Open 24/7 · Greater Los Angeles & Ventura County

Crenshaw Lock

Panic Bar Installation in East Los Angeles · 24/7 mobile

Panic Bar Installation in East Los Angeles, California

Crenshaw Lock Company installs and repairs panic bars, exit devices and emergency-exit hardware throughout East Los Angeles, available 24/7 and fully mobile. We come to your shop, office or building with the hardware and tools. Call (323) 997-8867 to talk through your door and exit requirements.

  • Mobile to your East Los Angeles location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7

A panic bar has one job that matters above all others: when someone pushes on it, the door opens, every time, without a key and without thinking. In East Los Angeles, where Whittier Boulevard, Cesar Chavez Avenue and Atlantic Boulevard are lined with small businesses, that job gets harder because many of those doors were not built with modern exit hardware in mind. Aluminum storefronts, older wood and steel back doors, and doors that open onto alleys all need different solutions.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar built the business around coming to the customer. We are fully mobile, so there is no storefront to visit. We bring exit devices to your location, assess the door you actually have, and install or repair the hardware on site. That matters for a restaurant, a market, a church hall, a salon or a small warehouse that cannot leave a back door unsecured overnight.

We handle new panic bar installations, replacement of worn or damaged devices, repairs for bars that stick, rattle or fail to latch, and the trim and strike work that goes with them. We also help business owners think through how the exit hardware fits with the rest of their security, including roll-down gates and keyed entry doors. We are a locksmith, not a code authority, so for questions about what your occupancy requires, we recommend confirming with the local building and fire officials. We will make sure the hardware we install works smoothly and reliably.

How it works in East Los Angeles

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us what kind of door it is (aluminum storefront, hollow metal, wood), whether it is a single or double door, and whether you need a new installation or a repair. Photos of the door and frame help us bring the right parts.

  2. 2

    On-site assessment

    We come to your East Los Angeles location and look at the door, frame, existing hardware, and how the door swings and closes. A panic bar only works well on a door that hangs and latches properly, so we check alignment, hinges and the strike area before anything is mounted.

  3. 3

    Choosing the right device

    We discuss the exit device type that suits your door: rim device, surface or concealed vertical rod, or a device for a pair of doors. We also talk about whether the outside needs a key cylinder, a trim, or no entry at all, based on how you use the door.

  4. 4

    Installation and fitting

    We mount the device, set the strike, and adjust the latch so the door closes and holds securely while releasing with a light push. On aluminum storefronts we use hardware suited to narrow stiles; on steel or wood doors we reinforce where needed.

  5. 5

    Testing and walkthrough

    We operate the bar repeatedly from inside, check the exterior side, and confirm the door fully latches under normal closing. We show you how to adjust or maintain it and point out anything about the frame or door that could cause trouble later.

  6. 6

    Related hardware and follow-up

    If the same visit shows a worn lock, a stiff closer, or a gate padlock that needs replacing, we can address it while we are there. If you need rekeying on the entry side, we coordinate it so your keys stay consistent.

Need panic bar installation in East Los Angeles?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

What affects the price

  • The type of exit device: a basic rim device costs differently from a vertical rod or a heavier-duty model for a pair of doors.
  • Door material and condition, since aluminum storefronts, hollow metal and older wood doors each need different mounting and sometimes reinforcement.
  • Whether the job is a new installation or a repair or replacement of an existing bar, including how much of the old hardware must be removed.
  • Single versus double doors, and whether the doors need alignment, new strikes or frame work before the device will latch properly.
  • Exterior trim and keying choices, such as a key cylinder, a lever trim, or no outside access, and whether keys must match other locks.
  • Time of day and urgency, since an after-hours emergency call is handled differently from a scheduled installation.

Why East Los Angeles chooses us

  • Fully mobile service: we bring parts and tools to your East Los Angeles shop or building, so you are not hauling a door or hardware anywhere.
  • Operating since 1987, with David Shar as owner and lead technician, which means long experience with the older doors and frames common in this area.
  • Available 24/7, useful when a failed exit door leaves a business unable to close up safely.
  • We fit the hardware to the door you actually have, checking hanging and latching first rather than bolting a device onto a door that will not close right.
  • We can handle the whole entry picture, including panic bars, storefront locks, gate padlocks and rekeying, in one visit.
  • Honest guidance: we tell you what the hardware does and does not do, and we point you to local officials for code-specific questions.

Panic Bar Installation across East Los Angeles

East Los Angeles is a dense, working-class community where small businesses carry much of the street life. Along the Whittier Boulevard commercial corridor, Cesar Chavez Avenue and the Atlantic Boulevard retail strip, you find aluminum storefronts, roll-down security gates and back doors that open to alleys and parking areas. Those back and side doors are where panic bars usually matter most, and where years of use, weather and attempted break-ins leave hardware worn or damaged.

We work across the area's ZIP codes, including 90022 near Atlantic and Whittier, 90023 and 90063, and the neighborhoods of Belvedere, Maravilla, City Terrace and Eastmont. A market in Belvedere, a small office near the East LA Civic Center, a hall near City Terrace Park or a shop in Maravilla may each have a different door, but they share the same need: an exit that opens easily from inside and still keeps the building secure.

Because we are mobile, getting to you does not depend on a shop location. The East Los Angeles Interchange, where I-5, I-10, US-101 and SR-60 meet, makes the area easy to reach from across the region. If a Whittier Boulevard owner also has a roll-down gate padlock that will not release, we can address that during the same visit alongside the exit hardware. Call (323) 997-8867 any time to get started.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Other East Los Angeles locksmith services

See all of our East Los Angeles services, or our citywide panic bar installation page.

Panic Bar Installation in East Los Angeles — FAQs

Do you install panic bars on aluminum storefront doors in East Los Angeles?
Yes. Many shops along Whittier Boulevard and Atlantic Boulevard have aluminum storefront doors with narrow stiles, and we use exit devices suited to them. Call (323) 997-8867 and describe the door so we can bring the right hardware.
Can you repair a panic bar that sticks or will not latch?
Usually, yes. Sticking and failed latching are often caused by door alignment, a worn strike or a damaged mechanism. We inspect the door and frame, then adjust, repair or replace the device as needed.
Are you available after hours or on weekends?
Yes, we are available 24/7 and fully mobile. If an exit door is broken and you cannot lock up safely, call (323) 997-8867 any time.
Do I have to come to a shop to choose a device?
No. We have no storefront. We come to your East Los Angeles location, look at the door, and talk through the options on site.
Does a panic bar mean anyone can open the door from outside?
No. A panic bar releases from the inside. The outside can be fixed with no access, a key cylinder or a trim, depending on how you want the door to work. We help you choose.
Will you tell me what my business needs to meet code?
We are locksmiths, not code officials, so for occupancy-specific requirements we recommend checking with local building and fire authorities. We will install the hardware you decide on so it works smoothly and reliably.
Can you also help with my roll-down security gate padlock?
Yes. If a gate padlock will not release, we can cut and replace it, and we can do that during the same visit as your exit hardware work. Call (323) 997-8867 to describe the situation.
How is the price of a panic bar installation determined?
It depends on the device type, door material and condition, single or double doors, trim and keying choices, and urgency. After seeing the door we explain what applies to your job before work begins.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7