Open 24/7 · Greater Los Angeles & Ventura County

Crenshaw Lock

Commercial Door Hardware in Compton · 24/7 mobile

Commercial Door Hardware in Compton, CA

Crenshaw Lock Company provides commercial door hardware repair and replacement in Compton, California, covering storefront, aluminum-frame and mortise hardware. We are fully mobile and available 24/7, so we come to your business. Call (323) 997-8867 to describe the door and get help started.

  • Mobile to your Compton location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7

A commercial door works harder than almost anything else in a building. It gets opened hundreds of times a day, slammed by wind and carts, and tested by anyone who wants in after hours. In Compton, that means storefronts along Compton Blvd and Long Beach Blvd, shops near Gateway Towne Center, and industrial buildings out toward Alameda St. When the hardware wears out, the door stops protecting the business and starts costing it.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. Commercial door hardware is a specialty of its own. Aluminum-frame storefront doors use narrow stiles, pivot or offset hardware, and specific cylinders and latches. Older mortise-lock doors carry a lock body set into the edge of the door, with trim and strikes that have to line up precisely. We repair and replace both kinds, along with the closers, panic devices, strikes and cylinders that go with them.

We are mobile only. There is no storefront to visit, because our work happens at your door. We come to you, look at what is failing, and explain your options in plain terms. Sometimes a worn part can be repaired and the door keeps serving you. Other times replacement makes more sense, and we will tell you which is which.

How it works in Compton

  1. 1

    Call and describe the door

    Call (323) 997-8867 any hour. Tell us what type of door you have (aluminum storefront, wood or hollow metal with a mortise lock, or glass), what it is doing, and whether the business is currently secure. This lets us bring the right parts.

  2. 2

    On-site inspection

    We come to your location and examine the hardware, frame, strike, closer and cylinder. Many problems that look like a bad lock are really alignment, a worn latch or a failing closer, so we check the whole door.

  3. 3

    Repair or replace, explained plainly

    We lay out what can be repaired and what should be replaced, and why. You decide before work begins. Where a door must be secured tonight, we can discuss a safe temporary fix and a permanent one.

  4. 4

    Installation and fitting

    We install or rebuild the hardware, whether storefront deadlatches, mortise lock bodies, push/pull sets, panic devices or closers, and fit it so the door latches cleanly without forcing.

  5. 5

    Keying and testing

    We can rekey or key new cylinders so you control who has access, then test the door through repeated cycles, with the lock, closer and any exit device checked together.

  6. 6

    Walkthrough and handoff

    Before we leave, we show you how the hardware works, hand over keys, and point out any other door issues worth watching so the next problem does not arrive as an emergency.

Need commercial door hardware in Compton?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

What affects the price

  • The type of door: aluminum storefront, mortise, hollow metal or wood each use different hardware and labor.
  • Whether the existing hardware can be repaired or the lock body, trim or strike needs full replacement.
  • The grade and style of hardware chosen, including panic or exit devices and closers.
  • Whether the work is urgent after-hours service or scheduled during normal business hours.
  • The number of doors involved and whether they should be keyed alike or to a master system.
  • Condition of the frame and door, since damage from a forced entry or years of wear can add repair work.

Why Compton chooses us

  • Fully mobile service, 24/7: we work at your door instead of asking you to bring anything to a shop.
  • Experience since 1987 with commercial hardware, including older mortise locks that many generalists avoid.
  • Owner involvement: David Shar leads the business, so standards stay consistent.
  • Honest repair-versus-replace advice, so you do not pay for new hardware when a part will do.
  • We look at the whole door system, including closers, strikes and alignment, not just the lock.
  • Clear explanation of options before work starts, with no pressure and no guesswork.

Commercial Door Hardware across Compton

Compton's commercial buildings are as varied as its neighborhoods. Along Compton Blvd and Long Beach Blvd, storefront strips house shops, clinics and offices with aluminum-frame glass doors that take daily abuse. Near Gateway Towne Center, retail doors need hardware that stands up to constant traffic and still locks reliably at closing. In Downtown Compton, around the Civic Center and City Hall, older commercial buildings may still have mortise hardware that deserves careful repair rather than a rushed swap.

Industrial and service businesses near Alameda St, and those closer to Compton/Woodley Airport, often have a mix of storefront doors, steel doors and roll-up gates, each with its own hardware needs. A business in ZIP 90220 or 90221 may be dealing with an after-hours lockout or a door that will not latch, while one in 90222 may need a planned hardware upgrade across several doors. We also see Compton College-area and Leland-area businesses ask for keyed-alike setups to simplify staff access.

With I-710, I-105 and SR-91 all crossing the city, we reach commercial customers throughout Compton from Sunny Cove to the edges of Richland Farms. Call (323) 997-8867 and we will come to the door, day or night.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Other Compton locksmith services

See all of our Compton services, or our citywide commercial door hardware page.

Commercial Door Hardware in Compton — FAQs

What kinds of commercial door hardware do you repair in Compton?
We work on aluminum-frame storefront hardware, mortise locksets, push/pull sets, door closers, panic and exit devices, strikes and cylinders. Call (323) 997-8867 and describe your door.
Do you offer emergency service for a storefront that will not lock?
Yes. We are mobile and available 24/7. If your door will not latch or you are locked out, call (323) 997-8867 and we will work on securing the business.
Can an old mortise lock be repaired, or must it be replaced?
Often it can be repaired. Mortise bodies are durable, and worn springs, cylinders or trim can frequently be replaced. We inspect it and tell you honestly if replacement is the better choice.
Why does my aluminum storefront door not latch properly?
Common causes include a misaligned strike, a sagging door, a worn latch or a failing closer. We check the whole door system rather than just swapping the lock.
Do you have a shop I can visit?
No. Crenshaw Lock Company is fully mobile, so we come to your business anywhere in Compton instead of operating a storefront.
Can you key several doors alike for my business?
Yes. We can rekey or install cylinders so multiple doors work with one key, or set up a structure that limits access by area. Call (323) 997-8867 to discuss it.
How is the cost of commercial door hardware work determined?
It depends on door type, hardware grade, whether repair or replacement is needed, the number of doors, and the time of service. We explain the factors before any work begins.
Do you also handle roll-up gate padlocks?
Yes, we can replace padlocks and related locking hardware on roll-up gates, and we can pair that with storefront door work during the same visit.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7