Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Moorpark · 24/7 mobile

Panic Bar Installation in Moorpark, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware in Moorpark, California. We are fully mobile and available 24/7, coming to your building with the tools to get a door safe and compliant. Call (323) 997-8867 to talk through your door and hardware.

  • Mobile to your Moorpark location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar has one job that matters more than any other: when someone pushes on it in an emergency, the door opens, every time. That sounds simple until you look at the doors in a real building. A rear exit at a Moorpark business park, a classroom or office wing near Moorpark College, a storage room on a farm property, or a hundred-year-old brick storefront on High Street each asks for a different kind of device, mounted a different way.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar has spent decades around commercial doors. We are a mobile-only service, so there is no showroom to visit. We come to the door, look at how it is built and how people actually use it, and install or repair the exit hardware on site, any hour of the day or night.

People usually call us for one of a few reasons: a new tenant space that needs an exit device on its egress door, a worn or sticking panic bar that no longer latches or releases cleanly, an after-hours break-in that damaged the hardware, or an inspection note that says an exit door needs attention. Whichever it is, we start by understanding the door and the occupancy rather than selling a standard package.

How it works in Moorpark

  1. 1

    Talk through the door and the building

    Call (323) 997-8867 and tell us what the door is, what type of building it is, and what is going wrong or what you need. Describing the door material, whether it is a single or double door, and how it is used helps us arrive with suitable hardware and parts.

  2. 2

    Inspect the door, frame and existing hardware

    On site we check the door's material, thickness, condition and alignment, the frame, and any hardware already in place. A panic bar is only as reliable as the door it is mounted on, so a sagging door or a bent frame gets noted before anything is drilled.

  3. 3

    Select the right exit device

    We match the device to the door: rim-style, mortise-style, or vertical rod arrangements for double doors, with the trim and exterior function the situation calls for. We discuss whether the door should stay locked from outside, allow entry by key, or be exit-only, and we talk about fire-rated openings where they apply.

  4. 4

    Install and align the hardware

    We mount the device, set the strike, and adjust the latch so it engages firmly and releases with a normal push. On older wood or steel doors we reinforce or prepare the mounting area as needed so the hardware holds up over years of use.

  5. 5

    Test the release and the exterior function

    We operate the device repeatedly, check that the door closes and latches on its own, and confirm that any outside trim or key cylinder works as intended. You see the operation yourself so you know how it should feel.

  6. 6

    Review upkeep and next steps

    We explain simple checks you can do, such as listening for a sticky latch or watching for a door that no longer closes fully, and we can repair or rekey related hardware on the same visit if it is needed.

Need panic bar installation in Moorpark?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of exit device: a basic rim-style bar differs from a mortise or concealed vertical rod device in parts and installation effort.
  • Single versus double doors, since double doors may require more hardware and more careful alignment of the pair.
  • Condition of the existing door and frame, including whether repairs, reinforcement or new strike preparation are needed first.
  • Whether the opening is fire-rated or has specific requirements that limit which devices and modifications can be used.
  • Exterior trim and keying choices, such as key-controlled entry, exit-only, or integration with an existing keyed system.
  • Time of day and urgency, since after-hours or emergency calls involve different scheduling than planned installations.

Why Moorpark chooses us

  • Fully mobile service: we work at your door instead of asking you to bring anything anywhere, which matters for a door that cannot be left unsecured.
  • In business since 1987, with owner David Shar leading the work and bringing long experience with commercial and older buildings alike.
  • Available 24/7, so a damaged exit door after a break-in or a failed device before opening day can be addressed outside regular business hours.
  • Comfortable with both modern commercial doors and older construction, including historic wood and brick buildings where mounting needs extra care.
  • Honest recommendations: if a door needs adjustment or repair rather than new hardware, we say so instead of replacing something that works.
  • We can handle related hardware on the same visit, including rekeying, door closers' basic adjustments where appropriate, and entry hardware for the same opening.

Panic Bar Installation across Moorpark

Moorpark's commercial doors are a mix of eras. Along High Street in Old Town Moorpark, early-20th-century brick and wood buildings sit near the High Street Arts Center, and some still carry original mortise locks. Adding a panic bar to a door like that is a careful job: we consider how the old wood or frame will hold the hardware and how to do it without ruining the character of the entrance. ZIP code 93021 covers much of this area, and a shop or gathering space there often needs a dependable exit device installed with minimal visible change.

Out toward Campus Park and the Moorpark College area, along Collins Drive's neighbors and off Princeton Ave, you find institutional and office-style buildings where egress doors take heavy daily use. The same goes for businesses near the Moorpark Metrolink Station and along Spring Rd and Tierra Rejada Rd, where rear exits and storage doors need hardware that releases reliably. Busy doors wear out latches and springs, and we repair or replace those parts so the door still closes and the bar still releases smoothly.

The agricultural edge of the city along Los Angeles Ave, near Underwood Family Farms, brings its own needs: barns, packing areas and equipment buildings with exit doors that face dust, weather and rough handling. Residents of Peach Hill and Mountain Meadows, mostly in ZIP 93021 and 93020, sometimes call us for home-based business spaces or detached structures as well. With SR-118 and SR-23 connecting the city, we cover Moorpark day or night. Call (323) 997-8867 to schedule a visit.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Moorpark locksmith services

See all of our Moorpark services, or our citywide panic bar installation page.

Panic Bar Installation in Moorpark — FAQs

What is a panic bar and when is one required?
A panic bar, also called an exit device, is a push-style latch that lets people leave quickly without a key or twisting a knob. Requirements depend on the building's use and occupancy, so check with your local building or fire authority. We can install the hardware once you know what your door needs, and you can call (323) 997-8867 to discuss it.
Can you install a panic bar on an older High Street building?
Often yes. Older wood or brick buildings need attention to how the door and frame will carry the hardware, and we plan the mounting to protect the building's original features where we can. We look at the door first and tell you plainly what is practical.
Do you come to me, or do I need to visit a shop?
We are mobile only and have no storefront. We come to your Moorpark location, whether that is a business, a school-area office, or a farm building, and do the work on site.
Can you repair a panic bar that sticks or will not latch?
Yes. Sticking is often caused by door sag, a misaligned strike, or worn internal parts. We diagnose the cause and repair or replace what is needed. Call (323) 997-8867 and describe what the door is doing.
Can the outside of the door still be locked with a key?
In many setups, yes. Exit devices can be paired with outside trim or a key cylinder so the door is secure from outside while still opening freely from inside. We help you choose the arrangement that fits how the door is used.
Do you handle double doors?
Yes. Double doors usually require matching hardware and careful alignment so both leaves close and latch properly, and we set them up and test them together.
Are you available after hours if an exit door is damaged?
Yes, we are available 24/7. If a break-in or accident has damaged an exit door and left the building unsecured, call (323) 997-8867 and we will work out the next step with you.
How is the cost of installation decided?
It depends on the type of device, whether the doors are single or double, the condition of the door and frame, any fire-rating requirements, keying choices, and timing. After hearing about your door we can explain what applies to your situation.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7