Open 24/7 · Greater Los Angeles & Ventura County

(323) 997-8867
Crenshaw Lock

Panic Bar Installation in Beverly Hills · 24/7 mobile

Panic Bar Installation in Beverly Hills, California

Crenshaw Lock Company provides mobile panic bar installation and repair in Beverly Hills, California, available 24/7. We install and service panic bars, exit devices and emergency-exit hardware at your door, wherever it is. Call (323) 997-8867 to talk through your doors and get started.

  • Mobile to your Beverly Hills location
  • Available 24/7
  • Price quoted before we start
Call (323) 997-8867or tap to call — we answer 24/7
Commercial double exit doors fitted with horizontal panic bars
Open now(323) 997-8867

A panic bar is the one piece of hardware on a commercial door that has to work every time, for everyone, in the worst possible moment. When someone pushes the bar, the door must release and open without a key, a knob or any special knowledge. In Beverly Hills, where boutiques, restaurants, offices, medical suites, event spaces and condo buildings all share a small, densely used footprint, getting that hardware right matters for safety and for day-to-day security alike.

Crenshaw Lock Company has served Greater Los Angeles and Ventura County since 1987, and owner and lead technician David Shar built the business around being a fully mobile service. There is no storefront to visit. We come to your door, look at the frame, the door material, the swing and how the space is used, and then install or repair the exit device that fits. That might be a rim device on a steel back door, a vertical rod device on a double door, or a repair to an older bar that sticks, rattles or no longer latches cleanly.

Beverly Hills buildings vary a great deal. A Golden Triangle shop with an aluminum storefront has very different mounting needs from a hillside property with a service entrance or a mid-century commercial building with an old steel door. We treat each opening on its own terms, and we explain what we recommend and why before work begins. If your door has an emergency, after-hours or security-related problem, you can call us any hour of the day or night.

How it works in Beverly Hills

  1. 1

    Talk through the door and its use

    We start with a call to (323) 997-8867. Tell us what the door does: a rear exit from a retail floor, a stairwell door, a double door at an event space. We ask about the door material, whether it is single or double, and whether you are replacing an existing bar or adding one.

  2. 2

    Inspect the opening on site

    Because we are mobile, we come to the building. We check the door's thickness and material, the frame, the swing direction, the hinges, the closer and how the existing latch engages. A bar mounted on a door that sags or drags will not work well, so we look at the whole opening, not just the hardware.

  3. 3

    Choose the right exit device

    We recommend a device type that suits the door: rim, surface vertical rod, concealed vertical rod or mortise-style. We talk about whether the outside needs a key cylinder, a lever trim or no trim at all, and how the device fits your security needs without ever blocking free exit from inside.

  4. 4

    Install, align and adjust

    We mount the device, set the strike, and adjust the latch so it engages firmly and releases with a light push. On aluminum storefront doors and older steel doors we pay close attention to mounting points and reinforcement so the hardware stays solid under daily use.

  5. 5

    Test the full operation

    We operate the bar repeatedly from the inside, check the outside trim or key function, confirm the door closes and latches on its own, and make sure nothing binds. We want you to see it working before we leave.

  6. 6

    Walk through care and next steps

    We show you how the device works, what to watch for over time, and what simple maintenance keeps it dependable. If we notice related issues like a worn closer or a loose strike, we point them out so you can decide what to do.

Need panic bar installation in Beverly Hills?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

What affects the price

  • The type of exit device: a basic rim device, a vertical rod device for double doors and a heavier-duty or mortise-style unit are different hardware with different cost.
  • Door material and condition, since aluminum storefront, hollow metal, wood and older steel doors each need different mounting methods and sometimes reinforcement.
  • Whether this is a new installation or a replacement, because removing an old device and repairing the old prep can add or save work.
  • Single versus double doors, and whether the opening needs a vertical rod, an astragal or a removable mullion.
  • Outside trim and key requirements, including whether you want a keyed cylinder, a lever trim or a fully exit-only door.
  • The hour and location of the call, since after-hours work and hard-to-reach properties can affect the overall job.

