Open 24/7 · Greater Los Angeles & Ventura County

Crenshaw Lock

Lock Installation in Huntington Park · 24/7 mobile

Lock Installation in Huntington Park, California

Crenshaw Lock Company installs new locks in Huntington Park, California, on new doors or doors that never had one. We are fully mobile and available 24/7, coming to your home or storefront with hardware on the truck. Call (323) 997-8867 to talk through your door and get started.

  • Mobile to your Huntington Park location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7

Installing a lock where none existed before is a different job from replacing one. There is no old cutout to match, so the door itself decides everything: its thickness, its material, how it swings, and what is on the frame side. In Huntington Park that range is wide. You have 1920s Spanish Revival and Craftsman bungalows with original wood doors, dense older apartment buildings, and the early-20th-century masonry storefronts along Pacific Boulevard.

We do this work the way a careful carpenter would. Bore holes are measured and drilled to the right size, the strike is set into solid framing rather than a thin trim piece, and the finished lock is checked so the bolt throws smoothly without forcing the door. A new lock that binds in humid weather or sits loose in the jamb is only security on paper.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. We are mobile only, with no storefront to visit. We come to the door, look at what is actually there, and explain the options before we cut anything.

How it works in Huntington Park

  1. 1

    Tell us about the door

    Call (323) 997-8867 and describe the door: wood, hollow metal, aluminum storefront, or a brand-new slab. Tell us whether it is a home, an apartment unit, or a business. That helps us bring the right hardware.

  2. 2

    On-site assessment

    We check the door thickness, the condition of the frame, the swing direction, and any existing hardware. On older bungalow doors we look for dry rot or past patch repairs near the edge, because a new lock is only as strong as the wood holding it.

  3. 3

    Choose the hardware

    We go over deadbolt grades, handle sets, mortise options, or panic and exit hardware for commercial doors. You choose based on how the door is used, not on what is simply the most expensive item.

  4. 4

    Precise installation

    We mark, bore, and mortise the door, then fit the latch and set the strike plate into solid framing with long screws. Where a door needs reinforcement around the lock, we discuss it before we start.

  5. 5

    Test and key setup

    We operate the lock repeatedly with the door open and closed, check alignment, and confirm every key works. If you want several locks keyed alike, we can set that up on the spot.

  6. 6

    Walkthrough and cleanup

    We show you how the hardware works, point out any maintenance it needs, and clean up the work area before we leave.

Need lock installation in Huntington Park?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

What affects the price

  • Door material and construction: solid wood, hollow metal, and aluminum storefront doors each need different tools and techniques, which affects labor.
  • Type and grade of lock: a standard residential deadbolt, a high-security cylinder, a mortise lockset, and commercial panic hardware are very different products.
  • Number of locks: installing several at once, or keying them alike, changes the total of time and materials.
  • Door or frame preparation: a new door with no bore holes needs more work than one that is pre-drilled, and damaged or rotted framing may need reinforcement.
  • Code requirements: commercial and multi-unit doors may require specific exit hardware, which affects what we can install.
  • Time of service: after-hours and emergency calls are handled differently from scheduled daytime visits, and we will explain this when you call.

Why Huntington Park chooses us

  • Fully mobile and available 24/7, so installation does not have to wait for store hours or interrupt your workday.
  • Experience with older buildings: we are familiar with 1920s wood doors, original mortise hardware, and masonry storefront frames that do not behave like modern prehung doors.
  • Serving the area since 1987, with owner David Shar leading the work.
  • We explain options and tradeoffs before cutting, and we do not push hardware the door cannot properly support.
  • One visit can cover residential deadbolts and commercial hardware, so a shop owner who lives nearby can have both handled by one company.
  • We test everything before leaving, including alignment and every key.

Lock Installation across Huntington Park

Huntington Park has two very different kinds of doors. In neighborhoods like Walnut Park and the Firestone Park area, many homes are 1920s Spanish bungalows and Craftsman houses. When someone buys one near Salt Lake Park, the original hardware is often worn, mismatched, or missing a proper deadbolt. Adding a modern deadbolt to an old wood door takes care, because the stile may be narrow and the wood decades old. We size the bore and reinforce the strike so the upgrade actually improves security in ZIP code 90255.

Then there is the Pacific Boulevard district, one of the busiest retail corridors in the area. Many storefronts are early-20th-century masonry buildings, some with original mortise and transom hardware, while others have been updated with aluminum storefront doors. A new boutique opening on Pacific Blvd may need code-compliant panic or exit hardware and a rekey before opening day, and a clothing retailer may also need a lock for a roll-down grille. We plan these jobs around your opening schedule, and because we are mobile we can work before or after business hours.

We get calls from around Huntington Park City Hall, the Gage Avenue retail district, and along Florence, Slauson, Alameda, and Santa Fe. Wherever the door is, we come to you. There is no shop to visit.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Other Huntington Park locksmith services

See all of our Huntington Park services, or our citywide lock installation page.

Lock Installation in Huntington Park — FAQs

What is the difference between lock installation and lock replacement?
Installation adds a lock where none existed, such as on a new door or a door with no deadbolt. That means boring new holes and preparing the frame. Replacement swaps a lock into an existing cutout. Call (323) 997-8867 if you are unsure which applies.
Can you add a deadbolt to my old Spanish bungalow door?
Usually yes. Older wood doors can take a modern deadbolt if there is enough solid wood at the edge. We inspect the door first and reinforce the strike area so the new lock holds up.
Do you install panic and exit hardware for new Pacific Boulevard shops?
Yes. We can install panic and exit hardware for storefronts and rekey the entry before you open. Check your local requirements for your specific space, and we will help match the hardware to the door.
Can you work on the original mortise locks in historic storefronts?
Often, yes. Many 1920s mortise locks can be serviced or replaced with a compatible mortise lockset. Whether to repair or replace depends on the condition of the lock and the door, and we explain both options.
Can you install a lock on a roll-down security grille?
We can discuss grille locking options when we assess your storefront. The right solution depends on the grille design and how you open and close the shop each day.
Do you install locks at night or on weekends?
Yes. We are available 24/7 and fully mobile. For after-hours needs in Huntington Park, call (323) 997-8867 and we will work out the plan with you.
Can all my new locks use the same key?
In most cases, yes. We can key new locks alike so one key covers your front door, back door, and other entries. Tell us how many locks you need when you call.
Do I need to be there during installation?
Someone authorized should be present to confirm the door and the work, and to receive the keys at the end. If you are a landlord or business owner, tell us who will be on site.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7