Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Long Beach · 24/7 mobile

Access Control Installation in Long Beach, CA

Crenshaw Lock Company installs keypad, card and fob access-control systems for business entrances in Long Beach, California. We are a 24/7, fully mobile locksmith, so we come to your door with no storefront visit needed. Call (323) 997-8867 to talk through your building and your access needs.

  • Mobile to your Long Beach location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

Access control replaces the question of who has a key with the question of who should be allowed in, and when. For a Long Beach business, that can mean a keypad on a back-of-house door, card readers on an office suite, or fobs for a shared entrance that dozens of people use. Done well, it lets you add or remove a person in minutes instead of rekeying a building.

Long Beach is a varied city, and the right system depends on where your door is. A shop in Belmont Shore, a medical office in Bixby Knolls, a warehouse on the industrial west side near the Port and a ground-floor suite in a Downtown Long Beach tower all face different conditions: salt air, foot traffic, older door frames, shared entrances and landlord or HOA rules. We look at the actual door before recommending hardware.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. We are fully mobile, available around the clock, and we install keypad, card and fob systems at the business site. We try to explain options plainly, including when a simpler solution will serve you better than a more elaborate one.

How it works in Long Beach

  1. 1

    Talk through the entrance and who uses it

    We start with a call to (323) 997-8867. Tell us which doors need control, roughly how many people come and go, and whether you need to track entries or only restrict them. That tells us whether a standalone keypad or a card or fob system makes more sense.

  2. 2

    Inspect the door, frame and power options

    We come to your location and examine the door material, frame, existing lockset, and how power could reach the device. Glass storefronts, metal industrial doors and older wood doors each need a different approach, and exposure to coastal air matters for hardware near the water.

  3. 3

    Recommend a system that fits the building

    We explain the realistic options: keypad for small teams, credentials for larger groups, and electric strikes or electrified locks depending on the door. If you lease, we point out what to confirm with your landlord or property manager, especially in shared or HOA-managed buildings.

  4. 4

    Install and wire the hardware

    We mount the reader or keypad, set up the locking hardware and connect the power and control components. We aim to keep the door working properly and securely, including its fire-egress behavior, which should never be compromised by an access upgrade.

  5. 5

    Program users and test every credential

    We set up codes, cards or fobs, test each one, and confirm that the door locks and releases as expected from both sides. We also check the door closes fully and latches reliably, since even good electronics cannot secure a door that does not shut.

  6. 6

    Walk you through managing access

    Before we leave, we show you how to add, change or remove users and what to do when someone loses a card or an employee leaves. You should be able to run the system without needing us for routine changes.

Need access control in Long Beach?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • How many doors need access control, since each additional entrance adds hardware, wiring and programming time.
  • The type of system chosen: a standalone keypad is a different scope than networked card or fob readers with user management.
  • Door and frame condition and material, as glass, steel, aluminum storefront or older wood doors may require different locking hardware or modifications.
  • Power and wiring requirements, including how easily power can reach the door and whether a new run is needed.
  • Environmental exposure, such as marine-grade or weather-resistant hardware for doors near the coast and in salt air.
  • Whether existing hardware can be reused or must be replaced, and the number of credentials or fobs you need issued.

Why Long Beach chooses us

  • Fully mobile service: we work at your business door, not from a shop, so recommendations are based on what we actually see.
  • In business since 1987, with owner and lead tech David Shar bringing long experience with commercial doors of every age.
  • 24/7 availability, useful when a system failure or a security concern cannot wait for business hours.
  • We start from your real needs and will tell you when a simple keypad is enough instead of steering you toward a bigger system.
  • We pay attention to life-safety basics, making sure egress and door closing still work properly after installation.
  • Familiarity with Long Beach conditions, from salt air near the shore to older buildings and shared downtown entrances.

Access Control across Long Beach

Long Beach stretches from the Port and the industrial west side to the shoreline and the residential neighborhoods inland, and its businesses reflect that range. In Downtown Long Beach (ZIP 90802 and 90813), offices, restaurants and converted lofts along Ocean Blvd often share entrances and deal with property-management or HOA rules, so we coordinate access changes with what the building allows. Near the Long Beach Convention & Entertainment Center, Shoreline Village and The Pike Outlets, heavy foot traffic makes controlled back-of-house and staff doors especially worthwhile.

Further east, Belmont Shore and Naples (ZIP 90803) sit close enough to salt air that outdoor keypads and readers need to hold up to corrosion, and we favor weather-resistant hardware for exposed doors. In Bixby Knolls, California Heights and Belmont Heights (ZIP 90807, 90806 and 90815), small offices, clinics and shops often occupy older buildings where door frames and hardware predate electronic access, so we inspect carefully before deciding what can be retrofitted.

Crenshaw Lock Company reaches these areas via I-710, I-405, SR-1 (PCH) and Atlantic Ave, whether your business is near CSULB, Wrigley, Alamitos Beach or the industrial blocks near the Port. We are mobile and available 24/7 at (323) 997-8867, so you can call when it suits your schedule and we will come to you.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Long Beach locksmith services

See all of our Long Beach services, or our citywide access control page.

Access Control in Long Beach — FAQs

What kinds of access control systems do you install for Long Beach businesses?
We install keypad, card and fob systems for business entrances. A keypad suits small teams, while cards or fobs make sense when many people need access or you want to deactivate one person without changing everyone else. Call (323) 997-8867 to discuss your door.
Do I need to visit a shop to arrange this?
No. Crenshaw Lock Company is fully mobile with no storefront. We come to your business in Long Beach, look at the door in person and recommend a system based on what we see.
Can access control be added to an older building?
Often yes, but it depends on the door, frame and how power can reach the device. Older buildings in areas like Bixby Knolls or Belmont Heights may need some adaptation, so we inspect first and explain what is practical.
Will salt air near Belmont Shore or Naples damage the hardware?
Coastal air is hard on exposed metal and electronics. For doors near the water, we recommend weather-resistant hardware and sensible placement. No outdoor device is maintenance-free, but better choices last longer.
Does access control affect fire exits?
It must not. Doors still need to allow safe exit, and we design installations so egress works correctly. If your door falls under specific code requirements, check with your building or fire authority as well.
What happens if an employee leaves or loses a card?
With a card or fob system, you can disable that credential without rekeying the door. With a keypad, you change the code. We show you how to do this when we finish the install, and you can call (323) 997-8867 if you need help.
Can you work in a shared or managed building downtown?
Yes, though shared entrances usually require approval from the landlord, property manager or HOA. We recommend confirming that before work begins and can help you describe what is being installed.
Are you available outside business hours?
Yes, we are available 24/7. If an access system fails or a door will not secure, call (323) 997-8867 and we will help sort out the next step.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7