Why Beverly Hills chooses us

  • We are fully mobile, so the work happens at your door with no need to bring the door to a shop or visit a storefront.
  • Crenshaw Lock Company has been serving Greater Los Angeles and Ventura County since 1987, so we have seen a wide range of door types and older hardware.
  • David Shar, the owner and lead technician, leads the business, so your questions get answered by someone who knows the trade.
  • We are available 24/7, which matters when a failed exit device leaves a door unsecured or unusable overnight.
  • We look at the whole opening, including door, frame, closer and strike, instead of just swapping a bar onto a door that will not support it.
  • We explain the options in plain language and tell you what we recommend and why before we start.

Panic Bar Installation across Beverly Hills

Beverly Hills packs an unusual mix of commercial doors into a small area. In the Golden Triangle, around Rodeo Drive and Canon Dr, many shops and offices use aluminum storefront doors with mortise cylinders, and those frames call for careful hardware selection when adding or replacing an exit device. Along Wilshire Blvd and Santa Monica Blvd, you find office buildings, medical suites, restaurants and condo properties where stairwell and rear service doors rely on dependable panic hardware. Properties in the 90210 and 90212 ZIP codes, near landmarks like the Beverly Wilshire, tend to have a mix of high-traffic public doors and quieter back-of-house exits.

Further out, Beverly Hills includes areas where private and commercial uses meet in less obvious ways. Event spaces, hospitality properties and estate-adjacent service buildings around Sunset Blvd, Coldwater Canyon Dr and Benedict Canyon Dr may have exit doors that are used rarely but must work instantly. In neighborhoods like The Flats, Trousdale Estates and the Beverly Hills Post Office area, a service or utility door may need a discreet exit device that does not clash with the look of the property. Calls from 90211 and 90210 often involve this kind of careful, low-profile work.

Whatever the building, we come to you, any time of day or night. If a bar is sticking, a door will not latch, or you need a compliant exit device on a new opening, call (323) 997-8867 and we will talk through what the door needs.

Locked out or need a locksmith now?

24/7 Mobile Locksmith across Greater Los Angeles & Ventura County. We answer 24/7.

Call (323) 997-8867

Other Beverly Hills locksmith services

See all of our Beverly Hills services, or our citywide panic bar installation page.

Panic Bar Installation in Beverly Hills — FAQs

What is a panic bar and where is one needed?
A panic bar, also called an exit device, lets people leave a building by pushing a bar across the door instead of turning a knob. They are common on commercial doors that serve many people, such as stores, restaurants, offices and stairwells. For your specific door, call (323) 997-8867 and we can talk through the use.
Do you install panic bars on aluminum storefront doors in the Golden Triangle?
Yes. Aluminum storefront doors need devices and mounting methods suited to their narrow stiles and frames. We inspect the door on site and recommend hardware that fits it properly, so the device stays secure and works smoothly.
Can you repair an existing panic bar instead of replacing it?
Often, yes. Sticking latches, loose mounting, misaligned strikes and worn parts can frequently be corrected. If the device is too worn or does not suit the door, we will tell you honestly and explain the replacement options.
Can you work after hours or on weekends?
Yes. Crenshaw Lock Company is available 24/7 and fully mobile. If a failed exit device leaves a door unsecured or unusable, call (323) 997-8867 at any hour.
Do you have a shop I can visit in Beverly Hills?
No. We are a mobile-only business with no storefront. We come to your property, inspect the door and do the work on site.
How is the cost of panic bar installation determined?
It depends on the device type, door material and condition, single versus double doors, trim and key needs, and whether it is a new install or replacement. We discuss these factors and the plan with you before starting.
Can a panic bar be locked from the outside?
Many exit devices can be paired with an outside trim or key cylinder so the door is secure from outside while still allowing free exit from inside. The right setup depends on how the door is used. We can go over the options when we inspect the opening.
Do you also handle other commercial lock work in Beverly Hills?
Yes. Along with exit devices, we handle commercial lockouts, rekeying, mortise cylinder work and related door hardware. For any of these, call (323) 997-8867.
DS

Reviewed by David Shar — Owner & Lead Technician

Crenshaw Lock Company has served Greater Los Angeles & Ventura County since 1987.

Last updated 2026-10-12.

Call (323) 997-8867 · Open 24/7