Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Oxnard · 24/7 mobile

Commercial Door Hardware in Oxnard, California

Crenshaw Lock Company repairs and replaces commercial door hardware in Oxnard, California, including storefront, aluminum-frame and mortise hardware. We are fully mobile and available 24/7, coming to your business wherever it is. For a broken closer, failed exit device or sticking lock, call (323) 997-8867.

  • Mobile to your Oxnard location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door is the part of your building that gets used the most and forgiven the least. Hundreds of pushes, pulls and slams every week wear down latches, closers, hinges and strikes, and then one morning the door will not lock, will not latch, or will not open. In Oxnard, that wear is made worse by salt air near the coast, dust and heavy traffic in the agricultural and industrial areas, and the constant turnover of tenants in older buildings.

Crenshaw Lock Company has been serving Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar and the team handle commercial hardware as a regular part of the work. We repair and replace storefront hardware, narrow-stile aluminum-frame door locks and pull handles, mortise lock bodies and cylinders, panic and exit devices, closers, hinges, and strike plates. Where a repair makes sense, we repair. Where parts are worn past the point of being trustworthy, we say so and replace them.

We are a fully mobile service with no storefront to visit. Our work happens at your door, whether that is a retail unit near The Collection at RiverPark, a harbor business, or a warehouse off Rice Avenue. That means you do not have to leave your property unsecured while you sort it out, and day or night you can call (323) 997-8867.

How it works in Oxnard

  1. 1

    Describe the problem by phone

    Tell us what the door is doing: not latching, key will not turn, closer slamming, handle loose, or lock damaged after a break-in attempt. Also tell us the door type, such as glass storefront, aluminum frame, or wood or metal with a mortise lock. That helps us bring the right parts.

  2. 2

    Inspect the whole door, not just the lock

    Many hardware failures are really alignment problems. We check the hinges, the closer, the strike, the frame and how the door hangs before deciding what is actually at fault. A latch that misses its strike is often a sagging door, not a bad lock.

  3. 3

    Explain repair versus replacement

    We tell you what we found and your options in plain terms. Some hardware can be adjusted, rebuilt or re-cylindered. Other parts, like a corroded mortise body or a cracked exit device, should simply be replaced. The decision is yours.

  4. 4

    Complete the work on site

    We install or repair the hardware at your location, matching the door's function, whether that is storefront with a thumb-turn, a keyed entry, or an exit device that must always allow free egress. We keep egress and fire-code needs in mind when choosing parts.

  5. 5

    Test, key and hand over

    We cycle the door repeatedly, check closing speed and latching, and confirm keys work smoothly. If you want keys reorganized or rekeyed at the same time, we can do that during the same visit.

Need commercial door hardware in Oxnard?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door: glass storefront, narrow-stile aluminum, and mortise-prepped doors each need different hardware and different labor.
  • Whether the hardware can be repaired or must be fully replaced, and the grade of replacement you choose.
  • The type of device involved, such as a standard lockset, a mortise lock, a panic or exit device, or a heavy-duty closer.
  • Whether the frame, strike or hinges are damaged or corroded and also need work, which is common near the coast.
  • How many doors are involved and whether keying, rekeying or master-key coordination is part of the job.
  • Time of day and urgency, since after-hours emergency calls are handled differently than scheduled work.

Why Oxnard chooses us

  • Fully mobile service, so repairs happen at your business with no need to move equipment or leave doors unsecured.
  • Serving the region since 1987, with experience across storefront, aluminum-frame and mortise hardware.
  • 24/7 availability for situations like a door that will not lock after hours or damage following a break-in.
  • We diagnose the whole door assembly, so you are not sold a new lock when the real problem is a closer or hinge.
  • Honest repair-or-replace guidance, with the reasoning explained before work begins.
  • Familiarity with local conditions, including salt-air corrosion near the harbor and beaches and heavy use in industrial and rental-heavy areas.

Commercial Door Hardware across Oxnard

Oxnard's businesses do not all face the same conditions. Along Channel Islands Boulevard and around Channel Islands Harbor, salt air attacks hinges, strikes and lock bodies, leaving pitted finishes and stiff, seizing mechanisms. Businesses closer to Oxnard Shores and Hollywood Beach often find that hardware that was fine a few years ago now sticks or fails to latch, and replacing corroded parts early is cheaper than waiting for a lockout.

Inland, the picture changes. Retail and office tenants around The Collection at RiverPark in ZIP 93036 tend to have aluminum-frame storefronts, where narrow-stile locks and pull handles take daily abuse. Near Heritage Square, the Carnegie Art Museum and the older downtown blocks and La Colonia, commercial spaces often sit beside rental-heavy multifamily buildings, and hardware there sees frequent changes in occupants and keys.

In the agricultural and industrial areas along Rice Avenue, Rose Avenue, Wooley Road and Vineyard Avenue (SR-232), packing houses and warehouses rely on heavy-duty hardware and padlocks, and dust and constant use wear things quickly. We serve ZIP codes 93030, 93033, 93035 and 93036, with easy access from US-101 and Oxnard Boulevard. Call (323) 997-8867 any hour.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Oxnard locksmith services

See all of our Oxnard services, or our citywide commercial door hardware page.

Commercial Door Hardware in Oxnard — FAQs

Can you repair commercial door hardware at night or on weekends in Oxnard?
Yes. We are available 24/7 and fully mobile, so call (323) 997-8867 and we will come to your business. This is useful when a door will not lock after closing or has been damaged.
Do you work on aluminum storefront doors?
Yes. We repair and replace hardware on aluminum-frame and glass storefront doors, including narrow-stile locks, pull handles, closers and strikes.
Can salt air really ruin door hardware?
It can. Near Channel Islands Harbor, Oxnard Shores and Hollywood Beach, salt corrodes hinges, latches and keyways, causing sticking and eventual failure. Replacing affected parts before they seize avoids emergency lockouts.
Should I repair or replace my mortise lock?
It depends on its condition. A worn cylinder or loose trim can often be fixed, but a corroded or broken mortise body usually should be replaced. We will explain what we find so you can decide.
Can you replace a broken closer or exit device?
Yes. We handle door closers and panic or exit devices, and we keep free egress requirements in mind when selecting and installing them.
Do you handle warehouse and packing house hardware?
Yes. We work on heavy-duty hardware and padlock replacement for agricultural and industrial buildings, and can coordinate keying across multiple doors. Call (323) 997-8867 to discuss your site.
Do I need to come to a shop?
No. We are mobile only and have no storefront. We bring tools and parts to your location in Oxnard.
How is the cost of commercial hardware work determined?
It depends on door type, whether we repair or replace, the device involved, any frame or hinge damage, the number of doors, and urgency. We explain the factors before starting.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7