Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Access Control in Lomita · 24/7 mobile

Access Control Installation in Lomita, California

Crenshaw Lock Company installs keypad, card and fob access control systems for business entrances in Lomita, California. We are a fully mobile locksmith available 24/7, and we come to your door. To talk through your entrance, call (323) 997-8867.

  • Mobile to your Lomita location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keycard held to an access control reader beside an office door
Open now(323) 997-8867

Lomita is a small city, about 1.9 square miles, but its commercial life is concentrated and busy. Shops, offices, clinics and service businesses line Pacific Coast Highway, Narbonne Avenue and Lomita Boulevard, and many of them still run on a single metal key that has been copied more times than anyone can count. When an employee leaves, a key goes missing, or a vendor needs after-hours access, the only real fix is to change the locks. Access control replaces that cycle with credentials you can issue and cancel.

An access control system lets you decide who can open a door, and in many setups when. A keypad uses a code, a card system uses a proximity or swipe credential, and a fob works like a small keychain version of the same idea. Lost credentials can be deactivated without rekeying the whole building. For a small business with a back office, a stockroom, or a shared suite, that control is often worth more than the hardware itself.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, under owner and lead technician David Shar. We are mobile only, with no storefront to visit. We come to your Lomita location, look at the actual door, frame and power situation, and recommend a system that fits the way your business operates rather than the most elaborate option on a shelf.

How it works in Lomita

  1. 1

    Talk through who needs access

    We start with a call to (323) 997-8867 and a few questions. How many doors, how many people, and do some staff need different access than others? Do you have vendors, cleaners or tenants who come and go after hours? This shapes whether a simple keypad is enough or whether cards and fobs make more sense.

  2. 2

    On-site door and frame assessment

    Because we are fully mobile, we come to your entrance and inspect it in person. We look at the door material, the frame, existing hardware, how the door closes, and where power can reasonably be run. Older Lomita storefronts and 1960s-80s buildings often have quirks that only show up in person.

  3. 3

    Choosing the right lock and reader type

    We explain the options plainly: electric strikes, electrified locksets, or magnetic locks where appropriate, paired with a keypad, card reader or fob reader. We also consider life-safety needs, since a business door must still allow safe exit. You decide before any work begins.

  4. 4

    Installation and wiring

    We mount the reader and lock hardware, make any needed door or frame preparations, and connect power and control wiring. We aim to keep the door looking clean and working smoothly, and we make sure the door still latches reliably and exits properly.

  5. 5

    Programming credentials

    We set up codes, cards or fobs for the people you name, and test each one. If you want different access for managers and staff, we configure that during this step so it works from day one.

  6. 6

    Walkthrough and handoff

    Before we leave, we show you how to add or remove credentials, what to do if someone loses a card, and what to check if a door misbehaves. You leave knowing how your system works, not just that it was installed.

Need access control in Lomita?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The number of doors being controlled, since each entrance needs its own lock hardware, reader and wiring.
  • The type of system chosen: a standalone keypad is a different scope than a networked card or fob setup with many users.
  • Door and frame condition, including whether a metal, wood or glass door needs preparation or reinforcement before hardware can be mounted.
  • Wiring and power requirements, such as how far the reader sits from a power source and how difficult the route is in an older building.
  • Lock type, such as an electric strike versus an electrified lockset or magnetic lock, and any life-safety exit requirements.
  • The number of cards or fobs needed and whether you want features like scheduled access or different permission levels.

Why Lomita chooses us

  • Fully mobile service: we bring the work to your Lomita entrance and assess the real door instead of guessing from a description.
  • In business since 1987, with owner and lead technician David Shar involved in the work.
  • Available 24/7, so if a door is compromised or a system fails outside business hours, you can still reach us at (323) 997-8867.
  • We explain the tradeoffs between keypads, cards and fobs in plain language and recommend what suits your business, not the most expensive option.
  • We keep life-safety in mind, making sure access control does not get in the way of people exiting a door safely.
  • Because we are also a full locksmith, we can handle the surrounding hardware, such as rekeying other doors, replacing worn deadbolts or fixing a failing door closer, during the same visit.

Access Control across Lomita

Lomita's business life runs along a few corridors. Pacific Coast Highway carries steady commercial traffic, the Narbonne Avenue corridor holds many small shops and offices, and Lomita Boulevard through the City Center area mixes storefronts with multi-unit buildings. In the 90717 ZIP code, many of these buildings date from the 1960s through the 1980s, and their doors and frames were built for a plain key, not for electronic hardware. That is why we look at each entrance in person before recommending anything.

The area is also a practical mix of commercial and residential. Small apartment complexes near Lomita Boulevard often have shared entrances, laundry rooms and storage areas that benefit from keypad or fob control instead of constant rekeying between tenants. Property managers around Harbor Hills and the surrounding streets sometimes want controlled access to an office, a maintenance room or a shared gate without handing out copied keys.

Lomita sits as a gateway to the Palos Verdes Peninsula, and many local businesses serve customers and contractors who come and go from the hill communities above. Whether you are near Lomita Park, a few blocks from the Lomita Railroad Museum, or along Western Avenue, we come to you. We are mobile only, so there is no shop to visit, just a technician who arrives ready to look at your door and get it working the way you need.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Lomita locksmith services

See all of our Lomita services, or our citywide access control page.

Access Control in Lomita — FAQs

What kinds of access control can you install for a Lomita business?
We install keypad, card and fob systems for business entrances. We help you choose among them based on how many people need access, how often credentials change, and what your door and frame can support. Call (323) 997-8867 to discuss your setup.
Is a keypad, card or fob system better for a small shop?
It depends. A keypad is simple and needs no credentials to hand out, but codes can be shared. Cards and fobs let you cancel one person's access without affecting others. We walk through the tradeoffs during the on-site assessment.
Do you come to my location, or do I visit a shop?
We are fully mobile and have no storefront. We come to your business in Lomita, inspect the entrance, and do the installation there.
Can access control work on older buildings in Lomita?
Often yes. Many buildings here date from the 1960s to the 1980s, and doors or frames may need preparation, but we evaluate each entrance in person before recommending hardware. Wiring routes and power access are checked first.
What happens if an employee loses a card or fob?
You deactivate that credential in the system, and it no longer opens the door. You do not need to rekey the lock. We show you how to do this at handoff, and you can call (323) 997-8867 if you need help.
Will the door still be safe to exit in an emergency?
Yes, that is part of how we plan. Business doors need to allow people to leave safely, so we choose lock types and configurations with exit in mind and test the door before we finish.
Can you install access control for an apartment complex or shared building?
Yes. Shared entrances, laundry rooms and storage areas are common uses. Managers can issue and cancel credentials as tenants change instead of rekeying repeatedly.
How much does access control installation cost?
It depends on the number of doors, the system type, door and frame condition, wiring needs, and how many credentials you need. We will talk through these factors and explain the scope once we see your entrance. You can reach us 24/7 at (323) 997-8867.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7