Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Gate Lock Repair in Commerce · 24/7 mobile

Gate Lock Repair in Commerce, California

Crenshaw Lock Company provides 24/7 mobile gate lock repair in Commerce, California, covering chain-link yard gates, loading-dock gates, keypad locks and smart gate hardware. We come to your site with tools and parts. Call (323) 997-8867 any hour to describe the gate and get help.

  • Mobile to your Commerce location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Keyed lock on a wrought iron gate at golden hour
Open now(323) 997-8867

Commerce is a city built around moving freight. Between the warehouses, distribution centers, cold-storage buildings and the BNSF Hobart intermodal rail yard, a lot of what keeps this place running sits behind a gate. When a gate latch stops catching, a keypad goes dead, or a lock gets cut at two in the morning, the whole property is exposed until it is fixed. That is the kind of call we handle.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and we are fully mobile. There is no storefront to visit. We bring the work to your gate, whether that is a swing gate on a truck yard off Washington Blvd, a rolling chain-link gate near Atlantic Blvd, or the side gate on a small bungalow in Rosewood Park. Owner and lead technician David Shar and our team work on mechanical latches, high-security padlock and hasp setups, keypad locks and smart gate controls.

Gate hardware lives a hard life. It sits outdoors, gets hit by trucks, collects dust and grit from freight traffic, and is opened many times a day. Most failures are repairable: a worn latch, a bent strike, a sagging gate that no longer lines up, a seized cylinder, a keypad with corroded contacts. Where repair does not make sense, we will say so plainly and talk through a replacement, so you are not paying to fix something that will fail again next month.

How it works in Commerce

  1. 1

    You call, we talk through the gate

    Call (323) 997-8867 and tell us what kind of gate it is, what the lock is doing, and whether the property is secure right now. A swing gate with a seized cylinder is a different job from a sliding gate with a dead keypad, and a few questions up front let us bring the right parts.

  2. 2

    We come to you

    We are a mobile service, so a technician drives to the site with tools, cylinders, latches, hasps and padlocks on the vehicle. We work around, not through, your operations where we can, which matters on busy dock and yard properties.

  3. 3

    Inspect the whole latch path

    Before replacing anything we check the lock, latch, strike, hinges and gate alignment. In practice a lot of gate lock complaints are really a sagging gate or a bent post pulling the latch out of position. We find the actual cause first.

  4. 4

    Repair or replace, with a clear recommendation

    We explain whether the existing hardware can be repaired, rekeyed or needs to be swapped for something sturdier, such as a high-security padlock with a protected hasp. You decide before we start.

  5. 5

    Install, adjust and test

    We install the work, adjust alignment and test the gate repeatedly from both sides. For keypad or smart locks we set codes, check power and confirm the unit handles weather and heavy daily use.

  6. 6

    Hand over keys and codes

    You leave with working keys or fresh codes, and we go over who should have access. If an employee has left or a lock was cut, we can rekey so old keys and codes no longer work.

Need gate lock repair in Commerce?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of gate and lock: a simple latch repair is a different scope of work than a keypad, smart or high-security padlock and hasp system.
  • Whether the hardware can be repaired or must be replaced, and the grade of replacement hardware you choose, such as standard versus high-security padlocks.
  • Gate condition and alignment, since bent frames, worn hinges or sagging gates may need correction before any lock works reliably.
  • Number of gates, locks or keyed-alike cylinders involved, particularly for properties wanting everything on one master-key system.
  • Electronics and power: keypad and smart locks may involve batteries, wiring, controllers or access integration.
  • Time of day and urgency, since after-hours emergency calls differ from scheduled work. We will explain the factors when you call rather than guess.

Why Commerce chooses us

  • Fully mobile, 24/7. We come to your gate at any hour, which suits yards and warehouses that operate around the clock.
  • In business since 1987, so we have seen most failures that outdoor gate hardware can produce, from seized cylinders to truck-damaged latches.
  • Comfortable with industrial hardware: high-security padlocks like Abloy and American, hasps, roll-up door cylinders, panic hardware and master-key systems.
  • We diagnose before we sell. If the real problem is gate alignment or a damaged post, we tell you rather than just swapping the lock.
  • Repair-first approach. If your existing hardware can be fixed, we say so, and we only recommend replacement when it makes sense.
  • We cover both commercial and residential gates, so a Washington Blvd truck yard and a Rosewood Park side gate get the same straight advice.

Gate Lock Repair across Commerce

Commerce's gates tend to fall into a few groups. Around the Hobart rail yard and the distribution centers, you find chain-link and swing gates guarding truck courts, trailer storage and dock areas, usually secured with heavy padlocks and hasps. Along Washington Blvd and Atlantic Blvd, aluminum-storefront commercial properties often have rear service gates and side yards that rely on a single latch. Near the Citadel district and the Citadel Outlets, loading and service areas add their own gates and access control. We serve all of these across ZIPs including 90040, 90022 and 90023.

A typical commercial call here might be a Washington Blvd warehouse owner whose loading-dock gate padlock was cut overnight. The fix is usually a high-security padlock paired with a hasp that is hard to attack with bolt cutters, and we can also look at whether the gate itself leaves the hasp exposed. Another common scenario is a distribution tenant near the Hobart yard letting someone go, which means dock padlocks, gate locks and office hardware should be rekeyed or reset together so the old keys stop working.

Residential gate work is a smaller part of Commerce, but it is real. In Rosewood Park and Bandini, many 1940s and 1950s stucco bungalows have side gates with old latches and padlocks that have rusted shut, and aging deadbolts on the house itself. Drivers heading in from I-5, I-710 or SR-60 can reach most of the city quickly, and we work throughout Commerce, including near Bristow Park, the Commerce Casino and the Commerce Library. Call (323) 997-8867 and we will come to you.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Commerce locksmith services

See all of our Commerce services, or our citywide gate lock repair page.

Gate Lock Repair in Commerce — FAQs

Do you repair gate locks in Commerce at night or on weekends?
Yes. We are available 24/7 and fully mobile. Call (323) 997-8867 at any hour and we will talk through the situation and come to your gate.
My dock gate padlock was cut. What should I do?
If it is safe, secure the gate as best you can and call us at (323) 997-8867. We can replace the padlock and, where needed, the hasp with high-security hardware that resists cutting, and we can look at how the gate is exposed.
Can you fix keypad and smart gate locks?
Yes. We repair and install keypad and smart gate locks, including checking power, resetting codes and confirming the unit holds up outdoors. Some systems tied to a controller may need additional work, which we will explain.
Is it better to repair or replace a gate lock?
It depends on the condition. A worn latch or misaligned strike is often repairable. A badly corroded or repeatedly failing lock is usually better replaced. We give you our honest recommendation before work begins.
Can you rekey gate locks after an employee leaves?
Yes. We can rekey gate locks, dock padlocks and office hardware so old keys no longer work, and reset master-key arrangements for larger tenants. Call (323) 997-8867 to talk through what needs to change.
My gate won't latch even though the lock seems fine. Why?
Very often the gate has sagged or the post has shifted, so the latch no longer lines up with the strike. We check alignment and hinges as part of every visit, since fixing that can solve the problem without a new lock.
Do you work on residential gates in Rosewood Park or Bandini?
Yes. We repair side-gate latches and padlock setups on older homes and can also help with aging deadbolts. We are mobile, so we come to the property.
How is the price of gate lock work determined?
It depends on the gate and lock type, whether repair or replacement is needed, the hardware grade, the number of locks, and the urgency of the call. We explain these factors up front so you know what drives the cost.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7