Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Panorama City · 24/7 mobile

Commercial Door Hardware in Panorama City, CA

Crenshaw Lock Company repairs and replaces commercial door hardware in Panorama City, including storefront, aluminum-frame and mortise hardware. We are fully mobile and available 24/7, so we come to your business whenever a door fails or is damaged. Call (323) 997-8867 to talk with a technician.

  • Mobile to your Panorama City location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door is hardware that gets used hundreds of times a day, and in Panorama City that is especially true. Between the retail traffic around the Panorama Mall district, the shops at The Plant, and the long run of storefronts along the Van Nuys Boulevard corridor, doors here open and close from early morning until late night. Latches wear, closers drift, strikes loosen, and cylinders start to bind. When that happens, a business is either stuck unable to lock up or stuck unable to open.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. We are a fully mobile operation. There is no storefront to visit; we bring the tools and hardware knowledge to your door, day or night, and handle the repair on site wherever possible.

Our commercial door hardware work covers storefront doors, aluminum-frame doors with narrow stiles, and heavier mortise lock sets. That includes repairing worn or broken locks, replacing push bars and pull handles, adjusting alignment problems, rekeying after a break-in attempt or staff turnover, and swapping out hardware that has simply reached the end of its life. Whether you manage a small shop or a multi-tenant property, we aim to get the door secure and working properly again.

How it works in Panorama City

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us the type of door (glass storefront, aluminum frame, or solid with a mortise lock), what the hardware is doing, and whether the door can currently be secured. That helps us bring the right parts.

  2. 2

    On-site inspection

    We come to your location and examine the lock, latch, strike, closer, hinges, and frame. On aluminum storefronts, misalignment or a sagging door is often the real cause of a lock that seems broken, so we check both.

  3. 3

    Repair or replace recommendation

    We explain whether the existing hardware can be repaired, adjusted, or rekeyed, or whether replacement makes more sense. You get a clear explanation of the options before work begins, with no pressure.

  4. 4

    Hardware work and fitting

    We service or install the hardware, whether that is a mortise lock body, a storefront deadlatch, a cylinder, a push-pull set, or an exit device component, and fit it carefully to the door and frame so it operates smoothly.

  5. 5

    Rekey and key control

    If keys have been lost, an employee has left, or there was an attempted forced entry, we can rekey the cylinders so old keys no longer work, and set up new keys for the people who need them.

  6. 6

    Test and secure the door

    Before we leave, we cycle the door repeatedly, check latching and locking from both sides, and confirm it closes and secures correctly so you can lock up with confidence.

Need commercial door hardware in Panorama City?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door and frame: narrow-stile aluminum storefront, wood, hollow metal, and mortise-prepared doors each call for different hardware.
  • Whether the hardware can be repaired or rekeyed, or has to be fully replaced.
  • The grade and brand of the hardware you choose, from standard commercial sets to heavier-duty options.
  • The number of doors and cylinders involved in a single visit, including rekeying several at once.
  • Damage from forced entry, which may involve repairing the door, frame, or strike area in addition to the lock.
  • The time and circumstances of the call, since after-hours emergency service differs from a scheduled daytime visit.

Why Panorama City chooses us

  • Fully mobile service: we work at your door, so there is no waiting to drop off hardware or visit a shop.
  • Available 24/7, which matters when a storefront cannot be locked after an attempted break-in.
  • Experience since 1987 with a wide range of commercial hardware, including older mortise sets still found in mid-century buildings.
  • Owner involvement: David Shar leads the business, so standards for workmanship come from the top.
  • We diagnose the whole door, not just the lock, because alignment and closer problems often masquerade as lock failure.
  • Clear explanations of repair versus replacement, so you only pay for what the door actually needs.

Commercial Door Hardware across Panorama City

Panorama City was laid out beginning in 1948 by Fritz B. Burns and Henry J. Kaiser as the San Fernando Valley's first large planned postwar community, and its commercial life has grown up around that grid. In the Panorama Mall district, retail tenants and surrounding businesses rely on glass and aluminum storefront doors that see heavy daily use. Along the Van Nuys Boulevard corridor, small shops, offices, and service businesses depend on storefront locks and closers that wear quickly with constant traffic.

The Plant, built on the former General Motors Van Nuys assembly plant site, brings larger retail and tenant doors into the mix, where a failing latch or a lock damaged in an attempted forced entry can leave a unit exposed. We also serve businesses near Kaiser Permanente Panorama City Medical Center and Mission Community Hospital, where offices, clinics, and suppliers need reliable, secure doors. From Roscoe Boulevard to Nordhoff Street and Woodman Avenue, we travel to wherever the problem is in ZIP code 91402.

Because many buildings here mix commercial frontage with dense apartment housing above or beside it, we often see properties where one visit covers a storefront door, a rear service door, and a security gate. If you manage a property like that, mention it when you call at (323) 997-8867 and we will plan the visit accordingly.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Panorama City locksmith services

See all of our Panorama City services, or our citywide commercial door hardware page.

Commercial Door Hardware in Panorama City — FAQs

What kinds of commercial door hardware do you repair in Panorama City?
We work on storefront doors, aluminum-frame doors, and mortise lock sets, including latches, cylinders, strikes, push-pull hardware, and related components. Call (323) 997-8867 and describe your door so we can prepare.
Can you come out after hours or overnight?
Yes. We are available 24/7 and fully mobile, so we can travel to your business whenever a door will not lock or open properly.
My storefront was damaged in an attempted break-in. What should I do?
Call us at (323) 997-8867. We can assess the lock, strike, and door, repair or replace damaged hardware, and rekey so any compromised keys no longer work.
Do you rekey commercial locks instead of replacing them?
Often, yes. If the hardware is in good condition, rekeying changes the key without replacing the lock. If it is worn or damaged, we will explain when replacement is the better choice.
Why does my aluminum storefront door not latch even though the lock is new?
Alignment is a common cause. A sagging door, worn hinges, or a closer out of adjustment can keep the latch from meeting the strike. We check the entire door, not just the lock.
Do you have a shop I can visit?
No. Crenshaw Lock Company is entirely mobile. We come to your Panorama City location, so there is no storefront to visit.
Can you handle several doors in one visit?
Yes. Property managers and businesses with multiple doors can have several locks repaired, replaced, or rekeyed in a single visit. Call (323) 997-8867 to plan it.
How is the price of commercial hardware work determined?
It depends on door type, hardware grade, whether repair or replacement is needed, the number of doors, and any damage involved. We explain the factors and options before starting work.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7