Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Calabasas · 24/7 mobile

Panic Bar Installation in Calabasas, CA

Crenshaw Lock Company provides mobile panic bar installation and repair in Calabasas, California, 24 hours a day, seven days a week. We install and service exit devices and emergency-exit hardware at your location. Call (323) 997-8867 to talk through your door and get started.

  • Mobile to your Calabasas location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is one of the few pieces of hardware that has to work perfectly on the worst day your building ever has. It lets people leave quickly with a single push, without a key, a knob, or any knowledge of how the lock works. At the same time, the door still has to hold up against forced entry from the outside. Getting that balance right depends on the door, the frame, the occupancy of the space, and how the door is actually used day to day.

In Calabasas, the places that need this hardware are varied. There are lifestyle retail and aluminum-storefront spaces like those around The Commons at Calabasas, offices and professional suites near Calabasas Rd and Parkway Calabasas, fitness and studio spaces, and the back-of-house doors that nobody thinks about until an inspection or an incident. Some doors are brand new and some have worn exit devices that stick, rattle, or no longer latch cleanly.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, led by owner and lead technician David Shar. We are fully mobile, so there is no storefront to visit. We come to your door, look at what is actually there, and install or repair the exit hardware on site. Because we do not guess at code requirements for you, we encourage you to confirm what your local fire authority or building department expects for your occupancy, and we will work with that guidance when selecting and fitting the device.

How it works in Calabasas

  1. 1

    Call and describe the door

    Phone (323) 997-8867 and tell us about the opening: single or double door, glass, aluminum, hollow metal, or wood, and whether you are replacing an old device or adding a new one. Photos of the door, frame, and any existing hardware help us arrive prepared.

  2. 2

    On-site assessment

    We come to you and inspect the door's condition, the frame, the swing direction, the stile width on aluminum storefronts, and how the door is used. We check whether the door aligns and closes properly, because a panic bar cannot perform well on a sagging or dragging door.

  3. 3

    Choosing the right exit device

    We talk through the options: rim devices, vertical rod devices, concealed rod types, and mortise-style hardware. We also discuss the outside trim, such as a key cylinder, lever, or no trim at all, based on whether the door should be entered from outside. If alarms or access control are involved, we plan for that now.

  4. 4

    Installation and alignment

    We mount the device, set the strike, and adjust the latch engagement so the door catches reliably and releases with a light push. On existing doors we address worn holes, loose reinforcement, and misaligned strikes rather than just bolting new hardware on top of a problem.

  5. 5

    Function testing

    We cycle the device repeatedly from the inside and test the outside trim and keying if present. We confirm the door closes fully on its own and that nothing binds, rubs, or hangs up. If an alarm or door position switch is part of the setup, we verify it still behaves as intended.

  6. 6

    Walkthrough and follow-up care

    We show you how the device operates, how to check it periodically, and what signs of wear to watch for, such as a bar that sticks or a latch that no longer extends fully. Keys and any cylinder details are handed over so you can manage access going forward.

Need panic bar installation in Calabasas?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of exit device: a basic rim device differs from vertical rod, concealed rod, or mortise-style hardware in both parts and labor.
  • Door material and condition, including aluminum storefront stiles, hollow metal, or wood, and whether the door and frame need adjustment or reinforcement first.
  • Single versus double doors, since double openings often involve additional hardware such as mullions or astragals.
  • Outside trim and keying choices, including key cylinders, lever trim, or keyed-alike requirements to match existing locks.
  • Integration with alarms, door position switches, or electric access control that must be accounted for during installation.
  • Whether the job is a new installation, a replacement of a worn device, or a repair of existing hardware, and the time of day the work is requested.

Why Calabasas chooses us

  • Fully mobile service: we work at your door in Calabasas rather than asking you to bring anything to a shop, because we do not have a storefront.
  • Available 24/7, which matters when a door has been forced, an exit device has failed, or a space cannot be left unsecured overnight.
  • Experience since 1987 across residential, commercial, and automotive locksmith work, with David Shar as owner and lead tech.
  • We fix the door as well as the hardware, since many panic bar problems come from misalignment, sag, or worn reinforcement rather than the device itself.
  • Honest recommendations: we will tell you if a repair is enough, and we point you to your local fire authority for occupancy requirements rather than guessing at them.
  • We understand how exit hardware ties into the rest of your security, from keyed outside trim to alarm contacts and master key planning.

Panic Bar Installation across Calabasas

Calabasas is a mix of polished commercial corridors and quiet, gated residential hillsides, and that shapes the panic bar work we see. Along Calabasas Rd and in Old Town Calabasas, older buildings and small suites often have back doors with tired or mismatched exit hardware. Around The Commons at Calabasas and along Parkway Calabasas, aluminum-storefront retail and restaurant spaces need devices that fit narrow stiles and hold up to constant use. Offices near Las Virgenes Rd and the US-101 (Ventura Freeway) corridor often have stairwell and rear-exit doors that deserve a periodic check.

Panic bars are not only for businesses. Calabasas has many large properties in The Oaks, Calabasas Hills, and Mulwood, and some include home gyms, studios, wine rooms, detached guest buildings, or HOA clubhouse and amenity spaces where an exit device makes sense. Because many neighborhoods are guard-gated, we find it helpful to coordinate access through the gatehouse before we arrive so work starts without delay.

If your property is in the 91302 ZIP code, from the commercial stretches near the freeway to the hillside streets off Mulholland Hwy and Old Topanga Canyon Rd, call (323) 997-8867. We will talk through the door, the type of building, and what you are trying to achieve, then come to you to handle the installation or repair.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Calabasas locksmith services

See all of our Calabasas services, or our citywide panic bar installation page.

Panic Bar Installation in Calabasas — FAQs

Do you install panic bars on aluminum storefront doors in Calabasas?
Yes. Aluminum storefront doors are common around retail areas like The Commons at Calabasas, and they need devices sized for narrow stiles. Call (323) 997-8867 and describe the door, and we will recommend suitable hardware.
Can you repair a panic bar instead of replacing it?
Often, yes. Many failures come from a misaligned strike, a sagging door, or worn parts. We inspect on site and tell you honestly whether repair is enough or replacement makes more sense.
Are you available after hours for a broken exit device?
We are available 24/7 and fully mobile. If an exit device has failed or a door cannot be secured, call (323) 997-8867 any time and we will work out the next step with you.
Do I need a panic bar for my business?
Requirements depend on occupancy type, size, and use, and are set by fire and building authorities. We recommend confirming with your local fire authority or building department. We can then install hardware that fits their guidance.
Can a panic bar still be locked from the outside?
Yes. Many exit devices can be paired with outside trim, such as a key cylinder or lever, so entry is controlled while exit stays free from the inside. We help you choose trim that suits how the door is used.
Can you work in a gated community like The Oaks?
Yes. We are mobile and can coordinate with the gatehouse. It helps to arrange access in advance so the technician can get in smoothly. Call (323) 997-8867 with the address and any gate instructions.
Can a panic bar connect to an alarm or access control?
Many can. Devices may be fitted with alarms or door position switches, or work with electrified trim. Tell us what system you have and we will plan the installation around it.
Do you have a shop I can visit?
No. Crenshaw Lock Company is fully mobile, so we come to your location in Calabasas. Call (323) 997-8867 to describe the door and arrange service.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7