Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Commercial Door Hardware in Glendale · 24/7 mobile

Commercial Door Hardware Repair and Replacement in Glendale, CA

Crenshaw Lock Company provides commercial door hardware repair and replacement in Glendale, California, covering storefront, aluminum-frame and mortise hardware. We are fully mobile and available 24/7, so we come to your business. Call (323) 997-8867 to describe the door and get help arranged.

  • Mobile to your Glendale location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Aluminum storefront door with mortise lock and pull handle
Open now(323) 997-8867

A commercial door works harder than almost anything else in a building. It opens and closes hundreds of times a day, gets leaned on by deliveries, and is slammed by wind tunnels between buildings. In Glendale, that means everything from aluminum-storefront retail around downtown to office lobbies along Brand Boulevard and older apartment buildings with tired entry hardware. When a closer drifts, a latch stops catching, or a panic device sticks, the door is both a security problem and a liability.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar built the business on mobile service. We are fully mobile, with no storefront to visit. We work on your site, whether it is a shop, restaurant, medical suite, office, or multi-unit residential property. Our commercial door hardware work covers repair first where repair makes sense, and replacement when parts are worn past the point of a reliable fix.

We work with the hardware types that dominate Glendale commercial buildings: narrow-stile aluminum storefront doors with pivots, rim and mortise cylinders, thumbturn and deadlatch setups, surface and concealed closers, exit devices, and traditional mortise lock bodies. We can also tie hardware work into rekeying and master-key planning, so the door and the keys are sorted in one visit rather than two.

How it works in Glendale

  1. 1

    Call and describe the door

    Call (323) 997-8867 and tell us what kind of door it is: aluminum storefront, wood or hollow metal, glass, or an older mortise setup. Tell us what is failing, such as a latch that will not retract, a closer that slams, or a lock that will not turn. Photos help if you can send them.

  2. 2

    On-site inspection

    We come to your location and look at the whole assembly, not just the part that is complaining. Misaligned frames, sagging hinges or pivots, and worn strike plates often cause what looks like a lock failure, so we check alignment, closer adjustment, and cylinder function first.

  3. 3

    Repair or replace recommendation

    We explain what can be repaired and what should be replaced, and why. If a mortise body or exit device has internal wear, we say so. If an adjustment or a new strike will do the job, we do that instead of selling you new hardware.

  4. 4

    Hardware work and keying

    We service or install the hardware, adjust the closer, and test latching and locking through repeated cycles. If you want new cylinders, rekeying, or keyed-alike sets, we handle that during the same visit where parts allow.

  5. 5

    Security check before we leave

    We confirm the door closes and latches on its own, that the lock engages fully, and that egress rules for the door still work, meaning people inside can leave without special knowledge. We walk you through any keys and settings before we go.

Need commercial door hardware in Glendale?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of door and frame, since narrow-stile aluminum storefront hardware differs from mortise lock bodies and heavy exit devices.
  • Whether the fix is an adjustment or repair, or a full replacement of locks, closers, or exit devices.
  • The grade and finish of the hardware you choose, including whether you need it to match existing fixtures.
  • How many doors are involved, and whether keying, rekeying, or a master-key system is part of the job.
  • Whether the work happens after hours, on a weekend, or as an emergency securing job versus a scheduled visit.
  • Parts availability, especially for older or discontinued mortise and storefront hardware that may need to be sourced.

Why Glendale chooses us

  • Fully mobile since 1987. We bring tools and common parts to your door rather than asking you to bring the door to us.
  • Available 24/7, which matters when a storefront will not lock at closing time and you cannot leave the business open overnight.
  • We are comfortable with older mortise hardware and not just modern catalog parts, and we try to service what is serviceable.
  • Hardware and keying are handled together, so a master-key or rekey project does not become a separate scheduling headache.
  • We tell you plainly whether a repair will hold or a replacement is the smarter choice, and explain the reasoning.
  • Owner-led operation under David Shar, with decades of field experience on residential, commercial, and multi-unit properties.

Commercial Door Hardware across Glendale

Glendale's commercial doors vary a lot by block. Downtown and along Brand Boulevard, near The Americana at Brand and the Alex Theatre, aluminum-frame storefronts and glass entries take constant daily use, and closers, pivots, and cylinders wear out together. Around the Glendale Galleria and along Central Ave, Glenoaks Blvd, and Colorado St, we see a mix of retail suites, offices, and service businesses that need dependable hardware and clean keying.

The city also has a large stock of 1960s to 1980s apartments and condos, many with older entry locks and intercom systems, and Glendale has a high share of renters. That creates real property-management work. A typical case is a building near downtown changing managers and needing 20 or more units rekeyed with a fresh master-key system so former keys no longer work. Brand Blvd high-rise condos and offices often use fob or access-control entries, where we can help with mechanical entry, hardware repair, and rekeying around the electronic side. Older buildings in Rossmoyne and Adams Hill, with 1920s Spanish and Mediterranean Revival character, sometimes have original mortise hardware that deserves servicing rather than removal, and we can key it alike with a new deadbolt.

We serve businesses and properties across Glendale, including ZIP codes 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208, as well as hillside areas such as Verdugo Woodlands near the Verdugo Mountains. Access by SR-134, SR-2, or I-5 lets us reach most parts of the city. Call (323) 997-8867 any hour.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Glendale locksmith services

See all of our Glendale services, or our citywide commercial door hardware page.

Commercial Door Hardware in Glendale — FAQs

Do you repair commercial door hardware in Glendale at night?
Yes. We are 24/7 and fully mobile, so if a storefront will not lock or a door is damaged after hours, call (323) 997-8867 and we will work to secure it.
Can you fix aluminum storefront doors?
Yes. We work on aluminum-frame and narrow-stile storefront doors, including cylinders, deadlatches, pivots, and closers. We check alignment too, since a misaligned door often mimics a bad lock.
Do you work on old mortise locks, like in Rossmoyne or Adams Hill?
We do. Original mortise hardware in 1920s buildings can often be serviced and kept in use. We can also key it alike with a new deadbolt if you want one key for everything.
Can you rekey an entire apartment building and set up a master-key system?
Yes. After a property-manager change, many owners want every unit rekeyed and a new master-key system. Call (323) 997-8867 with the unit count and lock types and we can plan the work.
What if I am locked out of a fob or high-security entry on Brand Blvd?
We can help with after-hours mechanical entry where it is possible and appropriate, and follow up with repair or rekeying. We will ask you to confirm you have the right to access the space.
How is the cost of commercial door hardware work determined?
It depends on the door type, whether it is repair or replacement, hardware grade, number of doors, keying needs, and timing. We discuss these factors before work begins.
Do I need to come to a shop?
No. We have no storefront. Everything is done on-site at your business or building. Call (323) 997-8867 to get started.
Will the door still meet exit requirements after your work?
We test every door so people inside can leave without special knowledge or tools. If something about your setup raises a code question, we flag it so you can confirm with the appropriate authority.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7