-driven venues, such as those around the Pico Rivera Sports Arena, may also want controlled access for staff or vendor doors, and we can discuss what fits.

Because we are mobile, getting to you means using I-5, I-605, and the main boulevards rather than operating from a local shop. Whether your business is near Smith Park, Streamland Park, or the edge of the Whittier Narrows Recreation Area, call (323) 997-8867 and we will plan the visit around your door.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Pico Rivera locksmith services

See all of our Pico Rivera services, or our citywide access control page.

Access Control in Pico Rivera — FAQs

What kinds of access control do you install for Pico Rivera businesses?
We install keypad, card, and fob systems for business entrances. We can also combine methods, such as a keypad for staff and a fob for management. Call (323) 997-8867 to talk through which fits your door.
Will access control work on an aluminum storefront door?
Often yes, but narrow stiles limit hardware choices. Many shops along Whittier and Washington Blvds have this style of door. We inspect it in person first and recommend hardware that fits.
Do I need a storefront visit to get started?
No. We are fully mobile with no storefront. We come to your business, assess the door, and install on site.
Can you install outside normal business hours?
We are available 24/7. If you need a security change urgently, call (323) 997-8867 and we will discuss scheduling.
What happens if a former employee still has a key or code?
With keypad, card, or fob systems you can remove or change that person's access without re-keying every lock. We show you how to manage users yourself after installation.
What happens to the door if the power goes out?
It depends on the lock type. We explain how the system behaves during power loss and the safety and security tradeoffs before installing, so there are no surprises.
How is the price determined?
Cost depends on the system type, number of doors and users, door construction, wiring needs, and locking method. We give guidance after seeing the door, and you can start by calling (323) 997-8867.
Do you also help with broken keys or lock changes at businesses?
Yes. As a mobile locksmith we handle commercial lock work such as broken-key extraction and cylinder replacement, and we can pair that with an access-control upgrade if you want one.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7